• Journal of Advanced Navigation Technology
• /
• v.15 no.3
• /
• pp.441-448
• /
• 2011

It is very important that establishing the valve train equations and representing the behavior of the valve train parts. To maintain the specific efficiency of running engine, the cam profile of valve train has more specific influence on the adequate behavior of the valve train than a valve clearance, heat-resistance and durability of parts. The polynomial cam, the multipol cam and polydyne cam profie are widely used to represent cam behaviour. In this study, using polydyne cam design profile equations which is more adequate for representing high speed engine, the geometrical modeling and mathmatical variable analysis are established to analysis the valve behaviour.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.7
• /
• pp.1179-1184
• /
• 2003

The technique for measuring the rotational speed of tappet in direct acting type valve train system has been developed. The optic signal monitoring system with laser and optic fiber was designed to follow the signal of tappet rotation. The system was based on ON/OFF signal generation from the additional encoder teeth under the tappet with optic fibers attached photo transistor. The data showed that tappet rotation was affected by offset, oil temperature and cam shaft operating speed. Also it was found that tappet rotation increases with oil temperature. Tappet spin was delayed 10∼s20$^{\circ}$ cam angle after valve opening. The instantaneous rotational speed of tappet was reciprocal to cam shaft speed and the tappet and the cam angle ratio was located in the range of 0.1∼0.3.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.342-346
• /
• 1998

최근의 자동차엔진에서 사용되는 윤활유에는 여러 가지 첨가물이 사용된다. 특히 고분자량 폴리머계의 점도 지수 향상제를 윤활유의 원유에 첨가함으로써 온도 증가에 따른 점도 불안정성을 방지하는 다등급 윤활유 성격을 얻을 수 있다. 그러나 이러한 고분자량 폴리머계의 첨가물은 고온의 엔진 운전 조건에서 윤활유의 점도 안정성을 보장해줌에도 불구하고 엔진 부품들의 정상적인 운동 속도에서도($1-^6 S^{-1}$) 고 전단 변형율 속도로 인하여 유막 감소 효과를 발생 시킨다. 또한 이 첨가제들은 엔진 부품의 마찰 표면에 큰 전단 응력을 지닌 끈끈한 형태의 경계막을 형성한다. 고분자량 폴리머계의 점도 지수 향상제에 대한 예기치 못한 영향은 유막 감소 효과로 인하여 엔진 부품간의 마모를 증가 시키고 점도의 감소로 마찰을 감소 시키는 반면 경계막으로 인하여 고체면이 보호를 받는데 있다. 이러한 유막 형성의 물리적인 개념에 대하여 고체면의 끈끈한 경계막의 존재 효과와 두 경계막 사이에서 일어나는 유막 감소 효과를 표현할 수 있는 현실적인 해석의 필요성이 제기된다. 본 연구는 최근에 많이 쓰이고 있는 점도 향상제가 첨가된 윤활유가 자동차 밸브 트레인 시스템에서 유막 형성에 미치는 영향을 마찰 효율과 마모 방지의 입장에서 고찰하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.286-291
• /
• 1998

The aim of this paper is to measure the tappet rotation in OHC valve train system. Tappet is eccentric from the cam center to rotate for preventing the partial wear. The experimental system is developed to measure the tappet rotation by using the laser beam and optical fiber. The characteristics of tappet rotation is presented for various operating conctitions. Specially, it is observed that tappet is rotated at the base circle.

• Tribology and Lubricants
• /
• v.14 no.1
• /
• pp.23-27
• /
• 1998

The characteristics of friction in direct acting OHC vane train system have been investigated by the comparison of experimental and theoretical results. A modified friction model was presented to calculate the friction force at cam/tappet contact. A simple experimental system was evaluated to measure the friction force and the camshaft driving torque. The friction force was measured by using the dynamic loadcell. Good agreement was found between theoretical and experimental results in friction force, but there was a little difference in driving torque.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.78-87
• /
• 1998

A dynamic model of direct-acting OHC valve train system has been used to determine the load conditions in the system. The modified equations for calculating the friction forces between cam and HLA, and at a camshaft bearing have been defined considering the lubrication conditions. Then, to understand the frictional characteristics in the system, a parameter study has been performed. As the results of the analysis, valve spring stiffness and preload have great effects on the friction in the system, but the effects of other parameters are negligible. So, how to design the valve train system with respect to the reduction of friction is to minimize the valve spring stiffness and preload in the limit of satisfying the dynamic constraints.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.10
• /
• pp.1364-1369
• /
• 2002

This paper introduces the development of the analysis and design program of valve train system. In order to verify the stability of design and improve the performance of system efficiently, it is required that integrated and interactive simulation program. The presented program is developed in the base of the object-oriented, capsulation, modulization, OLE (objected linking and embedding) and various design theory. It contains the expandability and flexibility of the structure. In addition to that, it is programmed to make the convenient user interface by using the visualization programming. This program can support the modification of the valve element as well as the development of the valve train system in the beginning of design. It is expected to save the cost and time for the design of valve train system.

• Journal of ILASS-Korea
• /
• v.22 no.1
• /
• pp.22-28
• /
• 2017

In this study, the effects of intake valve closing timing by using Cam-in-Cam system on combustion and emission characteristics for diesel engine were investigated under GT-POWER simulation environment. As a result, it was found that volumetric efficiency and effective compression ratio were decreased as the intake valve closing(IVC) timing is retarded due to its backflow effect. Also, we found that in-cylinder pressure, heat release rate and NOx emission were decreased as IVC timing was retarded. These show that the LIVC(late intake valve closing) can be effective to control AFR and mixing rate in diffusion combustion of diesel engine.

• Tribology and Lubricants
• /
• v.14 no.3
• /
• pp.81-86
• /
• 1998

The purpose of this paper is to measure the rotational speed of tappet in OHC valve train system. Tappet has eccentricity about cam center, which induces the tappet rotation and prevents from wear. In this paper, the experimental test rig which composes of one cam system is developed to measure the tappet rotation by using the laser generating system, rotary encoder, optical fiber, and photo transistor. The direction of tappet rotation is judged from the oder of optical signal. As results of experiment, average and instant rotational speed and average rotation angle per one cam revolution are presented. Measured results show that eccentricity ratio is dominant factor for the tappet rotation, and tappet is rotated at the base circle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.34-43
• /
• 2002

This paper focused on the dynamic behavior of camshaft in a direct acting type valve train system. To investigate camshaft behavior, transient vibration analysis is performed by using the transfer matrix method. The camshaft is treated as a lumped mass system supported by spring and damper, From the presented analytical model, we could predict dynamic behavior of camshaft, shaft locus within bearing and bearing load. The presented model and results will be very helpful to design the optimal camshaft and valve train system.