• Nuclear Engineering and Technology
• /
• v.5 no.4
• /
• pp.321-333
• /
• 1973

The rates and activation parameters for the halide exchange reactions of substituted benzenesulfonylbromides (R-C$_{6}$H$_4$SO$_2$Br, R=p-MeO, p-$CH_3$, p-H, p-NO$_2$) in dry acetone at two temperatures were determined. It was found that the nucleophilicity order of Cl->I-$\geq$Br- for strong electron withdrawing-, and mild electron donating group, and of I-$\geq$Cl->Br- for strong electron donating group, Hammett plots showed slightly convoked characteristics which is similar to the plots of substituted benzenesulfonylchlorides, but contrary to the concaved nature for the halide exchange reactions of substituted benzyl chlorides. The rate of halogen exchange between benzenesulfonylbromide and lithium bromide decreased in the order of solvent : ($CH_3$)$_2$CO>$CH_3$CN》MeOH. The rates and activation parameters were also compared with those already known in the substituted benzenesulfonylchlorides. Theses were explained in terms of the structural properties of the transition state, and discussed the reaction mechanisms.s.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.87-90
• /
• 2005

In this study, we have examined the exfoliation behavior of layered clay during in-situ polymeriztion with styrene by using real-time XRD analysis. The 4C1 beam line at the Pohang Accelerator Laboratory (PAL) was used for this study. Different exfoliation behaviors have been shown to depend on the cation exchange capacity (CEC) of clay and the chemical structure of organic modifiers. For 10A-MMT and 15A-MMT having high CEC, no peak shifts were observed on real-time XRD analysis during polymerization. However, 2$\theta$ for 25A-MMT and VDAC-MMT, each having low CEC’s as well as aromatic benzene moieties and vinyl groups, respectively, decreased as polymerization time increased.

• The Korean Journal of Nuclear Medicine
• /
• v.24 no.1
• /
• pp.101-107
• /
• 1990

To develop $^{131}I-labelled$ m-iodobeneylguanidine $(^{131}I-MIBG)$, various experiments such as synthesis of MIBG, establishment of labelling conditions, determination of radiochemical purity, and examination of stability were carried out. 1) m-Iodobenzylguanidine (MIBG) sulfate was synthesized with a total yield of 62.4% by the condensation of m-iodobenzylamine hydrochloride with cyanamide via MIBG bicarbonate. Its physical properties, IR, $^1H-NMR$, and elemental analysis data were nearly identical to those of literature. 2) Freeze-dried or vacuum-dried kit vials were prepared from the mixture so as to contain MIBG (2 mg), ascorbic acid (10 mg), copper (II) sulfate (0.14 mg), and tin (II) sulfate (0.5 mg) per vial. Copper ( I ) catalyzed radioiodination of MIBG was carried out using kit vials and 0.01 M $H_2SO_4$ as solvent at $100^{\circ}C$ for 30 min under nitrogen atmosphere (optimal conditions). Labelling yield was 98% and radiochemical purity was 99.5%, respectively. 3) Solid-phase radioiodination of MIBG was carried out at $155^{\circ}C$ for 30 min using the prepared vials to contain MIBG (2 mg) and ammonium sulfate (10 mg). Duplicate reactions under the same conditions showed labelling yield of 95% and radiochemical purity of 99.5%. 4) $^{131}I-MIBG$ prepared either by catalytic or by solid-phase exchange method showed radio-chemical purity of 99% even after 3 days storing at room temperature.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.277-282
• /
• 2021

Two hydrophobic imidazolium based ionic liquids including 1-benzyl-3-butylimidazolium hexafluorophosphate [BzBIM]PF₆ and 1-pentyl-3-butylimidazolium hexafluorophosphate [PBIM]PF₆ having the same anion and different cation parts were synthesized. The structural composition of these ionic liquids were confirmed with Fourier-transform infrared spectroscopy (FT-IR) and proton nuclear magnetic resonance (¹H-NMR). Their physiochemical properties such as viscosity, ionic conductivity and thermal stability alongside electrochemical potential window range for both ionic liquid electrolytes were characterized and compared to each other. The overall results revealed that [BzBIM]PF₆ has higher thermal and electrochemical stabilities and viscosity than that of [PBIM]PF₆ probably due to the presence of benzyl ring in the imidazolium cation providing strong intermolecular π-π interactions.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.325-332
• /
• 2010

