• Journal of the Korean earth science society
• /
• v.37 no.7
• /
• pp.434-447
• /
• 2016

This study analyzed mass concentrations of PM10 and PM2.5, as measured at Tae-ahn and Gang-nae, Cheongju in central Korea over the period from 2011 to 2015. Higher mass concentrations of PM10, with the exception of dustfall cases during the period of winter and spring, reflected the influence of a prevailing westerly airflow, while the level of PM10 stayed at a low level in summer, reflecting the influence of North Pacific air mass and frequent rainfall. Accordingly, cases where a daily PM10 average of $81{\mu}gm^{-3}$ or over (exceeding the status of fine dust particles being 'a little bit bad') were often observed during the period of winter and spring, with more cases occurring in parts of Tae-ahn that are located close to the sources of pollutant emission in eastern China. Dustfall usually originated from dust storms made up of particles $2.5{\mu}m$ or over in diameter. However, anthropogenic haze displayed a high composition ratio of particulate less than $2.5{\mu}m$ in diameter. Accordingly, brightness temperature difference (BTD) values from the Communication, Ocean and Meteorological Satellite (COMS) were $-0.5^{\circ}K$ or over in haze with fine particulate. PM10 mass concentrations and NOAA 19 satellite BTD for haze cases were analyzed. Though PM10 mass concentrations were found to be lower than $200{\mu}g\;m^{-3}$, the mass concentration ratio of PM2.5/PM10 was measured as higher than 0.4 and BTD was found to be distributed in the range from -0.3 to $0.5^{\circ}K$. However, the BTD of dustfall cases exceeding $190{\mu}g\;m^{-3}$, were found to be less than 0.4 and BTD was found to be distributed in the range less than $-0.7^{\circ}K$. The result of applying BTD threshold values of the large-scale transport of haze proved to fall into line with the range over which aerosols of MODIS AOD and OMI AI were distributed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.6008-6014
• /
• 2013

This study aimed to understand seasonal variation of physico-chemical factors and biomass of size-fractionated phytoplankton at Ulsan seaport during the period from February 2007 to November 2009. Water temperature, salinity, dissolved oxygen (DO), pH, chemical oxygen demand (COD) and total suspended solid (TSS) varied in the range of 8.94-$24.26^{\circ}C$, 25.06-34.54 psu, 4.30-10.73 mg/L, 7.97-8.53, 0.66-40.70 mg/L and 57.4-103.3 mg/L, respectively. These factors showed no clear spatial variation unlike spatial pattern of inorganic nutrients and total chlorophyll-a (chl-a) concentration as biomass. Concentration of phosphate, nitrate and silicate ranged from 0.01 to 3.03 ${\mu}M$, 0.05 to 21.62 ${\mu}M$, and 0.01 to 27.82 ${\mu}M$, respectively, with 2 times higher concentration at inner stations than that at outer stations during the study period. Within the range of total chl-a concentration (0.36-7.11 ${\mu}gL^{-1}$), higher concentration (avg. 1.88 ${\mu}gL^{-1}$) of total chl-a were observed at inner stations compared to that (avg. 0.90 ${\mu}gL^{-1}$) at outer stations. Micro-sized phytoplankton dominated total biomass of phytoplankton in spring (34.0-81.2%), summer (35.1-65.6%) and winter (3.9-62.0%). Nano- and pico-sized phytoplankton contributed 58.2-74.5% and 22.4-38.2% to total biomass of phytoplankton in autumn, respectively. However, contribution in biomass of size-fractionated phytoplankton to total phytoplankton biomass showed no clear difference between inner and outer stations. Consequently, these results indicated that spatio-temporal distribution of phytoplankton biomass at Ulsan seaport was dominated by micro-phytoplankton (avg. 52.3%) during the study period except autumn, which was closely dependent on the concentration of inorganic nutrients (p<0.05).

