• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1489-1501
• /
• 2018

In 2016 Kumamoto, Japan, the foreshocks of $M_j$ 6.5 and 6.4, mainshock of $M_j$ 7.3 besides more than 2,000 aftershocks occurred in succession. Large surface deformation occurred due to this serial earthquakes and three-dimensional measurements of the deformation have been presented for the study of fault structures (Baek, 2017). The 3d measurements retrieved from two ascending pairs (20160211_20160602, 20151119_20160616) and a descending pair (20160307_20160418) acquired from ALOS PALSAR-2. In order to avoid mixing ionospheric error components on along-track surface deformation, the descending multiple-aperture interferogram, which do not contain the deformation of aftershocks after 20160418, was utilized. For these reason, there was a temporal discrepancy of about 2 months in extracting the north-south deformation. In this study, we applied a directional filter based ionospheric correction to ascending multiple-aperture interferograms, in order to reduce this discrepancy and understand more accurate fault movements. As a result of the ionospheric correction, an additional displacement signal was observed nearby fault lines. The root-mean-squared errors compared to GPS were about 9.87, 8.13 cm respectively. These results show improvements of 4.8 and 6.4 times after ionospheric correction. We expected that these along-track measurements would be used to decide more accurate movements of faults related to the 2016 Kumamoto Earthquake.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.119-124
• /
• 2019

Radiation therapy using flattening filter free beam can prevent beam attenuation caused by flattening filter and can improve treatment efficiency. However, accurate dose control is not established for nonuniform iso dose distributions. In this study, curved dosimeter based on photoconductive material $HgI_2$ was fabricated and its reproducibility and linearity were evaluated at 6 MV photon energy to verify its performance. In order to show the usefulness of the curved measurement, the signals measured on the flat substrate and the curved substrate were compared in the flattening filter free beam using the acrylic filter. As a result, the reproducibility of the unit cell dosimeter was evaluated as SE 0.613%, and the linearity was evaluated as R-sq 0.9999. The usability evaluation of the array curve dosimeter demonstrated its usefulness by indicating a curvature error rate of 11.073%p and a reduced error rate.

• Journal of Chest Surgery
• /
• v.38 no.12 s.257
• /
• pp.821-827
• /
• 2005

Background: Hemodilution after priming of the cardiopulmonary bypass is known to increase the possibility of bleeding and homologous transfusion in adult cardiac surgery. We investigated the effects of retrograde autologous priming (RAP) to see whether it would decrease postoperative bleeding and homologous transfusion. Material and Method: We retrospectively reviewed 34 patients wpho underwent RAP and 46 patients who did not. Retrograde autologous priming consisted of arterial lire drainage, venous reservoir and oxygenator drainage and venous line drainage. We compared the amount of priming solution and RAP volume, perioperative hematocrit, postoperative bleeding and transfusion requirements in the two groups. Resuit: Mean withdrawal volume in RAP group was 613.5$\pm$160.6 mL and initial priming volume was 1381.9$\pm$37.2 mL. Hemoatocrits ($\%$) in RAP and control groups were 25.0$\pm$3.7 vs 20.9$\pm$3.6 (5 minutes after CPB), 25.9$\pm$3.7 vs 22.5$\pm$3.6 (30 minutes after CPB), 25.9$\pm$3.4 vs 23.8$\pm$2.8 (60 minutes after CPB), 31.9$\pm$3.9 vs 31.5$\pm$4.5 (postoperative 1 hour), 32.4$\pm$4.4 vs 32.1$\pm$4.5 (postoperative 6 hours), 33.4$\pm$5.0 vs 31.7$\pm$5.1 (postoperative 1 day)[repeated measures ANOVA, p < 0.05]. Chest tube drainages (mL) in the two groups were 357.2$\pm$177.1 vs 411.7$\pm$279.5 (postoperative 6 hours), 599.4$\pm$145.6 vs 678.8$\pm$256.4 (postoperative 24 hours)[t-test, p < 0.05]. Homologous transfusion was performed in 7 out of 34 patients in RAP group (20.6$\%$), and 16 out of 46 (34.8$\%$) in control group (p < 0.05). Conclusion: This study suggests that the effects of reducing the priming volume during cardiopulmonary bypass may result in lesser bleeding and homologous transfusion. Retrograde autologous priming would be used to reduce postoperative bleeding and chance of transfusion after adult cardiac surgery.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.103-110
• /
• 2017

In Concentrated Animal Feeding Operations(CAFOs), emission of ammonia from stored manure contributes negatively on the wellness of livestock. In CAFOs facilities, indoor aerial ammonia concentration oftentime surpasses the critical level potentially harmful to livestock's immune system. Understandably, numerous researches to control aerial ammonia have been conducted in countries where CAFOs were practiced for many decades. Some innovative technologies, such as scrubber, bio-filter, and additives emerged, as a result. Among them, microbial additives became popular in Korea, due to an easiness of use and affordability. However, microbial additives still have some weaknesses. Their price is still high enough to discourage farmers who run a small scale farm and their effectiveness are still questioned by many users and researchers. In the present study, we found soluble carbohydrates, such as sugar, glucose, and molasses, when supplemented to pig slurry manure, can mitigate ammonia emission. To be more specific, pig manure slurry(120kg), stored in container(200L), was supplemented with sugar at 0.1%(w/w) and was, subsequently, monitored for pH and aerial ammonia for next 10 days. From this experiment, it was found that the sugar supplementation was effective in mitigating the aerial ammonia concentration (33% in average) when monitored daily. Also, the pH of manure slurry was maintained at relatively low level(8.2) in sugar-supplemented manure slurry while it was elevated to 8.5 in untreated slurry. Conclusively, the obtained data suggest that soluble carbohydrate can mitigate ammonia emission by acidifying manure slurry. Additionally, it can be suggested that soluble carbohydrates, such as sugar, glucose, and molasses, can be reasonable choices for animal farmers who have been looking for an alternative choice to replace expensive microbial additives.