• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.147-154
• /
• 2013

To provide a method for optimizing the variation range of the received power is applied to Adaptive Genetic Algorithm in a LED communication environment. By optimizing the power distribution dynamically for mobile or fixed using a genetic algorithm, to eliminate the need for a system design that is customized to be independent of the movement pattern of the user's adaptability, and environmental properties. It is possible to improve easily the convenience of the user. The room power deviation from any location can be reduced by reducing the energy. the simulation results, the proposed method does not exist obstacles in an empty room with power deviation $10.5{\mu}W$ decreased 10 percent to reduce the deviation of the received power is shown that. In comparison with conventional methods, convergence to the optimal value is improved, the genetic algorithm proposed was confirmed to be efficient in terms of energy savings.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.1
• /
• pp.80-88
• /
• 2003

In this paper, the new robust torsional vibration suppression control scheme is proposed for the two mass system. A reduced order state feedback controller where the motor speed and the observed torsional torque are fed back and the PI controller are proposed as the torsional vibration suppression controller. Using the estimated mechanical parameters by off-line RLS(Recursive Least Square) algorithms, the speed controller for torsional vibration suppression is designed and its gains are determined using the Kharitonov robust control theory. The Kharitonov robust control theory can obtain the robust stability with a specified stability margin and a damping limit and the good performance of vibration suppression although if the parameters are varied within some specified limit. The effectiveness and usefulness of the proposed schemes are verified with the simulation and the experimental results on the fully-digitalized 5.5kW two mass system.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.255-262
• /
• 1982

The data of 37 oceanographic stations in the coastal sea of Jeju island are compiled in terms of temperature, salinity, dissolved oxygen, silicate, nitrate and phosphate to analyge the chelnical characteristics in this region. This work was carried out during June, 1951. The concentrations of nutrients in the layer more than 50 m are generally 0.5-3 times larger than the surface layer. Each constituents in this layer are as follows: temperature ranged 11.8 to $15.4^{\circ}C$ and salinity, 33.8 to $34.8\%_{\circ}$; and also dissolved oxygen and slicate are 5.2 to 5.6ml/l and 5.6 to $9.0{\mu}g-at/l$, respectively. And nitrate and phosphate ranged 1.0 to $6.0{\mu}g-at/l$ and 0.1 to $0.5{\mu}g-at/l$, respectively. The coastal sea of Jeju island is divided into two parts in chemical view point : one is the southeastern sea of Jeju island under the influence of the Tsushima Current, md the other is the northeastern sea of Jejo island under the influence of the Yellow Sea Bottom Cold Water and the south coastal water of Korea. The north-western sea of Jeju island had relatively a cold (about $13^{\circ}C$) and low saline water (about $34\%_{\circ}$), and dissolved oxygen was higher than in the neibouring waters. It seems that in the southern area between Moseulpo and Seogwipo of Jeju island, two different Ivater masses are complicately intermixed and a tidal front is formed.

• Journal of the Korean Society of Radiology
• /
• v.11 no.6
• /
• pp.531-538
• /
• 2017

Agricultural products produced in the agricultural area around the nuclear power plant are radioactive contamination, which can cause radioactive contamination to the human body. The purpose of this study was to investigate the limit of the radioactivity concentration $^{90}Sr$ for the internal exposure dose evaluation by ingesting the agricultural products collected around the nuclear power plant. The results of the gamma-isotope element analysis were freshly <0.0166-0.0336 Bq / kg for all samples and for artificial radionuclides not detected, and fresh <0.00586-0.0421 Bq / kg for Chinese cabbage, The freshness was 0.106 Bq / kg, and the freshness was 0.0114-0.0901 Bq / kg. 0.0177%, 0.0222%, 0.0376% and 0.00243%, respectively, for Chinese cabbages and large roots, which is lower than the legal standard value of $1mSv/yr{\cdot}man%$. It is considered that the formulas need to be broadly evaluated for the foods consumed by children and adults, taking into consideration the age of the food and the diet

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.64-74
• /
• 1997

The necessity and importance of fatigue failure to variable load has been appreciated as the structural design technique develops and use of high tensile steel is increasing. This is much more appreciated for a large ship such as VLCC. The rigorous fatigue analysis and safety assessment should be, hence, carried out at the design stage to avoid the possibility of fatigue failure and to achieve the design result having a sufficient structural safety to fatigue strength. This paper deals with an efficient spectral fatigue analysis of ship structures by introducing the concept of stress influence coefficient. In the process included are probabilistic loading analysis, evaluation of long-term distribution of stress range and estimation of fatigue life applying the spectral fatigue analysis. An integrated computer program has been developed in which reliability analysis to fatigue strength is also included and has been applied to D/H VLCC.