• Journal of Navigation and Port Research
• /
• v.30 no.10 s.116
• /
• pp.839-845
• /
• 2006

A laser docking system provides a centimeter-level accuracy distance from jetty mounted laser sensors in order to help a vessel to approach to a pier. It is very accurate & useful, whereas there are too many considerable problems. Laser sensors of the laser docking system need to be correctly positioned and installed on a jetty to allow for full range of vessels to be berthed and to consider loading condition and tidal variations. Above all, the laser docking system is expensive and its service coverage is limited. In order to solve these problems, CDGPS positioning method using GPS satellites has been proposed. This paper presents that, through RHDOP simulation, the previous CDGPS positioning method using only GPS satellites is not able to provide the continuous service with centimeter-level positioning accuracy. And this paper proposes a pseudolite-augmented positioning method for vessel docking in order to solve the problem of the continuous service on the previous CDGPS positioning method. In this paper, pseudolite is used to aid in CDGPS positioning. This paper shows that the proposed method can provides the continuous service through comparison analysis of RHDOP simulation results between the GPS satellite constellation and the pseudolite-augmented GPS satellite constellation. Furthermore, it is shown that the proposed positioning method satisfies the positioning performance required for vessel automatic docking at a test bed designed for performance evaluation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.263-274
• /
• 2020

In the Southeast Sea of Korea, a cold water mass is formed intensively in summer every year, causing frequent abnormal sea conditions. In order to analyze the spatial changes of sea surface temperature distribution in this area, ocean fields buoy data observed at Gori and Jeongja and reanalyzed sea surface temperature(SST) data from GHRSST Level 4 were used from June to September 2018. The buoy data were used to analyze the time-series water temperature changes at two stations, and the GHRSST data were used to calculate the daily SST variance and weighted mean center(WMC) across the study area. When the buoy's water temperature was lowered, the variance of SST in the study area trend to increase, but it did not appear consistently for the entire period. This is because GHRSST is a reanalysis data that does not reflect sensitive changes in water temperature along the coast. As such, there is a limit to grasping the local small-scale water temperature change in the coast or detecting the location and extent of the cold water zone only by the statistical variance representing the SST change in the entire sea area. Therefore, as a result of using WMC to quantitatively determine the spatial location of the cold water mass, when the cold water zone occurred, WMC was located in the northwest sea area from the mean center(MC) of the study area. This means that it is possible to quantitatively identify where and to what extent the distribution of cold surface water temperature appears through SST's WMC location information, and we could see the possibility of WMC's use in detecting the scale of cold water zones and the extent of regional spread in the future.

• Korean Journal of Ichthyology
• /
• v.13 no.3
• /
• pp.210-219
• /
• 2001

The fisheries resources of the set net fishery on four fishing grounds (Pyuong Dae, Gu Eum, Du Moah, Gang Jeong) in coastal waters of Jeju Island were studied to the determine catch-variation characteristics from January, 1998 to December, 1999. A total catch of 153,862 kg was made through the survey period. The large total was related mainly to the high catch of Trachurus japonicus, which comprised 58.2% of the total. Other dominant species which account for 23.0% of the total catch were Siganus fuscescens, Todarodes pacificus, Loligo chinesis, Seriola lalandi, Sepioteuthis lessoniana, and Seriola quinqueradiata. Catch density was high in Gu Eum (more than 100,000 kg), whereas those in Pyuong Dae, Du Moah, and Gang Jeong were less than 30,000 kg in total. The fishing period of the set net fishery was from April to December, which was also closely related to the variation of the sea water temperature in the fishing grounds. The ranges of water temperature in the four fishing grounds were $18{\sim}26^{\circ}C$ in Pyuong Dae, $16{\sim}26^{\circ}C$ in Du Moah, $15{\sim}26^{\circ}C$ in Gu Eum, and $15{\sim}26^{\circ}C$ in Gang Jeong.