The bactericidal efficacy of three common sanitizers (100 or 200 ppm of sodium hypochlorite, 100 or 200 ppm of n-alkyl($C_{12}-C_{18}$)benzyldimethyl ehloride, and 50 or 100 ppm of peroxyacetie acid) against Escherichia coli ATCC 10536 and Staphylococcus aureus ATCC 6538 was studied using the suspension test method at various exposure temperatures (4~$40^{\circ}C$) and times(1~60min) under both dirty and clean conditions, respectively. During the suspension tests, sodium hypochlorite (200 ppm) showed higher bactericidal activity than the other sanitizers under clean conditions, with 5 log reductions against E. coli as well as S. aureus in the first 1 min of treatments at $4^{\circ}C$, However, the efficacy of sodium hypochlorite decreased markedly under dirty conditions due to its susceptibility to interfering substances. The efficacy of the n-alkyl($C_{12}-C_{18}$)benzyldimethyl chloride increased considerable as the exposure temperature and time increased. The bactericidal efficacy of the n-alkyl($C_{12}-C_{18}$)benzyldimethyl chloride might be less effective on low temperature, however, the longer time the sanitizer is in contact, the more effective the sanitization effect. Treatment with peroxyacetic acid (100 ppm) showed at least 5 log reduction against E. coli and S. aureus for 5 min at $4^{\circ}C$ under both clean and dirty conditions. The efficacy of the peroxyacetic acid was not much altered by interfering substances and aflected by changes in temperature or time.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.178-184
• /
• 2019

Strawberry ($Fragaria{\times}ananassa$) is one of the most important and popular fruit crops in the world, and 'Sulhyang' is one of the principal cultivars cultivated in the Republic of Korea for the domestic market. The growth and flower induction in strawberry is the process which influences directly on fruit bearing and yield of this crop. In this study, effect of benzyladenine (BA), gibberellic acid ($GA_3$), and salicylic acid (SA) on growth and flower bud induction in strawberry 'Sulhyang' was investigated. The 3-week-old runner plants, grown in 21-cell propagation trays, were potted and cultivated in growth chambers with $25^{\circ}C/15^{\circ}C$ (day/night) temperatures, 70% relative humidity (RH), and light intensity of $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ photosynthetic photon flux density (PPFD) provided by white light emitting diodes (LEDs). The runner plants were treated with one of three concentrations, 0 (control), 100, and $200mg{\cdot}L^{-1}$ of BA, $GA_3$, or SA solution. The chemicals were sprayed two times on leaves of runner plants at an interval of two weeks. After 9 weeks the results showed that the application of all chemicals caused reduction of root length and chlorophyll (SPAD) content as compared to the control. The lowest chlorophyll (SPAD) content was recorded in plants treated with $GA_3$. However, the treatment of $200mg{\cdot}L^{-1}$ $GA_3$ promoted leaf area, leaf fresh weight, and plant fresh weight. The greatest flower induction (85%) and number of inflorescences (4.3 inflorescences per plant) were observed in the treatment of $200mg{\cdot}L^{-1}\;SA$, followed by $100mg{\cdot}L^{-1}\;SA$. Overall, results suggest that foliar application of $GA_3$ solution could accelerate plant growth, while foliar application of SA solution could induce hastened flowering. Further studies may be needed to find out the relationship between $GA_3$ and SA solutions treated in a combination, and the molecular mechanism involved in those responses observed.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.203-208
• /
• 1998

The photochemical reactivities of 2-halobenzyl phenyl ether, in which 2-halobenzyl moiety are tethered to phenyl moiety by the etheral alkyl linkage, has been studied. In the presence of nitrogen, the photochemical reaction of 2-chlorobenzyl phenyl ether (1) produces mainly phenol and photo-Fries type reaction products, while the corresponding bromo analog 2 produces photocyclization and photoreduced products, along with phenol and photo-Fries type products. The former result implies that since chlorine is bound to the benzyl ring firmly, the rather weaker $CH_{2}-O$ bond of 1 is cleavaged to produce the photo-Fries type product. The latter implies that the photoinduced fission of phenyl-bromine bond of 2 can compete with the fission of $CH_{2}-O$ bond, since the bond energy of phenyl-bromine is lower than that of phenyl-chlorine. Since by the presence of oxygen the formation of phenol is not affected much, the formation of photo-Fries type products is changed a little, and the formations of photocyclization and photoreduced products are affected effectively, a singlet state is involved in the formation of phenol, and both singlet and triplet state may be involved in the formation of photo-Fries type reaction, while a triplet state is involved in the formation of photocyclization and photoreduction products.

