• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.457-476
• /
• 2015

This study is expected to present instructions and analysis of Modern Dancheong pigments by its physical characteristics. Search pigments currently used and experiments proper mixing ratio of Jangdanyuksaek(Incarnadine). Samples are made by based on presented a mixture ratio which is less exfoliation, cracks and color change. And put into accelerated weathering test and ultraviolet ray degradation test. As a result in case of Jidang($TiO_2$) Rutile type is superior in discoloration and durability. Rutile type makes color difference remarkably because of oil absorption difference while mixing with Jangdan. Water paints which are used as a alternative present yellowness which means water paints lack in durability. whiting should be taken carefully as it has high brightness after degradation.

• Applied Biological Chemistry
• /
• v.23 no.3
• /
• pp.173-177
• /
• 1980

The anti-oxidant components in Panax ginseng, which were known to have antiaging effect, were fractionated by various solvents and then isolated by the preparative thin layer chromatography. A developing system with silicagel G using toluene-chloroform-actene (20 : 13 : 13) as mobile phase was applied. The components were investigated the anti-oxidant activity by ${\alpha}$, ${\alpha}'-diphenyl-{\beta}-picrylhydrazyl$ (DPPH) at 517nm. Two effective components were obtained from red ginseng and were indophenol reducing substances.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.1 s.10
• /
• pp.29-34
• /
• 2005

Tungsten oxide($WO_{3}$) is suitable to materials for photochromic window in the visible region. The resistivities of CdS, $WO_{3}$, and $WO_{3}$/CdS films prepared by thermal evaporation method were $4.61\times 10\^{3}$, $7.59\times10^{3}$, and $6.29\times10^{3}$ $\omega$ cm. And x-ray diffraction patterns of CdS, $WO_{3}$/CdS films showed a preferred orientation of hexagonal(002), and the monoclinic(020) structure, respectively. The optical transmission were measured that the cut-on wavelength were 510nm, 380nm for CdS and $WO_{3}$ films respectively, and the transmission spectrum of $WO_{3}$/CdS was shifted into the visible region. Photoluminescence(PL) spectra showed the two peaks at 2.8 eV and 3.2 eV for the as-grown sample($WO_{3}$/CdS ($500{\AA}$), but the other sample($WO_{3}$/CdS ($1000{\AA}$)) had a peak energy value of 2.8 eV. The photochromism of $WO_{3}$/CdS films showed that the excitation of electron-hole pairs and subsequent coloration is shifted into visible-light range. And the spectral behavior of coloration turned out to be proportional to the excited electron-hole pairs creation rate of CdS film. This result is interpreted in terms of charge carrier injection from the CdS-layer into the $WO_{3}$ films. We found a value of about 2.8 eV of $WO_{3}$/CdS film which is somewhat higher than peak energy of 2.54 eV using CBD prepared by Bechinger et. al.

• The korean journal of orthodontics
• /
• v.23 no.3 s.42
• /
• pp.327-340
• /
• 1993

The purpose of this study was to estimate the possibility of practical application of TiN ion-plating method on orthodontic appliances. TiN was coated on the surface of orthodontic stainless steel roll band by means of ion-plating method, and colorimetric properties of its obtained TiN film were investigated by using color analyzer. Also its corrosion and discoloration properties were compared with those of non ion-plated stainless steel roll band by using immersion test, which was done in 1N HCl solution for 10 days. Both weight changes and surface corrosion appearances of specimens for each day were respectively investigated by using electronic weighing machine and SEM(Scanning Electron Microscope). The discoloration degress of TiN-coated specimens immersed in 1N HCl solution were investigated by using color analyzer and then judged by N.B.S.(National Bureau of Standard) Unit. The results of this study were summarized as follows. o TiN ion-plated films showed the hue of 5Y, the value of 7, and the chroma of 3 by Munsell notations. o The weight losses and surface changes of TiN ion-plated specimens immersed in 1N HCl solution were less than those of non ion-plated specimens. It was shown, therefore, that the corrosion resistance was significantly improved by TiN ion-plating. o The discoloration degrees of non ion-plated specimens were too significant to be examined by color analyzer, while those of TiN ion-plated specimens were slight when judged by N.B.S. Unit. It was also apparent, therefore, that the anti-discoloration property was significantly improved by TiN ion-plating.

• Journal of Powder Materials
• /
• v.25 no.1
• /
• pp.7-11
• /
• 2018

In this study, we synthesize tungsten oxide thin films by electrodeposition and characterize their electrochromic properties. Depending on the deposition modes, compact and porous tungsten oxide films are fabricated on a transparent indium tin oxide (ITO) substrate. The morphology and crystal structure of the electrodeposited tungsten oxide thin films are investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). X-ray photoelectron spectroscopy is employed to verify the chemical composition and the oxidation state of the films. Compared to the compact tungsten oxides, the porous films show superior electrochemical activities with higher reversibility during electrochemical reactions. Furthermore, they exhibit very high color contrast (97.0%) and switching speed (3.1 and 3.2 s). The outstanding electrochromic performances of the porous tungsten oxide thin films are mainly attributed to the porous structure, which facilitates ion intercalation/deintercalation during electrochemical reactions.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.182-184
• /
• 1984