• Korean Journal of Food Science and Technology
• /
• v.47 no.6
• /
• pp.789-792
• /
• 2015

Samples of fishery products were tested for radioactivity by using the intake frequency data from Korea Health Statistics. The radioactivity of $^{40}K$, $^{137}Cs$, $^{134}Cs$, and $^{131}I$ was analyzed using gamma spectrometry with a simplified sample pre-treatment procedure. The radioactivity range for $^{40}K$ was 21.9-3050 Bq/kg, whereas the radioactivities of $^{137}Cs$, $^{134}Cs$, and $^{131}I$ were under minimum detectable activity which were in the range of 0.140-1.97, 0.0900-1.89 and 0.124-1.94 Bq/kg, respectively, for the three species. The results suggest that the Fukushima accident did not have a significant impact on domestic fishery products, which were analyzed during the period from 2013 to 2015. Additionally, there seemed to be no significant impact of additional exposure dose by the analyzed radionuclides.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.14-14
• /
• 2001

현재 제지용 펄프 및 펼프 원료의 국내 자급상태는 매우 낮은 수준이다. 따라서 원료 가격변동과 환율에 따라 수익성은 물론, 원료 수급에도 큰 영향을 받게 된다. 최근 버 진펄프의 가격상승은 재생펄프 사용량과 고지수입량을 더욱 늘리고 있으며, 이들의 사 용에 따른 품질저하 개선노력도 꾸준히 행해지고 있다. 그러나 원가절감과 품질유지라 는 두 마리 토끼를 한꺼번에 잡는 것은 그리 쉬운 일이 아니며 그 효과 또한 점점 미 미해 지고 있는 실정이다. 외국의 경우 이러한 문제점들을 펄프소재면에서 접근하여 해 결하고자 하는 시도가 있었다. 중국은 벗짚펄프를 제지용으로 적용하여 오랜 시행착오 끝에 성공을 거두고 있으며, 남미에서도 수수 등을 이용한 제지용 펼프 개발에 노력과 투자를 아끼지 않고 있다. 이는 제한된 원료의 사용만으로 직면하고 있는 여러 문제점 들을 해결하기가 힘들다는 언식에서 출발한 것이며, 새로운 원료개발 자체가 그 해결방 안으로서 충분한 가치가 있음을 보여준다고 하겠다. 이와 같은 맥락에 따라 국내에서 적용이 가능한 소재를 조사하였으며 우선적으로 신서란을 선택하게 되었다. 신서란은 뉴질랜드가 원산지로 알려져 있으며 오래전부터 제주도에 자생하고 있는 다년생 초본류이다. 수많은 경질섬유(hard fiber)중에서도 경제적으로 재배되는 유일한 작물로 선박용 로프, 그물, 범포 등의 원료로 사용되었으나 현재는 화학섬유로 대체되 어 그 사용이 전무한 실정이다. 선서란은 고강도와 우수한 유연성, 탄력성 및 양호한 광학적 성질을 가지고 있으며 무엇보다 척박한 땅에서도 생장이 왕성하여 재배가 쉽다 는 것이 가장 큰 장점이다. 본 연구는 펄프용 섬유로서 양호한 기본특성을 가진 신서란 을 이용한 펄프를 기존 제지공정에 일정량 투입함으로써 얻고자 하는 종이의 일반물성 개선 및 특수기능 향상에 도움이 되는 제지용 펄프로서의 가능성을 알아보고자 하였다.이어서 몇십%의 현을 억제하지는 못한다는 결론을 도출할 수 있었다. 연구의 결과를 요약하면 다음과 같다. 첫째, 한국과 미국 패션제품의 지난 십년간의 가격 과 품질의 상관관계는 매우 약한 정(+)의 상관을 가지고 있었다. 한국패션제품의 전체 서열상관계수의 평균은 0.091이었고, 미국의 상관계수 평균은 0.192였 다. 상관계수의 수치만으로 볼 때 한국보다는 미국 패션제품의 가격과 품질간의 상관관계가 조금 높게 나타났으나, 양국간 통계적인 차이는 없었다. 또한, 한국 패션제품의 경우에는 제품군의 가격대별 상관관계를 살펴보았는데, 그 결과 1만원 미만의 저가 제품군과 330만원이상의 고가의 제품군의 경우 부(-)의 상관계수를 나타냈다. 둘째. 1990년대 한국과 미국 패션시장의 가격과 품질간의 상관계수의 범위는 제품군별. 산업범주별 로 상이한 분포를 보이고 있었다. 패션제품군별로 보 면, 한국의 경우는 가장 높은 '여행용가방(r = 0.707)' 에서 가장 낮은 '자외선 차단화장품(r = -0.58)'까지, 그리고 미국 패션제품군의 상관계수의 범위는 '팬티 스타킹'의 0.820에서 '남성용 런닝슈즈'의 -0.472까지의 분포를 나타냈다. 마지막으로, 제품의 가격과 품질에 대한 정보를 소비자가 알 경우 얻을 수 있는 소비자의 구매이득 을 추산한 결과 패션제품시장에서 완전한 품질정보를 가지고 있다고 가정한 '현명한 사람'은, 최고가격의 제품만을 구입한다고 가정한 '부유한 사람들'의 구입방식에 비해 최고 좋은 품질의 상품을 총 지불액의 비율로 보아, 한국의 소비자는 약 50% 정도를, 미국의 소비자는 약 91%나 되는 액수를 절약하여 구매할 수 있는 것으로 나타났다. 이상의 본 연구의 결과를 종합하여 볼 때 한국과 미국 모두 제품군별, 그리고 산업범주별로 상관관계가 차이를 보이고 있어, 양국의 소비자들이 패션제품 의 품질을 평가함에 있어 오로지 가격에 대한

