• Water for future
• /
• v.28 no.2
• /
• pp.169-180
• /
• 1995

The cost of a looped pipe network is affected by a set of loop flows. The mathematical model for optimizing the looped pipe network is expressed in the optimal set of loop flows to apply to a stochastic optimization method. Because the feasible region of the looped pipe network problem is nonconvex with multiple local optima, the Modified Stochastic Probing Method is suggested to efficiently search the feasible region. The method consists of two phase: i) a global search phase(the stochastic probing method) and ii) a local search phase(the nearest neighbor method). While the global search sequentially improves a local minimum, the local search escapes out of a local minimum trapped in the global search phase and also refines a final solution. In order to test the method, a standard test problem from the literature is considered for the optimal design of the paralled expansion of an existing network. The optimal solutions thus found have significantly smaller costs than the ones reported previously by other researchers.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.180-180
• /
• 2011

도시지역에서 빗물은 대부분 도로를 통해 이동하고 배수된다. 도로의 배수시설은 도로면의 안전을 확보하기 위한 목적뿐만 아니라 도로 이외의 지역에 흐르는 유출수의 배수를 위한 기능도 포함하고 있다. 그러나 도로변에 설치되어 있는 빗물받이 등과 같은 하수도 시설을 통해 빗물이 원활하게 배수되지 않으면 노면수가 정체되고, 이 노면수가 인근 주택가로 유입되어 침수를 피해를 가중시키는 경우도 있다. 빗물받이 설계 시 설계빈도를 차집능력에 상위하는 충분한 여유를 두고 설치하더라도 빗물받이가 도시지역에서 발생하는 유송토사, 쓰레기, 낙엽 및 담배꽁초 등에 의하여 막히게 되면 유입구의 순 면적이 감소하게 되어 빗물받이가 제 기능을 다하지 못하는 경우 또한 발생하고 있다. 이렇게 빗물받이로 유입되는 부유잡물들은 퇴적되어, 우수관로 내에서 썩어 수질을 악화시키거나 악취의 원인이 되기도 한다. 본 연구에서는 빗물받이의 이 같은 문제점을 개선할 수 있는 비노출 배수로의 배수효율을 수리실험을 통해 검토하였다. 도로의 측면에 비노출 배수로를 설치하였을 경우 도로위에 수심이 거의 발생하지 않으면서 배출할 수 있는 최대 유량은 1.67 l/s였고, 서울시를 기준으로 설계빈도 10년에 대하여 본 연구의 실험도로 규격에서의 유출량이 1.09 l/s임을 고려할 때 10년 빈도 강우강도 발생 시 비노출 배수로가 충분한 여유를 가지고 배수 시킬 수 있을 것으로 판단된다. 본 실험도로의 규격에서 1.67 l/s의 유출량이 발생하기 위한 강우강도는 서울시를 기준으로 100년 빈도에 상응하는 강우강도로 비노출 배수로에 막힘이 없는 경우 100년 빈도의 강우시에도 노면수 배출이 가능하였다. 쓰레기와 모래와 같은 부유잡물이 배수로를 막고 있다 하더라고 배수효율 저하는 크게 발생하지 않았다. 그러나 흙탕물이 유입되는 경우 흙탕물이 배수로의 공극을 차단하는 현상이 나타났고 이는 도로위의 수심은 증가시켰다. 흙탕물이 유입된 후 배출가능 유량을 강우강도와 빈도를 환산한 결과 서울시를 기준으로 6.8년에 상응하였다. 따라서 흙탕물 유입가능성이 높은 도로에 비노출 배수로를 설치하게 되는 경우 배수로의 효율이 낮아지는 것에 대한 대책이 필요하고, 철저한 관리가 요구된다. 이러한 문제점을 해결하기 위해 비노출 배수로의 채움재를 개선하고 동일실험 수행을 계획 중이며, 비점오염물의 제거효율 또한 검토할 예정이다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.4
• /
• pp.1-8
• /
• 2005

An experimental investigation of a microthruster that uses hydrogen peroxide as a monopropellant is described. The study comprises of preparation method of silver as a catalyst and performance evaluation of a mesoscale reactor. Reduction of silver in $H_2\;at\;500^{\circ}C$ resulted in the best reactivity of all the treatment method tested. A mesoscale reactor was built to find the optimum configuration for full decomposition of propellant. The catalyst bed was made of a glass wafer substrate sputtered with silver and had a length of 20 mm. We measured the conversion rate with varying feed rate of $H_2O_2$ and preheating temperature. With the feed rate of $H_2O_2$, the space time within the reactor varies as well. For the bed length of 20 mm, space time more than 480 s was required for full conversion.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.265-270
• /
• 2018

In this study, the flow analysis due to the car body configuration of air breather was carried out. As the resistance force whose flow affects car body has been studied, it is published that the electricity can be decreased. When the inner pressure of air breather is evaluated, there is the study of efficiency in order to raise the flow rate of inner body. At a total of five models, it is shown that the air resistance and pressure happen differently and the air pressure of side flow is changed. This study result was analyzed by using the analysis program of ANSYS, a study model was modelled using the CATIA V5 modelling program. It was investigated that the air flow rate was distributed uniformly as the curved surface of air breather configuration increases. It is thought as the most effective design method to design the air breather by considering the effect on the air resistance and flow. Also, through the design of the vehicle's airbrid configuration, the design of the product can incorporate a aesthetic sense into the design.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.382-388
• /
• 2000

