• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.28-32
• /
• 2014

For a signal such as speech showing piece-wise linear shape in a very short time period, a nonuniform sampling method based on the inflection point detection (IPD) is proposed to reduce data rate. The method exploits the geometrical characteristics of signal further than the existing local maxima/minima detection (MMD) based sampling method. As results, the reconstructed signal by the interpolation of the IPD based sampled data resembles the original speech more. Computer simulation shows that the proposed IPD based method produces about 9~23 dB improvement over the existing MMD method. To show the usefulness of the IPD technique, it is applied to speech coding, and compared to the continuously variable slope delta modulation (CVSD). The nonuniformly sampled data is binary coded with one bit flag set "1". Noninflection samples are not sent, but only flag bits set 0 are sent. The method shows 0.3 ~ 9 dB SNR and 0.5 ~ 1.3 mean opinion score (MOS) improvements over the CVSD.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.710-715
• /
• 2021

Power line signal can show disturbances due to various causes. Typical anomalies are temporary sag/swell of the amplitude, flat topped signal, and harmonic distortions. The disturbances need to be detected and treated properly for the quality of the power signal. In this study, the power disturbances are detected using the inflection points (IP). The inflection points are defined as points where local maxima/minima or the slope changes occur. The power line signal has a fixed IP pattern since it is basically sinusoidal, and it may have additional inflection points if there is any disturbance. The disturbance is detected by comparing the IP patterns between the normal signal and distorted signal. In addition, by defining a cost function, the time instant where the disturbance happens can be decided. The computer simulation shows that the proposed method is useful for the detection of various disturbances. The simple sag or swell signal only shows the amplitude changes at the detected inflection points. However, the flat top signal and harmonically distorted signal produce additional inflection points and large values in the cost function. These results can be exploited for the further processing of disturbance classification.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.472-476
• /
• 2023

Fundamental frequency/pitch period are major characteristics of speech signals. They are used in many speech applications like speech coding, speech recognition, speaker identification, and so on. In this paper, some of inflection points are used to estimate the pitch which is the inverse of the fundamental frequency. The inflection points are defined as points where local maxima, local minima or the slope changes occur. The speech signal is preprocessed to remove unnecessary inflection points due to the high frequency components using a low pass filter. Only the inflection points from local maxima are used to get the pitch period. While the existing pitch estimation methods process speech signals in blockwise, the proposed method detects the inflection points in sample and produces the pitch period/fundamental frequency estimates along the time. Computer simulation shows the usefulness of the proposed method as a fundamental frequency estimator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.635-638
• /
• 2005

The curve shape of the time fluctuation extracted from the electromagnetic signals is very complex. Thus it is important to decide exactly the signal property such as the inflection point for the observed signal. Usually filters elaborately designed are used to detect the signal characteristics. When the noise is added to the signal, the inflection point can be detected using the observation filter. In this paper we propose the design method for a natural observation filter with optimal filter order to extract a definite inflection point for the case of signals with the mixed noise.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.127-132
• /
• 2005

The curve of motion indicated to waveform of the fast movement of human extracted using virtual reality or the quantity of time fluctuation of the electromagnetic signal as the quantity of electric fluctuation of the atmosphere is complex. It is important to decide exactly the signal property as the inflection point for the observation signal. When the signal is mixed by noise signal, the traditional method is difficult to detect the inflection point. In this paper the noisy signal is eliminated by wavelet thresholding method and the filter using natural observation theorem is applied. It shows that the inflection point of the signal waveform can be detected exactly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2205-2210
• /
• 2009

In this paper, the proposed method is a denoising technology by tangent curve interpolation of zero points. The problem of the hard threshold method is improved by the proposed method. The quantity of time fluctuation of the electromagnetic signal as the quantity of electric fluctuation of the natural world or the curve of motion waveform of the fast movement of human extracted using virtual reality is, in fact, complex. Therefore it is important to decide exactly the signal properties as the inflection point for observation signal. In particular, it is necessary to extract the properties after denoising, since the measurement signal of the natural world include some noises. It shows that the noise of the inflection point signal with noise II, noise factor 5, is eliminated by the proposed method, and the result of SNR for the signal is improved 3.4dB than that by the conventional hard threshold.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1081-1085
• /
• 2020

Instantaneous frequencies (IF) of the AM-FM signal is estimated based on the inflection point detection (IPD) method. Local maxima/minima are detected using the IPD, and they are exploited to find the IF of AM and FM components, respectively. The envelope of the maxima/minima is obtained to estimate the IF of the AM part. And the distance between neighboring maxima (or minima) is used to estimate the IF of the FM component. Computer simulation shows that the proposed method properly estimates the IF of the AM and FM when the signal has fixed frequencies for both parts. In the case of the time-varying IF of the FM part, the estimated IF shows some deviation from the true IF due to the rough sampling effect of the maximum/minimum points. Thus, the post-processing such as the lowpass filtering of the estimated IF is required to refine the resulting IF estimation.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1988_1989
• /
• 2009

본 논문은 이차 미분 맥파(SDPTG, Second Derivation of Photoplethysmogram)를 측정하여 이차 미분 맥파의 5개의 특징점을 검출하는 방법에 대한 내용을 기술한다. 본 논문에서는 측정된 신호의 신호대 잡음비(SNR)을 높이는 방법과 기존의 미분을 이용한 변곡점 추출의 한계적인 부분, 그리고 본 논문에서 제안하는 이차 미분 맥파의 특징점의 분포를 이용한 특징점 추출 알고리즘에 대해서 설명한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.21-22
• /
• 2013

논문에서는 제스처 인식을 하기 위해 필요한 특징 값을 3차원 방향 코드로 구현한 특징 패턴을 검출하는 방법을 제안한다. 검출된 데이터 좌표끼리 직선을 만들고 직선들의 사이각의 합 연산을 이용해서 특징 변곡점을 추출한다. 추출된 변곡점끼리 직선을 생성한 후, 8방향 코드와 깊이 값을 병합시킨 24방향 코드를 맵핑 시켜준다. 맵핑된 방향 코드들을 한 패턴으로 생성한다. 생성된 패턴에서 인식에 불필요한 방향 노이즈를 제거하기 위해 특정 규칙을 적용한 필터링을 적용하여 필터링된 패턴을 추출하게 된다. '배너코드를 이용한 8방향 패턴'과 비교해서 더 효과적인 패턴이 추출됨을 확인하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.152-157
• /
• 2014

Digital still camera generally uses optical low-pass filter(OLPF) to enhance its image quality because it removes high spatial frequencies causing aliasing. However, the use of OLPF causes some loss of detail. On the other hand, when image are captured by using no OLPF, the moir$\acute{e}$ is generally existed in high spatial frequency region of an image. Therefore, in this paper, moir$\acute{e}$ reduction method in case of using no OLPF is suggested. To detect the moir$\acute{e}$, spatial frequency response(SFR) of camera was firstly analyzed by using ISO 12233 resolution chart. Then, moir$\acute{e}$ region is detected by using the patterns that are related to the SFR of camera. next, this region is analysed in the frequency domain. Then, the moir$\acute{e}$ is reduced by removing its frequency component, which represents inflection point between high frequency and DC components. Through the experimental results, it is shown that the proposed method can achieve moir$\acute{e}$ reduction with preserving the detail.