• Journal of the Korean Society of Radiology
• /
• v.12 no.5
• /
• pp.651-658
• /
• 2018

A foot pedal switch in the diagnosis x-ray radiography system has been researched to improve radiologic technologist works and patient satisfaction. The switch has been installed in the diagnosis x-ray radiography system used in domestic clinics. Quantitative evaluation has been conducted by measuring the exposure dose reproducibility test, tube voltage, mAs, and percentage average error. Qualitative evaluation has been conducted by analysis of the radiologic technologists questionnaire. In the quantitative evaluation for the use of the foot pedal switch, the coefficient of variation was less than 0.05 in the exposure dose reproducibility test. In the mAs test, percentage average error of ${\pm}20%$ was measured. There was no problem raised since it meets the all inspection standards of the diagnosis x-ray generator. In the qualitative evaluation, most of the opinions are that it has a clinical value for the foot pedal switch in the diagnosis x-ray radiography system. Therefore, developing the foot pedal switch for the diagnosis x-ray radiography system can improve effectively the rapidity and accuracy of the radiologic technologist work. In addition, it is effective in decreasing the x-ray exposure of patients and increasing satisfaction for the medical service due to reduction of retaking x-ray.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.2
• /
• pp.101-108
• /
• 2009

A fretting wear test rig for dry ambient condition, which employs a piezoelectric actuator, has been developed. It is driven and loaded in a very simple manner with acceptable experimental accuracy. By using the rig, Inconel 690 tube has been tested under the normal load of 10 and 15N with sliding amplitude of less than $100{\mu}m$ during $10^6$cycles. The wear resistance of the material has been characterized in terms of the wear coefficient based on the work rate model. SEM micrographs show the complex structures of the scars, which consist of risen peaks, plate-type thin layers and locally exposed bare surfaces. The cracks spread over the layers give clue to the fretting wear mechanism of the material.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.3
• /
• pp.167-173
• /
• 2011

The Effects of external resistance on electrical properties such as current density, power density and coulombic efficiency were investigated in two-chamber type MFCs using a ferricyanide as reducing agent. A stable electricity was produced when a constant time elapsed after innoculation of mixed cultures into the anode compartment; voltages from 0.13 to 0.16 V was measured at $50{\Omega}$ of external resistance. When the external resistance was increased, the current density decreased and the power density rapidly increased and then slowly decreased. Big variation of electrical properties was observed in high-current density region due to the concentration loss related with substrate consumption in repeated experiments changing the external resistance. The maximum power density ($175.8mW/m^2$) and coulombic efficiency (46.1%) were obtained at $100{\Omega}$ of the external resistance which is nearest with the internal resistance ($134{\Omega}$) of MFC system.