• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.1-7
• /
• 2014

A variable displacement vane pump is possible to improve the fuel economy by varying the pump capacity with a vane mechanism according to the engine operating speed range and reducing its driving torque. In general the experimental evaluation of the vane pump for the transmission has been performed mainly not with the vehicle or dynamometer test rig but with component test rig due to the implementation and safety problems. In this paper, in order to evaluate the performance of the developed vane pump as well as the compatibility with other rotary and hydraulic components of the target transmission, the transmission dynamometer based test rig is implemented where the developed pump is built into it and then the variable pump capacity and effect of power reduction are investigated experimentally.

• 자동차안전학회지
• /
• 제14권1호
• /
• pp.55-61
• /
• 2022

Along with global environmental issues, the size of the electric vehicle market has recently skyrocketed. Various efforts have been made to extend mileage, one of the biggest problems of the electric vehicles, and development of batteries with high energy densities has led to exponential growth in mileage and performance. However, proper thermal management is essential because these high-performance batteries are affected by continuous heat generation and can cause fires due to thermal runaway phenomena. Therefore, thermal management of the battery is studied through the optimal design of the guide vanes, while utilizing the existing battery casing to ensure the safety of the electric vehicles. A battery from T-company, one of a manufacturer of the electric vehicles, was used for the research, and the commercial CFD software, ANSYS CFX V20.2, was used for analysis. The guide vanes were derived through optimal design based on a genetic algorithm with flow analysis. The optimized guide vanes show improved heat removal performance.

• 대한전자공학회논문지TC
• /
• 제37권6호
• /
• pp.1-11
• /
• 2000

본 논문에서는 WDM 망에서 연결의 설정 및 해제를 효율적으로 제어하기 위한 분리 제어 신호방식 (Separated Control Signaling Protocol : SCSP)을 제안하였다. 제안된 분리 제어 신호 방식은 기존의 연결 제어 기능을 파장 및 각 노드 자원의 가용성을 점검하는 호 제어와 망 자원의 예약 및 할당을 위한 베어러 제어로 분리함으로써, 자원을 예약하기 전에 망 자원의 가용성을 점검하고 망 자원의 예약 시간을 줄일 수 있도록 하여 효율적으로 망 자원을 이용하며 또한 연결 설정 요청 수락률을 증가시킬 수 있다. 분리 신호 방식을 위한 노드 구조는 호 제어 기능을 수행하는 호 제어기와 베어러 제어 기능을 수행하는 베어러 제어기로 구성하였으며, 이에 대한 각 제어기의 기능과 제어기간의 정보 교환을 위한 제어 메시지 및 프리미티브를 정의하고 상태 천이도를 설계하였다. 이를 기반으로 분리 신호 방식에서의 연결 설정, 해제 및 실패에 대한 정보 흐름도를 작성하였다. 제안된 분리 제어 신호 방식의 성능 평가를 위해 다양한 시뮬레이션을 수행하였다. 성능 평가 결과 연결 요청 거절 확률과 자원의 이용률 측면에서 분리 제어 신호 방식이 기존의 통합 제어 신호 방식보다 우수한 성능을 보임을 확인할 수 있었다

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.137-143
• /
• 2012

In this study, it was conducted to design each components of vane damper for industrial flow control fan and the flow rates were analysed by experimental and numerical method. Through environmental test, it could be confirmed that the designed vane damper was appropriate. Also, almost identical results with test could be drawn from numerical method. Finally, flow rates of electric and pneumatic actuator were measured by test. As the results, difference of flow rate according to opening ratio was smaller in pneumatic actuator than that in electric actuator.