• Journal of Energy Engineering
• /
• v.19 no.1
• /
• pp.25-31
• /
• 2010

In this experimental research, it was studied to compare with pure gasoline and the fuels of RM50 (reformulated methanol fuel) for performance and exhaust emissions without reconstruction of engine systems. RM50 has a wider range of combustion limitation, which is one of the methanol's characteristics. This causes a stable driving state of RM50 in the experimental condition of unstable state and a low cycle by cycle variation which is used to determine the driving state. It is determined that fuel stability is better because cycle by cycle variation varies within 10%, therefore, driving characteristics is relatively good. In all conditions, RM50 has lower exhaust emissions of CO, HC, NOx than gasoline fuel, however, RM50's noise characteristics are 0.5~2dB higher at all condition, and in the result of the experiments of rubber fusion, it increases the utility possibility of RM50.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.69-69
• /
• 2010

최근 컨테이너 선박의 초대형화로 극후물 고장력 강재인 항복응력 460MPa급 고장력강인 EH47이 개발되었다. 두께 80mm의 극후물 용접에서 용접생산성 향상을 위하여 EGW/FCAW로 양면 용접이 검토되고, 입열량은 최대 300kJ/cm의 대입열 용접이 요구된다. 이를 위해서는 강재 및 용접재료 모두 300kJ/cm 용접부 성능이 선급 규격을 만족하여야 함은 물론 마지막 조립단계에서 적용되기 때문에 용접재료의 용접작업성도 매우 크게 요구되고 있다. 먼저 대입열 용접금속에서 요구되는 저온 충격인성($vE_{-20^{\circ}C}{\geq}57J$)을 만족하기 위하여는 용접금속의 미세조직 제어가 필요하며, 특히 조대한 입계페라이트 생성을 억제하고 미세한 입내 페라이트를 균일 분포하는 것이 중요하지만, 이를 위해 용접금속의 소입성이 지나치게 높이면 경화조직인 베이나이트 분율이 증가하여 오히려 용접금속 저온 충격인성을 저하시키므로, 적절한 용접금속의 성분 제어가 중요하다. 한편 용접부는 선급에서 요구하는 최소 강도인 570MPa를 만족하기 위하여 용접금속의 소성구속 현상을 활용하여 용접부 인장강도를 확보 할 수 있음을 확인했다. 이를 위해서는 용접금속의 적정한 경화도 확보가 필요하였다. 전술한 바와 같이 대입열 용접금속 저온 충격인성 확보와 용접부 강도 측면을 고려하여 용접금속 최적의 탄소당량 범위를 제시코자 하였다. 한편 용접재료의 용접작업성은 EGW용접의 용적이행 현상은 자유비행이행으로 이루어지고 있으며 특성상 용접중 용적과 용융지 사이에 많은 순간단락 현상을 동반하고 있으며, 슬래그 유동이 불안정하면 아크 꺼짐 현상도 관찰되고 있다. 따라서, 현장용접시 원할한 용접작업성을 확보할 수 있는 평가 기준으로써 아크 전류 및 전압의 변동 정도를 설정하고, 용접재료의 용접작업성 확보 기준을 제시코자 하였다.

• The Korean Journal of Applied Statistics
• /
• v.23 no.5
• /
• pp.783-797
• /
• 2010

Based on the importance of asset allocation in the return of an investment portfolio, this article attempts to verify the appropriateness of mutual funds as means of investment to obtain optimal asset allocation. The return-based style analysis is applied to determine a mutual fund's allocation(or a style) among a set of specified asset classes. Assuming a particular investor who defines a range allowed a fund's style to differ from its original one, it is examined whether or not the fund style is continued over an investment time horizon. After verifying the fact that the original style of the investment fails to remain unchanged from the empirical analysis limited to domestic equity mutual funds, we further investigated the reasons for the style drift. Despite several limitations of the analysis, it yields the conclusion that domestic equity mutual funds do not seem to be an appropriate investment tool to achieve a target asset allocation.

• KDI Journal of Economic Policy
• /
• v.33 no.2
• /
• pp.41-79
• /
• 2011

This study examines the compensation scheme for the executives and risk-taking behavior in the Korean banks. Theoretically, shareholders prefer risky asset choice to the optimal one due to the limited liability feature of reward, and stock-based executive compensation may induce choices favorable to the shareholder. We empirically test this risk-taking hypothesis using Korean banks' data. Since only the stock option data is available under the current disclosure system, we limit our analysis to examine the relationship between the compensation through stock option and the risk of banks. The result provides no evidence that stock option compensations increase the risk of banks, which is contrary to the theoretical prediction and preceding studies in the US. This may be due to any factor that the executive reward data omit, or regulation effects on the bank management.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.69-76
• /
• 2004

In this paper, a VCDRO (Voltage Control Dielectric Resonator Oscillator) with low phase noise for X-band application has been designed and fabricated. A low noise and low flicker noise MESFET and a high Q dielectric resonator were selected to obtain good phase noise Performance. Also, a varactor diode having high Q, qualify factor was used to reduce the loading effects and a big Gamma of diode was chosen for linearity of frequency over voltage tuning range. The fabricated circuits was simulated with circuit design tools, ADS to provide the optimum performances. As the measured results of fabricated oscillator, the output power was 5.8 ㏈m at center frequency 12.05㎓ and harmonic suppression -30㏈c, phase noise -114 ㏈c at 100 KHz offset frequency, respectively, and the frequency tuning range as the function of valtage applied to varactor diode was 15.2 MHz and its power variation with frequency was 0.2 ㏈. This oscillator could be available to a local oscillator in X-band.