• Geophysics and Geophysical Exploration
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2020

The acquisition and processing of long-offset data are essential for imaging deep geological structures in marine seismic surveys. It is challenging to derive an accurate subsurface image by employing conventional data processing to long-offset data owing to the normal moveout (NMO) stretch and non-hyperbolic moveout phenomena induced by seismic anisotropy. In 2017, the Korea Institute of Geoscience and Mineral Resources conducted a simultaneous two-dimensional multichannel streamer and ocean-bottom seismic survey using a 5.7-km streamer and an ocean-bottom seismometer to identify the deep geological structure of the Ulleung Basin. Herein, the actual geological subsurface structure was obtained via the sequential iterative updating of the velocity and anisotropic parameters of the long-offset data obtained using a multichannel streamer, and anisotropic prestack Kirchhoff migration was performed using the updated velocity and anisotropic parameters as input parameters. As a result, the reflection energy in the long-offset traces, which showed non-hyperbolic moveout owing to seismic anisotropy, was well aligned horizontally and NMO stretches were also reduced. Thus, a more precise and accurate migrated image was obtained, minimizing the distortion of reflectors and mispositioned reflection energy.

• The Journal of Engineering Geology
• /
• v.26 no.4
• /
• pp.485-495
• /
• 2016

To reinforce and improve the soft ground under a breakwater while using materials efficiently, the replacement ratio and leaving periods of surcharge load are optimized probabilistically. The results of Bayesian updating of the random variables using prior information decrease uncertainty by up to 39.8%, and using prior information with more samples results in a sharp decrease in uncertainty. Replacement ratios of 15%-40% are analyzed using First Order Reliability Method and Monte Carlo simulation to optimize the replacement ratio. The results show that replacement ratios of 20% and 25% are acceptable at the column jet grouting area and the granular compaction pile area, respectively. Life cycle costs are also compared to optimize the replacement ratios within allowable ranges. The results show that a range of 20%-30% is the most economical during the total life cycle. This means that initial construction cost, maintenance cost and failure loss cost are minimized during total life cycle. Probabilistic analysis for leaving periods of shows that three months acceptable. Design optimization with respect to life cycle cost is important to minimize maintenance costs and retain the performance of the structures for the required period. Therefore, more case studies that consider the maintenance costs of soil structures are necessary to establish relevant design codes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1774-1778
• /
• 2008