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1042-1050
• /
• 2003

A heating flow discharged from a 4-way ceiling type indoor unit has been investigated to determine the design parameters for the optimal flow control. The flow was measured by a PIV(particle image velocimetry) system and an experimental model of 1/10 scale with a transparent room was devised by satisfying the Archimedes number. This similarity is generally used in cases where the forced convection has similar magnitude of the natural convection. To optimize the heating flow, several vane angles and vane control algorithms of cross and right angle controls were considered. Regarding the vane angle, experimental results show that 30$^{\circ}$is an optimal angle to avoid re-suction flows without significant increase in flow noise. Temperature distribution measured in the environmental chamber ensures the increased thermal comfort when compared to the case, 60$^{\circ}$angle. At the optimal angle, applying open/close control gives rise to more uniform distribution of the heating flow than without control. Especially, the cross-control seems to be satisfactory for thermal comfort.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.533-536
• /
• 2002

A heating flow discharged from a 4-way ceiling type indoor unit has been investigated using a PIV(particle image velocimetry) system For the PIV measurements, an experimental model of 1/10 scale with a transparent room was devised by satisfying the Archimedes number, which is generally used in case that the forced convection has the similar magnitude as the natural convection. To optimize the heating flow, several vane angles and vane control algorithms of cross and right angle controls were considered. Regarding the vane angle, the experimental results show that it should be less than $30^{\circ}$ to avoid re-suction flows which decrease the performance of the air-conditioner. At the vane angle of $30^{\circ}$, applying open/close control gives nae to more uniform distribution of the heating flow than without control. Especially, the cross-control seems to be satisfactory for the thermal comfort.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.555-560
• /
• 2000

The modeling and the numerical analysis are done so as to develop the Computer Aided Design program for the design of flow control valve attached to the vane pump. The factors affecting the flow rate characteristics, are analyzed by the experiments and the numerical methods. It is shown that the main factor affecting to the first control flow is the diameter of small rod of the spool, the main factor affecting to the second control flow is the diameter of big rod of the spool, the main factors affecting to the cut off are the main spring constant, the initial displacement of main spring and small diameter of the spool, and the dropping slope characteristics of flow rate are decided by the chamfer of spool and the dynamic characteristics of the spool.

• 로봇학회논문지
• /
• 제5권2호
• /
• pp.160-168
• /
• 2010

In order to achieve a force controller with high performance, an accurate torque servo is required. However, the precise torque servo for a double vane rotary actuator system has not been developed till now, due to many nonlinear characteristics and system parameter variations. In this paper, the torque servo structure for the double vane rotary actuator system is proposed based on the torque model. Nonlinear equations are set up using dynamics of the double vane rotary hydraulic actuator system. Then, to derive the torque model, the nonlinear equations are linearized using a taylor series expansion. Both effectiveness and performance of the design of torque servo are verified by torque servo experiments and applying the suggested torque model to an impedance controller.

• 한국해양환경ㆍ에너지학회지
• /
• 제14권1호
• /
• pp.11-18
• /
• 2011

암초형 월류 파력발전 시스템은 암초형 구조물에 입사 되는 파랑 에너지를 낙차로 전환하고 이를 전기 에너지로 변환 시키는 파력 발전 방식이다. 기존 연구에서 월파제의 사면 경사, 천단고, 가이드 베인 형상에 따른 월류 성능이 연구 되었다. 본 연구에서는 이러한 기존 연구를 통해 설계된 1/7 축소 모형을 제작하고 수차 터빈 및 발전 시스템, 전력제어시스템, 운전제어 및 모니터링 시스템을 연계하여 통합 축소 모형 시스템을 구축하였다. 이러한 시스템에서 서로 다른 파고와 주기를 갖는 파에 따른 월류량과 발전량을 계측하여 기존 연구와 비교 검증하였다. 이를 통해 설계시 계획한 월류량과 발전량을 확인하였고 다수 터빈에 의한 효율적인 제어 시스템 구동 방안을 제안하였다.

• 전자통신동향분석
• /
• 제16권2호통권68호
• /
• pp.53-62
• /
• 2001

BICC 프로토콜은 광대역 패킷 네트워크 위에서 기존 PSTN/ISDN 네트워크 인터페이스와 서비스에 어떠한 영향도 주지 않으면서 PSTN/ISDN 서비스를 제공하기 위한, ISUP 신호 프로토콜 기반의 호 제어 신호 프로토콜이다. 본 고에서는 BICC 네트워크의 구조 및 구성 요소, BICC 프로토콜의 동작 절차, 그리고 BICC 표준 문서의 구성과 체계를 소개한다. 또한 IP 베어러 연결을 설정하기 위하여 새로 정의한 IPBCP 프로토콜을 기술하고, 마지막으로 향후 BICC 프로토콜의 표준화 전망을 기술한다.