• The KSFM Journal of Fluid Machinery
• /
• v.8 no.6 s.33
• /
• pp.15-25
• /
• 2005

Check valves playa vital role in the operation and protection of nuclear power plants. Check valves failure in nuclear power plants often lead to a plant transient or trip. The analysis of historical failure data gives information on the populations of various types of check valves, the systems they are installed in, failure modes, effects, methods of detection, and the mechanisms of the failures. A majority of check valve failures are caused by improper application. The experimental apparatus is designed and installed to measure the disc positions with flow velocity, Vopen and Vmin for 3 inch and 6 inch swing check valves. The minimum flow velocity necessary to just open the disc at a full open position is referred to as Vopen, and Vmin is defined as the minimum velocity to fully open the disc and hold it without motion. In the experiments, Vmin is determined as the minimum flow velocity at which the back stop load begins to increase after the disc is fully opened or the oscillation level of disc is reduced below $1^{\circ}$. The results show that the Vmin velocities for 3 inch and 6 inch swing check valves are about 27.3% and 17.5% higher than the Vopen velocities, respectively.

• The KSFM Journal of Fluid Machinery
• /
• v.8 no.3 s.30
• /
• pp.16-25
• /
• 2005

The purpose of this study is localization of safety relief valves for Nuclear Service. The safety relief valve is the important equipment used to protect the pressure vessel, the steam generator and the other pressure facility from overpressure by discharging the operating medium when the pressure of system is reaching the design pressure of the system. We developed design technology used FEM ' CFM about safety relief valve for Nuclear Service according to ASME (or KEPIC) Code and KHNP's Technical Specification. To prove validity of a design technology, actually, we manufactured and inspected and tested the sample products designed according to a developed technology. The capacity qualification test was achieved according to requirement of ASME(or KEPIC) Code by NBBI and the functional qualification test was achieved according to ASME QME-1 for operating condition in technical specification of KHNP by NLI. Therefore we have to achieve the development of safety relief valves for Nuclear Service with our own technologies.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2093-2095
• /
• 2004

본 논문은 압전소자를 구동장치로 사용한 마이크로 펌프의 제작과 실험에 관한 논문이다. 마이크로 펌프의 상부기판은 polydimethyl siloxane(PDMS)을 소재로 미세유로에 상시 닫힌 밸브가 일체화된 구조로 제작되었고, 하부기판은 polymethyl methacrylate(PMMA)를 소재로 3개의 압전 디스크가 구동기로 부착되었다. 최종적으로 상, 하부 기판은 액상 PUMS로 접합하여 제작했다. 구동기의 입력신호는 6상으로 구형파를 인가하여 연동구동하며 주파수와 전압을 가변하면서 유량을 측정하였다. 구동 주파수가 0.167 Hz이고 전압이 20 V일 때, 마이크로펌프의 1회 토출량은 104 nl이고, 유량은 1.04${\mu}{\el}$/min이다.

• Tribology and Lubricants
• /
• v.20 no.5
• /
• pp.231-236
• /
• 2004

Sulfur Hexafluoride, S $F_{6}$ is widely used for leak detection and as a gaseous dielectric in transformers, condensers and circuit breakers. S $F_{6}$ gas is also effective as a cleanser in the semiconductor industry. This paper presents a numerical study of the sealing force of disk type seal in S $F_{6}$ gas safety valve. The sealing force on the disk seal is analyzed by the FEM method based on the Taguch's experimental design technique. Disk seals in S $F_{6}$ gas safety valve are designed with 9 design models based on 3 different contact length, compressive ratio and gas pressure. The calculated results of Cauchy stress and strain showed that the sealing characteristics of Teflon $^{ }$PTFE is more effective compared to that of FKM(Viton), which is related to the stiffness of the materials. And also, the contact length of the disk seal is important design parameter for sealing the S $F_{6}$ gas leakage in the safety valve.afety valve.

