• Journal of Digital Contents Society
• /
• v.7 no.3
• /
• pp.147-151
• /
• 2006

In recent years, the Internation Standard ISO/IEC 18000-6 is announced and a new scheme of Type C is added to conventional standard. Among the RFID systems the ISO/IEC 18000-6 standard is the most interesting to companies due to its potential market growth. The operating frequency is between 860-960 MHz, and three kinds of RFID system are included in the standard, i.e. type A, B and C. In this paper, we implemented the data frame of type C with baseband coding using VHDL. The data frame is encoded based on Miller code and FM0. We showed the implementation results with waveforms. The data frame was proved that it is properly implemented by the experiment of transmission and receiving operation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.700-708
• /
• 2014

Jet engine modulation(JEM) is a frequency modulation phenomenon of the radar signal induced by electromagnetic scattering from a rotating jet engine turbine. Although JEM can be used as a representative radar target recognition method by providing unique information on the target, its recognition performance may be degraded in the observation range of weakly present JEM. Hence, this paper presents a method for extracting the JEM component by decomposing the radar signal into intrisic mode functions(IMFs) via complex empirical mode decomposition(CEMD) and by combining them based on signal eccentricity. Its application to various signals demonstrated that the proposed method improved the clarity of JEM analysis and could extend the effective observation range of JEM.

• Journal of Internet Computing and Services
• /
• v.23 no.4
• /
• pp.1-9
• /
• 2022

Recently, the functions of smart speakers have diversified, and the penetration rate of smart speakers is increasing. As it becomes more widespread, various techniques have been proposed to cause anomalous behavior against smart speakers. Dolphin Attack, which causes anomalous behavior against the Voice Controllable System (VCS) during various attacks, is a representative method. With this method, a third party controls VCS using ultrasonic band (f>20kHz) without the user's recognition. However, since the method uses the ultrasonic band, it is necessary to install an ultrasonic speaker or an ultrasonic dedicated device which is capable of outputting an ultrasonic signal. In this paper, a smart speaker is controlled by generating an audio signal modulated at a frequency (18 to 20) which is difficult for a person to hear although it is in the human audible frequency band without installing an additional device, that is, an ultrasonic device. As a result with the method proposed in this paper, while humans could not recognize voice commands even in the audible band, it was possible to control the smart speaker with a probability of 82 to 96%.

• 전자공학회논문지 IE
• /
• v.43 no.2
• /
• pp.80-86
• /
• 2006

The wireless communication based on LDPC and adaptive spatial-subcarrier coded modulation using MQAM for orthogonal frequency division multiplexing (OFDM) wireless transmission by using instantaneous channel state information and employing multiple antennas at both the transmitter and the receiver. Adaptive coded modulation is a promising idea for bandwidth-efficient transmission on time-varying, narrowband wireless channels. On power limited Additive White Gaussian Noise (AWGN) channels, low density parity check (LDPC) codes are a class of error control codes which have demonstrated impressive error correcting qualities, under some conditions performing even better than turbo codes. The paper demonstrates OFDM with LDPC and adaptive modulation applied to Multiple-Input Multiple-Output (MIMO) system. An optimization algorithm to obtain a bit and power allocation for each subcarrier assuming instantaneous channel knowledge is used. The experimental results are shown the potential of our proposed system.

• Journal of Convergence for Information Technology
• /
• v.10 no.2
• /
• pp.32-38
• /
• 2020

In this paper, we analyze the modulation scheme for high speed transmission in visible light communication system, and study non-orthogonal multiplexing, dimming level and transmission power ratio. Conventional visible light communication has a disadvantage in that it is difficult to multi-transmit to increase the transmission speed. Multi-transmission technique is necessary for high-speed transmission at the transmitter. Since general visible light communication has a limitation in multiple transmission, various researches for high-speed transmission have been conducted. In order to solve this problem, this paper proposes a multiple modulation scheme for high-speed visible light communication using non-orthogonal multiplex transmission scheme and a future research direction.