In order to develop the storage method of pine agaric by irradiation, pine agarics irradiated with 1,2 and 2.5 kGy were stored in natural low temperature storage room ($15{\pm}2^{\circ}C$, RH: $80{\pm}5%$) and the physicochemical properties were investigated during the 15 days of storage. Veil opening rate of pine agaric was 97% after 7 days storage in control, whereas only 5% in 2-2.5 kGy irradiated groups. Rotting rate after 7 days storage were 28% in control,5-8% in 2-2.5 kGy irradiated groups. In comparison of weight loss, texture and appearance.2-2.5 kGy irradiated groups were better than control. Chemical composition of pine agaric was not remarkably changed by the irradiation and storage period except a slight increase in reducing sugar and a decrease in ascorbic acid by the increase of irradiation dose.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.503-508
• /
• 1991

The salted and dried mullet(Mugil Japonicus) roe had about 42% of protein and 41% of lipid content as major compoments. Therefore the lipid oxidation and the deterioration of protein occurred during drying and storage periods. In order to keep the good quality of the dried roe, acid, peroxide, thiobarbituric acid value and the contitutional amino acid were studied in the different drying air velocities at the conditions of 60% R.H. and $20^{\circ}C$ of drying air temperature. The optimum air velocity showed 2m/sec, which was excellently superior to the lipid and protein quality than those of other air velocities on the dried mullet roe. The drying period shortened from 20 days in the conventional processing method to 7 days in the modified processing method that had 2m/sec of drying air velocity. The drying rate curve had only a falling-rate drying period and not to have a constant-rate drying period.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.793-799
• /
• 2007

Generally, a semiconductor chip measured with a few micro units is captured by line scan camera for higher inspection accuracy. However, the faulty inspection requires an exact boundary detection algorithm, because it is very sensitive to scan speed and lighting conditions. In this paper we propose boundary detection with subpixel edge detection in order to increase the accuracy of bump faulty detection on chips. The bump edge is detected by first derivative to four directions from bump center point and the exact edge positions are searched by the subpixel method. Also, the exact bump boundary to calculate the actual bump size is computed by LSM(Least Squares Method) to minimize errors since the bump size is varied such as bump protrusion, bump bridge, and bump discoloration. Experimental results exhibit that the proposed algorithm shows large improvement comparable to the other conventional boundary detection algorithms.

• Journal of the Korean Electrochemical Society
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2024

With the increasing demand for wearable sensors that are capable of point-of-care testing, paper-based sensors have been extensively studied. Paper is not only extremely cost-effective but also lightweight and flexible, and it is easy to apply conductive materials such as carbon and hydrophobic substances like wax to its surface. Moreover, the capillary action caused by cellulose fibers in paper allows the flow of liquid without help from external forces, making paper a particularly promising platform for wearable electrochemical sensors. Accordingly, paper-based sensors for detecting various analytes through electrochemical methods have been actively developed. Recently, paper-based electrochemical sensors that utilize electrochemiluminescence (ECL) or electrochromic materials for the optical read-out have been reported. This review introduces the basic fabrication methods and various application strategies of paper-based electrochemical sensors.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.170-183
• /
• 2019

Fiber scutching refers to the process of extracting fibers from plants by separating or extracting fibers from the raw materials. As the definition of the term implies, the "Fiber Scutching" is performed on plants with advanced bast fiber as the primary material processing technique performed on plant materials. Some of the most popular phosphorus plants are ramie, hemp, flax, and the paper mulberry, which have a long history of cultivation and a wide range of distribution, making them very universal as a material supporting human life and culture. This study was described in Oju-yeonmunjangjeon-sango but was designed to re-examine the method of breaking dried stalks, which is currently unused in Korea, to examine the feasibility and characteristics of the technology. As a result of sampling and experimenting with hemp bast using the method recorded in the literature, hemp fiber was actually produced. The criteria for removing the shell from the hemp stem were the degree of discoloration and drying, and only when the stalk was completely discolored to yellow could segregation of the stalk from the shell be performed. The amount of sunlight and temperature were conditions that accelerated drying. However, if exposed for a long time, it is confirmed that hemp bast will be in a suitable condition to process, regardless of the amount of sunlight and temperature. 'Breaking of dried stalks', which utilizes the physical power of 'threshing with a flail' is considered a core process of the fiber scutching technique in 'Yukjin' in Hamgyeong-do. The bark and the core of the hemp were separated by tapping, the bast was thinly split, and the shell was peeled off, making it suitable for collecting with thread. The method of collecting the fibers by applying physical power causes downing on the fibers, which is to be generally avoided in the manufacture of bast fabric woven hemp or ramie. However, Hamgyeong-do's fiber scutching method seems to have applied this principle to the method of making fragile fabrics by using it in reverse. This method is distinct from the steaming or boiling of the stalks' in Andong, Korea, and it is similar to the Western method of spinning fabrics.