• Journal of Engineering Education Research
• /
• v.19 no.6
• /
• pp.44-48
• /
• 2016

This research is one of the Industry-University cooperation in idea factory of Korea Maritime and Ocean University. Idea factory of Korea Maritime and Ocean University is trying to train creative talented students and discover ingenious ideas. The contents are consisted of the possibility for the replacement of a metal valve disk to composite valve disk in butterfly valve based on the diversification. Purpose in this study is to predict failure field by each fly by appling Tsai-Wu Failure Index.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.6
• /
• pp.109-114
• /
• 2001

Forming pressure of the rupture disc has been analyzed theoretically and verified by experiments. Final shape of the rupture disc after forming process is assumed to be hemi-ellipsoid for small height of the rupture disc. The predicted forming pressures are in good agreement with those by experiment. A new simple model has been proposed to predict the burst pressure of the rupture disc. Experimental results show that the proposed model of burst pressure describes the bursting characteristics of the rupture disc very well.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.91-91
• /
• 2009

Piezoelectric micro-pump should contain the physical running parts like check valves for acquiring the unilateral motion of fluid from the alternating motion of actuators. But the check valves raise many problems such as abrasion or exhaustive destruction by the recursive mechanical displacement To solve these problems, we propose a novle type piezoelectric valveless micro-pump using peristaltic motion due to the traveling wave excitation. Proposed pump model is consisted of two piezoelectric ceramic plates, elastic metal body, caps for covering flow path, rubber rings for sealing tightly and disk springs for the pressurization of pump body.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.140-145
• /
• 2004

In this study, the design and analysis of a butterfly valve disk was performed to minimize the rubbing between the disk and the seat at opening and closing. The butterfly valve has double eccentric structure and the contact surface between the disk and the seat is a conical surface. At the instant of opening and closing the valve by the rotation of disk, the positions of zero contact point are changed. Also, if the cone surface is cut in the perpendicular direction to the rotation axis of the valve, the contour of cutting section is hyperbolic. Therefore minimum distance between the origin of the eccentric axis and the hyperbolic curve goes to the position of zero contact point. In order to consider the interferences between the disk and the seat, the thermal-structure coupled field analysis was performed by ANSYS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1824-1827
• /
• 2005

For application to micro fluid control systems such as ${\mu}TAS$ (Micro Total Analysis Systems) and DDS (Drug Delivery Systems), it is very significant to handle precise and minute flow rates with low pressure pulsation. In this study, a novel valveless piezoelectric pump using peristaltic motion with three disk type PZT actuators is presented. The newly devised pump with an effective size of $70mm{\times}60mm{\times}55mm$ has three actuator layers connected in series from inlet to outlet. The PZT actuator has a maximum displacement of 240 ${\mu}m$ and a maximum force of 1.6 N. When the driving voltage for PZT actuators is sequentially applied with a certain phase shift, the pumping is performed by peristaltic motion of liquid volume. The working fluid is shut off without the driving voltage. Three methods for sequential driving are proposed and experimentally investigated. First and second methods utilize an intermittent sinusoidal waveform with phase shift of $90{\circ}\;and\;120^{\circ}$, respectively. Third method uses a rectangular waveform with phase shift of $90^{\circ}$. A controller with multi-phase shifter is designed and fabricated. Then, frequency and voltage-flow rate characteristics and load pressure-flow rate characteristics are experimentally investigated to verify the validity of the developed pump.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.159-159
• /
• 2009

Existence of physical moving parts (ex. check valve) produces several problems (mechanical abrasion, deterioration of reliability, limited temperature performances etc.) in driving pumps. To overcome such problems, we proposed a valveless piezoelectric micro-pump which has new type volume transferring mechanism. The proposed micro-pump has a double faced disk type vibrator that can generate peristaltic motion formed by traveling wave in each surface of a disk. This type of micro-pump is able to apply to a fluid supply system that provides two different kinds of fluid simultaneously. In this paper, we propose a simple and novel design of piezoelectric micro-pump that is peristaltically by piezoelectric actuators and allows the removal of the need for valves of other physically moving parts. The finite elements analysis on the proposed pump model was carried out to verify its operation principle using the commercial analysis software.