유량 환산에 이용되는 수위-유량 관계곡선식은 하천의 흐름을 정상 등류상태로 가정하고 유속계를 하천에 투입하여 년간 정해진 횟수의 유량측정을 실시하여 이로부터 갱신하여 작성하고 있다. 평수기에는 이렇게 기기를 이용하여 유량측정이 가능하지만 홍수기나 갈수기에는 접촉식 유속계를 이용한 하천유량 측정이 불가능한 실정이다. 홍수기에는 기기 손상과 관측자의 안전이 위협받는 실정이고, 갈수기에는 유속이 너무 느려서 (0.1 m/s 이하) 프로펠러 유속계의 경우 유속의 정확한 관측이 힘들다. 또한 전지구적 빈번한 이상기후의 현실정에서 가장 중요한 기초 수문자료인 홍수량의 정확한 측정 자료는 많지 않다. 홍수유량을 측정하기 위해서 현재에도 기존의 봉부자를 이용하거나 유비쿼터스 센서를 장착한 봉부자를 이용하는 유량측정 기법이 향해지고 계속적으로 소개되고 있는 실정이지만 봉부자의 특성상 정확한 유량을 계산하기에는 어려움이 많다. 현재 선진국에서는 흐름과 비접촉식 방법을 이용한 하천유량측정 방법이 지난 10 여년간 꾸준이 연구되어 왔다. 그중 대표전인 것이 전자파를 이용한 방법과 영상해석에 의한 방법이다. 전자의 경우 국내에서는 수자원공사에서 10년 이상 연구 개발하여 상품화 시킨바 현업에서 이를 이용하여 홍수유량측정을 실시하고 있다. 후자의 방법은 유체역학 분야에서 흐름해석에 주로 이용되어지던 PIV(particle image velocimetry) 기법을 하천과 같이 대규모의 흐름영역에 적용가능하도록 개발된 기술로 LSPIV (large-casle particle image velocimetry)라 불리우는 기술이다. 본 연구에서는 미국 Iowa 대학에서 개발한 LSPIV를 이용하여 홍수파의 진행시 수위와 유량의 두 변수 사이에 나타나는 Loop rating curve의 이론적인 관계를 하천현장에서 일정시간 간격으로 실측을 통하여 파악하고자 하였다. 현장실험을 위한 대상지점으로 미국 Iowa주 Coralville 시내 Clear Creek의 USGS (US Geologival Survey) 수위관측소 지점을 선택하여 본 연구에서 실시한 유량측정 결과의 비교가 가능토록 하였다. LSPIV는 그 특성상 야간에는 적용하는데 어려움이 있어 아침시간부터 해가 지기 직전까지의 자연채광 조건의 영상취득이 가능한 시간대에서 표면유속을 측정하였고 이에 수심평균유속환산계수를 적용하여 유량을 계산하였다. 강우의 발생으로 인한 홍수파의 진행시 총 43회의 유량을 측정하였는바 이를 이용하여 이 지점의 수위-유량 관계식과 비교한 결과 거의 일치하는 결과를 나타냈다. 특히 홍수파의 진행시 고수위 영역에서의 측정한 결과는 수위의 상승기에는 최고로 7.5% 까지 측정유량이 수위-유량관계식에서 계산한 유량보다 컸으며, 수위의 하강기에는 반대로 최고 5.4% 정도까지 측정유량이 수위-유량관계식에서 계산한 유량보다 작게 나타났다. 또한 최대유량의 발생시기는 최고수위 발생직전의 수위라는 것이 파악되었다. 이러한 경향은 수위-유량 관계곡선의 이론과 잘 일치하는 것이다.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.676-693
• /
• 2016

Although the methodology and models to assess the economic value of technology assets such as patents are being presented in various ways, there does not exist a structured assessment model which enables to objectively assess a database property's value, and thus there is a need to enhance the application feasibility of practical purposes such as licensing of DB assets, commercialization transfer, security, etc., through the establishment of the valuation model and the life-cycle decision logic. In this study, during the valuation process of DB assets, the size of customer demand group expected and the amount of demand, the size and importance of data sets, the approximate degree of database' contribution to the sales performance of a company, the life-cycle of database assets, etc. will be analyzed whether they are appropriate as input variables or not. As for most of DB assets, due to irregular updates there are hardly cases their life-cycle expires, and thus software package's persisting period, ie. 5 years, is often considered the standard. We herein propose the life-cycle estimation logic and valuation models of DB assets based on the concept of half life for DB usage frequency under the condition that DB assets' value decays and there occurs no data update over time.

• Journal of Korea Water Resources Association
• /
• v.31 no.1
• /
• pp.3-12
• /
• 1998

Rainfall intensity under storms affects peak discharge or its time of occurrence in watershed runoff. Thus, it is reasonable to reflect the effect on the parameters of rainfall-runoff models or the governing equations of the models. This paper relates the change of the runoff coefficient of the first tank in tank model to rainfall intensity under storms. The standard four tanks have made the basic structure of the flood event model. and its modifications are as follows: it has two equal runoff coefficients in the first tank: the runoffs from first and second tanks produce delayed response through a simple delaying parameter. Applying the event simulation model to flood data from Naerinchon. runoff coefficients were estimated and their relation to rainfall intensity was analyzed. The results showed the Weak relation of the two factors. The trend of the two was fitted with the equation a1=kI$. where a1is the runoff coefficient of the first tank: I is rainfall intensity; k and m are fitting coefficients. In the verification. the model used moving averages for the calculation of I(t). If the value I(t) gave more greater value of a1(t) than that of previous time(t-1). the flood simulation was performed again from the beginning with the updated greater value of a1. The reflection of rainfall intensity on the runoff coefficient showed far better results than that of a fixed parameter.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.1
• /
• pp.9-16
• /
• 2014

