• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.275-285
• /
• 2020

The aims of this study was to examine the effect on the hand disinfection performance, the performance rate, and the satisfaction with the use of the belt-type hand sanitizers in clinical nurses. The study is a one group pre-post test quasi-experimental design. Effectiveness of using the belt-type hand sanitizers was measured with a self-reporting questionnaire. As a result, the performance of hand disinfection and the performance rate were significantly higher after using the belt-type hand sanitizers, and also, the satisfaction with the use of the belt-type hand sanitizers was significantly high. The belt-type hand sanitizer is effective method to improve both hand disinfection performance and its performance rate. Therefore, if the belt-type hand sanitizer is used in clinical practice, it may contribute to the improving the hand disinfection performance and its performance rate.

• Proceedings of the KIPE Conference
• /
• 2004.11a
• /
• pp.5-9
• /
• 2004

본 논문에서는, 벨트 연결형 기동발전기(Integrated Starter Generators)를 이용하여 승용 자동차에서 엔진 기동 시 발생하는 토크 맥동을 억제하는 방법을 제안하였다. 기동발전기의 빠른 토크 응답성을 통하여 내연기관의 기동 시 발생하는 저 주파수의 진동을 억제하여 승용차의 승차감을 개선하고자 한다. 특히 벨트를 통하여 구동되는(또는 구동하는) 벨트 연결형 기동발전기에 있어 벨트의 특성 분석과 모델링을 통하여 효과적인 맥동토크 억제 법을 제시하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.91-95
• /
• 1992

현재 대부분의 공작기계에서는 모터의 동력을 주축으로 전달하기 위해서 커플링, 밸트,기어 등을 사용하고 있지 만 주축이 고속회전할 수록 커플링 구동방법에서는 주축과 모터의 미스얼라인먼트에 의한 진동과 소음이 커지고 벨트 구동방법에서는 원심력에 의한 벨트 장력의 증가 및 벨트의 파손현상, 벨트와 풀리간의 미끄럼현상 등이 발생하며, 기거 구동방법에서는 기어간의 금속접촉에 의한 진동과 소음이 증대하게 된다. 본 연구에서는 모터내장형 주축의 동특성을 체계적으로 해석하기 위해서 유한요소모델을 도입하였다. 특히 공작기계 주축은 세장비가 비교적 작기 때문에 Timoshenko보 이론으로 모델화하였고, 여러장의 얇은 철심용 강판들도 적층된 내장형 모터의 회전부(rotor)는 굽힘변형 및 전단변형에 대해서 상당 수준의 강성효과를 나타내기 때문에 질량효과 외에도 그 강성효과를 수학적 모델에서 고려하였다, 또한 진동실험 결과로 부터 모터회전부의 강성특성을 규명하는 방법을 제시하였으며, 제안된 규명방법의 유용성은 모터내장형 주축에 대한 모드매개변수의 이론값과 실험값을 비교함으로써 입증하였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.04a
• /
• pp.271.2-275
• /
• 2001

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.973-978
• /
• 2007

In this paper, we make a study of a thermal deformation by FEM and test to define the deformation mode of the Vacuum-Cleaner's Nozzle-Cover. In FEM analysis, 3 different conditions were considered separately, such as (1) Compressive force by Belt tension, (2) Friction heat between Belt and Shaft and (3) Compressive force combined with heat. Throughout FEM analysis it was found that the deformation was caused by heat and it was proved through a simulation test with a real product.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.424-432
• /
• 2018

We herein analyze and study the shielding effectiveness characteristic of an open conveyor-belt-type microwave dryer that is widely used in industry. In particular, the electromagnetic wave leakage problem of the open-type conveyor belt dryer using a general-purpose 2.45-GHz magnetron was improved by applying the corrugated rectangular waveguide. We conducted the electromagnetic simulation of the optimal shielding effectiveness characteristic with regard to the proposed waveguide structure to analyze the attenuation characteristics of the corrugated rectangular waveguide. To verify the shielding effectiveness characteristic of the fabricated corrugated rectangular waveguide by IEEE standard 299, we achieved the shielding effectiveness of more than 30 dB in the practical microwave dryer with the proposed corrugated rectangular waveguide.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.822-825
• /
• 2004

Continuously variable transmission (CVT) mechanisms considered here is a V-belt drive with two variable-diameter pulleys and effective diameters. One pulley was set by a mechanical link while the other was spring-loaded to provide automatic correspondence. The center distance between the two variable-diameter pulleys was fixed. Experimental studies were executed to analyze efficiencies as change of its speed ratio.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.205-209
• /
• 1994

본 연구에서는 오디오용 데크의 음질특성과 벨트구동계의 회전진동 특성과의 연관성을 규명하고자 한다. 이를 위해 벨트구동계를 다자유도 진동계로 모델링하여 회전진동 특성을 규명하고 실험으로 확인하였다. 이의 결과를 실제 데크에 응용하기 위해 각 파라미터의 변화에 따른 특성변화의 경향을 살펴보았으며, 당사에서 개발중인 신모델에서 회전비의 적절한 설계를 제안하여 우수한 음질특성을 확인하였다.

• Resources Recycling
• /
• v.24 no.6
• /
• pp.54-60
• /
• 2015

The objective of this study is to develop a belt-type dryer with a capacity of 1 ton/day, thereby improving drying efficiency by more than 70% and reducing the size of dryers by more than 50%, and thus making dryers smaller and lighter to reduce the installation and operation costs by more than 20%. We identified structural improvements by analyzing existing dryers employing indirect heating and verified the superior drying performance of the proposed method through some basic experiments. Furthermore, we verified the improvements in the heat transfer and drying characteristics as we conducted the experiments at reduced pressure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.667-670
• /
• 2007

Wellness monitoring is a growing area that will benefit from the use of wearable computing systems. The purpose of this study is to implement the wearable ECG monitoring system for ubiquitous healthcare. This paper presents a prototype wearable wellness monitoring system capable of measuring, transmitting and analyzing continuous ECG data. The hardware system allows data to be transmitted wirelessly from chest belt type sensors to a server PC using Zigbee. We conducted experiments using the system for ECG monitoring and medical screening tests and present preliminary data and results.