Hydrogenated amorphous carbon (a-C:H) films were fabricated by electron cyclotron resonance plasma-enhanced chemical vapor deposition. The bonding structure of carbon and hydrogen in the a-C:H films has been investigated by varying the deposition conditions such as ECR power, gas composition of methane and hydrogen, deposition time, and negative DC self bias voltage. The bonding characteristics of the a-C:H thin film were analyzed using FTIR spectroscopy. The IR absorption peaks of the film were observed in the range of $2800\sim3000 \textrm{cm}^{-1}$. The atomic bonding structure of a-C:H film consisted of $sp^3$ and $sp^2$ bonding, most of which is composed of $sp^3$ bonding. The structure of the a-C:H films changed from $CH_3$ bonding to $CH_2$ or CH bonding as deposition time increased. We also found that the amount of dehydrogenation in a-C:H films was increased as the bias voltage increased.

• Water for future
• /
• v.24 no.2
• /
• pp.71-79
• /
• 1991

Some selected hydraulic characteristics including the average velocitv, geometry of the channel cross-section, and water temperature, and sediment-characteristics including suspended sediment concentration , and the size distributions of suspended and bed-sediments were collected at two measuring stations in the Cheongmi-Stream during a flood period. The river bed investigated for this study is composed completely of sands, and it can be considered a typical alluvial channel. The major results obtained from the analysis of the date collected are as follows: 1) Only during floods, a substantial sediment transport occurs in the river; 2) The stage-discharge relations are changed frequently, especially for low flows; 3) The friction in the flow increases with an increase in the flow discharge; 4) Slits and clays are dominant in suspended sediments during normal flows, while sands are dominant during floods; 5) The vertical distributions of the flow velocity and suspended sediment concentration can be described, respectively, by Prandt1-von Karman's log-law and Rouse's exponential law. It is judged that the above results are commonly adapted for other alluvial rivers, although they were obtained from a limited number of data collected from a specific river reach.

• Membrane Journal
• /
• v.22 no.6
• /
• pp.470-480
• /
• 2012

In this study, for a linear tubular membrane with constant diameter the mass balance considering permeate velocity of the each unit length was established. On this basis, mathematical modelling of flows in a pipe was solved using nonlinear second order differential equations as well as steady-state equation. Since this equation is nonlinear, Gauss-Seidel method or another iteration method were used to solve the differential equations. Simulation algorithm for numerical solutions was presented. Also since the permeate flow is varied as operating condition, the solution of equations at each conditions using numerical integrations such as Simpson's rules was used. In order to analyze and compare simulation results, we have performed experiments using a hollow fiber membrane with almost identical tubular membrane. Comparison of theoretical and experimental results, pressure drop, flow rate, and permeate flow in a hollow fiber membrane, were illustrated.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.224-231
• /
• 2001

Hydrogenated amorphous carbon films were deposited by ERC-PECVD with deposition conditions, such as ECR power, gas composition of methane and hydrogen, deposition time, and substrate bias voltage. The characteristics of the film were analyzed using the AES, ERDA, FTIR. Raman spectroscopy and micro hardness tester. From the results of AES and ERDA, the elements in the deposited film were confirmed as carbon and hydrogen atoms. FTIR spectroscopy analysis shows that the atomic bonding structure of a-C:H film consisted of sp³and sp²bonding, most of which is composed of sp³bonding. The structure of the a-C:H films changed from CH₃bonding to CH₂or CH bonding as deposition time increased. We also found that the amount of dehydrogenation in a-C:H films was increased as the bias voltage increased. Raman scattering analysis shows that integrated intensity ratio (I/sub D//I/sub G/) of the D and G peak was increased as the substrate bias voltage increased, and films hardness was increased.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.5 s.347
• /
• pp.11-16
• /
• 2006

This paper reports the correlation between dielectric constant and degree of amorphism of the hybrid type SiOC thin films. SiOC thin films were deposited by high density plasma chemical vapor deposition using bistrimethyl- silylmethane(BTMSM,$H_{9}C_{3}-Si-CH_{2}-Si-C_{3}H_{9}$) and oxygen precursors with various flow rate ratio. As-deposited film and annealed films at $400^{\circ}C$ were analyzed by XRD. The SiOC thin films were amorphous from XRD patterns. For quantitative analysis, the diffraction pattern of the samples was transformed to radial distribution function by Fourier analysis, and then compared with each other. The degree of amorphism of annealed films was higher than that of as-deposited ones. The dielectric constant varied in accordance with flow rate ratio of precursors. The lowest dielectric constant was obtained from the as-deposited film which has the highest degree of amorphism after annealing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1080-1085
• /
• 2012

In this paper a sharp-edged type damping orifice for an aircraft door damper were designed, where the dynamic viscosity of working fluid were assumed to change up to 400cSt. The discharge coefficient of the damping orifice were investigated by CFD analyses and experiments. In particular, the influences of orifice diameter, edge angle, flow direction and the Reynolds number were taken into consideration. Based on this, it has been deduced how high Coulomb friction forces of damper seals is to be allowed to meet the performance criterion with respect to the orifice size.