• Membrane Journal
• /
• v.20 no.2
• /
• pp.142-150
• /
• 2010

A series of anion exchange composite membranes were prepared and characterized for electrodialysis processes used in the removal of nitrate nitrogen and ions in groundwater. The membranes were prepared as follows; first, fabric substrates were fully impregnated with monomer mixtures of vinylbenzylchloride (VBC), divinylbenzene (DVB), Styrene (ST) and $\alpha,\alpha$-Azobis(isobutyronitrile) (AIBN). Second, they were thermally polymerized to yield crosslinked poly (VBCST- DVB)/fabric composite membranes. Finally, the membranes were treated with trimethylamine (TMA) / acetone to give $-N^+(CH_3)_3^-$-containing poly(VBC-ST-DVB)/fabric membranes. The basic membrane properties such as ion exchange capacity (IEC), electric resistance and water content of the resulting membranes were measured as a function of VBC/DVB and TMA/Acetone content. As a result, the composite membranes showed lower electric resistance and higher IEC than commercial anion exchange membranes (AMX, Astom). Electrodialysis tests using the prepared membranes were carried out for the removal of various ions such as $NaNO_3$, $MgSO_4$ and NaF for 60 minutes. The results showed that the ions were removed below 1 mg/L within about 15 minutes which indicates that the anion exchange membranes prepared here could be applied to the electrodialysis process. as can be seen in the following that the ion conductivity values were almost no change after 15 minutes electrodialysis.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.425-429
• /
• 1997

Polyisobutenylsuccinic anhydride(PIBSA), an intermediate for the lubricating oil additive, was prepared by the reaction of polyisobutylene(PIB) with maleic anhydride (MA). The functionality, which indicates the extent of reaction of PIB-a and MA, was determined in the various reaction conditions : fuctionality was 0.98 under the reaction conditions of no solvent for 12 hours at $190^{\circ}C$, 0.21 in benzyl alcohol solvent for 12 hours at $190^{\circ}C$, and 0.03~0.20 with various Lewis acids such as $AlCl_3$, $SnCl_4$, $Et_2AlCl$, and $TiCl_4$. The fuctionality also depended on the structure of PIBs. As ${\alpha}$-olefin content (exo-form) in PIB increased, the fuctionality had a higher value. The structure of PIBSA prepared from PIB and MA was determined with FT IR and $^1H$ NMR spectroscopy. Two strong anhydride IR bands at 1782 and $1855cm^{-1}$ were obserbed and two IR bands at 1639 and $897cm^{-1}$ for unsaturated groups of PIB disappeared. The presence of the anhydride was difficult to find by $^1H$ NMR spectroscopy because the anhydride protons gave relatively small peaks over a 2.0~3.0 range. Polyisobutenylsccinimide (PIBSI), a lublicating oil additive, was prepared by the reaction of PIBSA with diaminoethane.

• Journal of the Korean Chemical Society
• /
• v.54 no.6
• /
• pp.687-695
• /
• 2010

Complexes of thiocyanato(L)cobaloximes where L is urea, acetamide, semicrabazide and formamide were synthesized and characterized. The reaction of thiocyanato (L) cobaloximes (SCNCo$(DH)_2$(L)) with benzyl (aquo) cobaloxime $PhCH_2Co(DH)_2(OH_2)$ was found to produce a series of thiocyanato bridged dicobaloximes of a general formula of $PhCH_2Co(DH)_2SCNCo(DH_2)(L)$. Evidence for formulation as dicobaloximes containing thiocyanato ligand bridges was obtained from infrared data which show $20-45cm^{-1}$ increase in vCN upon formation of the dicobaloxime from the corresponding terminal thiocyanocobaloxime (SCNCo$(DH)_2$(L)). Further characterization of these two series was done on the basis of ($^1H$,$^{13}C$)NMR, LCMS and elemental analysis. Anti-microbial activity of thiocyanato(L)cobaloximes and thiocyanato bridged dicobaloximes were screened against E. Coli. The DNA-binding behaviors of both monomers and dimers were investigated by spectroscopic methods and viscosity measurements. The results indicated that the dimer complexes bind with calf-thymus DNA in an intercalative mode via the terminal benzyl ring into the base pairs of DNA. It was observed that the monomer complexes did not interact with DNA. Fluorescence spectra for the interaction between thiocyanato bridged dicobaloximes and DNA were also studied.