• Review of KIISC
• /
• v.26 no.4
• /
• pp.41-46
• /
• 2016

전통적으로 바이오인식기술은 출입국심사(전자여권, 승무원 승객 신원확인), 출입통제(도어락, 출입통제 근태관리), 행정(무인민원발급, 전자조달), 사회복지(미아찾기, 복지기금관리), 의료(원격의료, 의료진 환자 신원확인), 정보통신(휴대폰 PC 인터넷 인증), 금융(온라인 뱅킹, ATM 현금인출) 등 다방면에서 폭넓게 보급되어 실생활에서 널리 활용되고 있다. [그림1]은 신체적 특징(Physiological biometrics)과 행동적 특징(Behavioral biometrics)을 이용한 사용자 인증기술인 바이오인식기술의 유형과 함께 각 기술별 보안취약점(괄호 안 빨강색글자)을 나타내고 있다. 최근 들어, 모바일 지급결제서비스 ATM 인출기 인터넷전문은행 등과 같은 핀테크 분야에서 비대면 인증기술로 바이오인식기술이 각광을 받기 시작했다. 한편, 가짜지문 등 기존의 신체적 특징을 이용한 바이오인식기술의 위변조 위협에 대한 우려 존재함에 따라 뇌파 심전도 근전도 맥박 등 살아있는 사람의 행동적(신체의 기능적) 특징을 이용한 생체신호를 이용하여 비대면 인증기술로서 활용하기 위하여 주요 선진국에서 차세대 바이오인식 기술개발이 가속화되고 있는 추세이다.[1] 또한, 이러한 생체신호는 최근에 삼성전자, LG전자, 애플 등에서 스마트워치를 통해 심장박동수를 측정하고 스마트폰을 통하여 모바일 지급결제, 헬스케어 등과 같은 IoT 모바일 융복합 응용서비스에 활용될 전망이다. 본고에서는 뇌파 심전도(심박수)와 같은 생체신호를 측정하는 스마트워치 밴드형 의복형 또는 패치형태의 웨어러블 디바이스와 같은 생체신호센서, 생체신호 인증기술 및 관련표준화 동향을 고찰해 보기로 한다. 국내외 관련기술과 표준화 동향을 면밀히 분석하여 지난 2015년 5월29일에 발족한 국내외 전문가그룹인 KISA"모바일 생체신호 인증기술 표준연구회"(이하 KISA 표준연구회)가 구심점이 되어 한국형 생체신호를 이용한 차세대 텔레바이오인식기술에 대한 연구개발과 국내외 표준화 추진에 박차를 가할 계획이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1A
• /
• pp.58-64
• /
• 2006

A 900-MHz band transceiver has been developed for RFID reader applications. In the transmitter, a GaAs SPST switch is used for high speed switching and low power consumption. In the receiver, a double balanced mixer is used to compress even-harmonic products. The ASK demodulator which consists of an active filter and comparator is used to reject the unwanted in band interferers. The transceiver produces a maximum transmitting power of 30 dBm and exhibits an 5 m communication range with a 6-dBi gain antenna.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.4
• /
• pp.34-40
• /
• 2012

In wireless communication system, fading is an unavoidable problem. Hence, errors in form of BER are introduced with the transmitted signal. It is necessary to recognize the behavior of these errors in different fading channels. To obtain the mathematical solution for the average bit error rate(BER) of coherent MPSK, some techniques are presented. In this paper, the impact of diversity is also analyzed over slow and flat Rician fading channel. In here, the value of modulation index, M is varied and the effects of its variation are also depicted. So, these performance curves with different diversity values and fading parameter are useful to design and evaluate the radio channel for faithful communication system.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3123-3125
• /
• 1999

광기록 저장매체의 기록밀도가 더욱 올라가면서 현재 콤팩트디스크나 DVD(Digital Versatile Disc)에 사용되고 있는 d=2인 코드보다는 검출성능이 좋은 d=1인 코드에 대한 관심이 점점 높아지고 있다. 광기록 저장매체에 사용할 수 있는 코드가 갖추어야할 중요한 제한조건으로는 코드열의 전력밀도가 저주파에서 충분히 억압될 수 있어야 한다는 것이다. 광자기디스크나 하드디스크에서 사용된 적이 있는 (1.7)코드는 코드자체로서 DC억압능력을 갖고있지 않다. DC를 억압시키기 위해 보통 부가비트를 일정간격으로 삽입하거나 싱크를 이용하게 되는데 이와 같은 방법으로는 충분한 DC억압이 어렵거나 기록밀도를 올리는데 불리한 원인이 된다. 본 논문에서는 코드열 자체로서 DC억압능력을 갖고 있는 코드워드의 생성방식과 변조 알고리즘을 RLL(1,8)인 경우를 예로 제시하였다. 또한 본 논문에서 제시한 코드의 성능에 대한 검증으로 기존의 RLL(1,8)코드(1)와 본 논문에서 제시한 코드에 4%이하의 부가비트를 삽입하여 DC억압을 수행한 뒤 동일한 기록밀도에서 DC억압성능을 비교하였을 때 저주파 대역에서 $1^{\sim}5dB$이상의 개선효과가 있었음을 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.5
• /
• pp.450-459
• /
• 2009

RFID technologies, which allow collecting, storing, processing, and tracking information by wirelessly recognizing the inherent ID of object through an attached electronic tag, have a variety of application areas. One of the important parameters in designing such RFID systems is the read range within which the system recognizes the electronic tag. We present a novel method of designing an RFID tag required for long read range of RFID systems. The tag designed by the proposed method is battery-assisted to increase its forward-link read range and simultaneously, has backscattering modulation amplified to increase its reverse-link read range. We experimentally confirm that the minimum threshold power of the tag is - 23 dBm and the backscattering modulation gain is 28 dB, which is consistent with our simulation results. We also verify that the tag in this paper improves more than 2 times in terms of the read range compared to the existing commercial tags.