Using a level set method and topological derivatives, a topological shape optimization method that is independent of an initial design is developed for linearly elastic structures. In the level set method, the initial domain is kept fixed and its boundary is represented by an implicit moving boundary embedded in the level set function, which facilitates to handle complicated topological shape changes. The "Hamilton-Jacobi(H-J)" equation and computationally robust numerical technique of "up-wind scheme" lead the initial implicit boundary to an optimal one according to the normal velocity field while minimizing the objective function of compliance and satisfying the constraint of allowable volume. Based on the asymptotic regularization concept, the topological derivative is considered as the limit of shape derivative as the radius of hole approaches to zero. The required velocity field to update the H-J equation is determined from the descent direction of Lagrangian derived from optimality conditions. It turns out that the initial holes are not required to get the optimal result since the developed method can create holes whenever and wherever necessary using indicators obtained from the topological derivatives. It is demonstrated that the proper choice of control parameters for nucleation is crucial for efficient optimization process.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.258-258
• /
• 2019

계산 격자에 기반하여 천수 흐름을 모의할 때, 그 격자에 담긴 물의 양을 정확하게 파악할 필요가 있다. 예를 들어, 초기조건으로 수위가 부여된다면 계산격자의 기하 특성에 맞추어 흐름 변수인 수심이나 흐름 단면적으로 바꾸어야하기 때문이다. 필요에 따라서는 모의 결과를 수위로 보이거나 격자 속 수심을 계산에 사용할 수도 있으므로 그 역변환도 고려되어야 한다. 2차원의 삼각형 계산격자에 대해서는 물의 부피와 수위 관계(volume/free-surface relationship)가 이미 정확(exact)하게 구명되어 있다(Hwang, 2017, J. KWRA). 그런데 1차원 문제의 횡단면에서 흐름 단면적과 수위의 관계(area/free-surface relationship)는 수위로부터 면적 환산에 대해서는 정확하나 그 역변환은 그렇지 않다. 매 시간 단계에서 갱신된 흐름 단면적으로부터 수위를 환산하기 위해 미리 작성된 면적-수위 자료를 이용한 선형 보간이 적용된다(Goodell, 2011, The RAS Solution). 이때, 환산 정확도는 자료의 해상도에 의존된다. 다행히 하천 횡단면 대부분을 채워 흐르는 홍수모의에서는 이 문제가 그리 심각하지는 않다. 심지어 수위가 복단면 저수로 턱에 걸쳐있어 흐름단면적이 급변하는 경우에도 환산 수위의 정확도는 크게 훼손되지 않는다. 그러나 미미한 환산 오차일지라도 그로 인해 수위가 저수로 턱을 넘거나 그보다 작을 수 있다. 이 경우, 홍수터의 잠김여부에 따라 수면폭(top width)이 실제 계산 결과에 비해 크게 달라질 수밖에 없다. 수면폭 오차는 그것을 이용하여 결정되는 수리 수심(hydraulic depth)이나 평균 하상고(mean bed level)의 산정에도 전파된다. 이 연구에서는 하천 횡단면에서 수위와 흐름 단면적 사이의 환산 정확도를 크게 높일 수 있는 기법을 제시하였다. 먼저 하천 횡단면에서 주어진 수위에 대해 흐름 단면적을 산정할 수 있는 알고리듬을 보였다. 또한, 횡단면에서 수위와 흐름 단면적의 관계가 단조 증가 함수(monotonically increasing function)임에 착안하여 그 역변환에 대해 해 찾기(root finding) 방법의 하나인 Brent 기법을 적용하였다. 이 기법은 주어진 구간에서 도함수가 알려져 있지 않은 경우에 대해서도 효과적으로 해를 찾을 수 있는 것으로 알려져 있다(Press et al., 2002, Numerical Recipes in C, 2nd Ed.). 내성천 하류 수계의 333개 단면에서 수면폭에 대한 상대 오차를 살펴보면, 선형 보간에 의한 기존 방법으로는 면적-수위 자료의 수가 1,000개가 되어도 그 최대치가 1% 이내에 들지 않은 반면, 이 연구에서 제시한 기법으로 면적-수위 자료 없이도 1% 이내로 줄어드는 것을 확인하였다. 다만, 반복 계산에 의한 계산 시간의 증대를 피할 수 없다. 미리 작성된 면적-수위 자료를 이용하면 계산 비용을 줄일 수 있으며, 약 35개의 구간으로 나누었을 때 비용 대비오차가 적절하였다. 이 연구는 한국건설기술연구원(주요사업 과제번호: 20190116-001)의 지원에 의한 것이다.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.291-304
• /
• 2021

Updating a forest type map is essential for sustainable forest resource management and monitoring to cope with climate change and various environmental problems. According to the necessity of efficient and wide-area forestry remote sensing, CAS500-4 (Compact Advanced Satellite 500-4; The agriculture and forestry satellite) project has been confirmed and scheduled for launch in 2023. Before launching and utilizing CAS500-4, this study aimed to pre-evaluation the possibility of satellite-based tree species classification using RapidEye, which has similar specifications to the CAS500-4. In this study, the study area was the Chuncheon forest management complex, Gangwon-do. The spectral information was extracted from the growing season image. And the GLCM texture information was derived from the growing and non-growing seasons NIR bands. Both information were used to classification with random forest machine learning method. In this study, tree species were classified into nine classes to the coniferous tree (Korean red pine, Korean pine, Japanese larch), broad-leaved trees (Mongolian oak, Oriental cork oak, East Asian white birch, Korean Castanea, and other broad-leaved trees), and mixed forest. Finally, the classification accuracy was calculated by comparing the forest type map and classification results. As a result, the accuracy was 39.41% when only spectral information was used and 69.29% when both spectral information and texture information was used. For future study, the applicability of the CAS500-4 will be improved by substituting additional variables that more effectively reflect vegetation's ecological characteristics.

• 한국노년학
• /
• v.38 no.3
• /
• pp.593-605
• /
• 2018

This study examines factors that influence older drivers to consider stopping driving in advance and whose advice plays an important role in the driving cessation decision. Data came from a nationally representative cross-sectional survey of community-dwelling older adults (N=2,076). About two thirds reported that they have considered stopping driving (62.8%) and they preferred to decide by themselves (66.0%). Logistic regression results showed that women and residents in urban areas were twice as likely to consider voluntary driving cessation compared to their counterparts. Each one year increase in age contributed to the probability that respondents would consider driving cessation by five percent. Those with greater difficulties in ADLs due to chronic illnesses were also more likely to consider driving cessation. No sociodemographic and health factors were related to whether older drivers preferred to decide by themselves or listen to others. These results imply that policies to promote self-motivation to stop driving among older drivers would be effective. Furthermore, they suggest it could be important to help older drivers plan their driving cessation in advance while still at a young-old age, and that more attention needs to be paid to men and those living in rural areas among older drivers.

• Korean Security Journal
• /
• no.36
• /
• pp.255-292
• /
• 2013

Burglary (also called breaking and entering and sometimes housebreaking) is a crime, the essence of which is illegal entry into a building for the purposes of committing an offence. It is one of the most common types of crime and also a serious issue for every society. A house that is left insecure is an accessible and attractive target for burglars and therefore burglary resistance test & certification system for doors and windows has been developed in many countries. This paper explores several advanced foreign burglary resistance test/certifcation cases (the British SBD, the Dutch KOMO SKH/SKG, the Japanese CP mark, the Australian Standard Certification) for security products and domestic test/certification systems for fire safety products as a comparative study so that any improvement points can be gained for South Korea in the field of security product performance. The comparative analysis results show that South Korea is far behind the security product certification system and needs a lot of improvement in the system by benchmarking foreign cases. The domestic test/certification systems for fire safety products also give some insights for burglary-related security products' performance certification system in Korea. Overall, the need for relevant rules and regulations, the establishment of standards regarding testing and certification, including certified security +hardware product in building security certification system, performance testing as well as production testing (i.e. quality management system evaluation), the basic competency of testers, incentive system for certified/high quality security products were suggested in order to make an optimal model for the security production performance testing and certification system in Korea.