• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.1-8
• /
• 2015

To produce the white light, there are a single chip method using the blue light and phosphor coating, a multi chip method by mixing R, G, B light.. Multi chip method is proper for the smart lighting system by controling color and color temperature. And color rendering of single chip LED is good by even spectral distribution. To apply application technic like smart light system, this paper analyzed the properties of single chip LED and RGB multi chip LED, and implemented the 2 part subject evaluation for single chip LED and RGB multi chip LED. The first part is comparison of properties for single chip LED and RGB multi chip and second part is color appearance evaluation of 8 colors in each lighting environment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.1
• /
• pp.102-107
• /
• 2011

LED-based lighting motivated by significant energy savings provides an opportunistic development of widespread free-space optical communications. Their transceivers have a variety of competitive advantages over RF including high bandwidth density, reliability, lower energy consumption, and long lifetime. But, it is difficult for existing buildings and structures such as ships and vehicles to install the communication cable to the ceiling. In this paper, controller area network (CAN)-based LED lighting communication systems were proposed. Results indicate the viability of developing inexpensive CAN interface modules and transceivers might be embedded in lighting products to support the indoor wireless networking.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.5
• /
• pp.233-240
• /
• 2012

White LEDs (light-emitting diodes) are promising new-generation light sources which can replace conventional lamps due to their high reliability, low energy consumption and eco-friendly effects. This paper briefly reviews recent progress of oxy/nitride host phosphor and quantum dot materials with broad excitation band characteristics for phosphor-converted white LEDs. Among oxy/nitride host materials, $M_2Si_5N_8$ : $Eu^{2+}$, $MAlSiN_3$ : $Eu^{2+}$ M-SiON (M = Ca, Sr, Ba), ${\alpha}/{\beta}$-SiAlON : $Eu^{2+}$ are excellent phosphors for white LED using blue-emitting chip. They have very broad excitation bands in the range of 440~460 nm and exhibit emission from green to red. In this paper, In this review we focus on recent developments in the crystal structure, luminescence and applications of the oxy/nitride phosphors for white LEDs. In addition, the application prospects and current trends of research and development of quantum dot phosphors are also discussed.

• Journal of the Korean Chemical Society
• /
• v.61 no.4
• /
• pp.163-167
• /
• 2017

Along with the progress of white LED technology, red phosphors have become increasingly important in industry and academia, and a more specific demand has steadily increased in the market. Red phosphors are used in high efficiency and high rendering LED lightings. However, using red phosphors with $Eu^{2+}$ activators caused color rewarming and reduced emission intensity in white LED chips due to strong reabsorption in the green or yellow wavelength range caused by the 4f-5d transition. $Mn^{4+}$ doped phosphors which have no such drawbacks and which can further improve the color rendering index (CRI) are now of great interest. However, $Mn^{4+}$-doped phosphors have a disadvantage in that the emission wavelength is determined depending on the host due to the $^2E_g{\rightarrow}^4A_2$ transition. In this study, the $SrO-BaO-GeO_2$ solid-solution was selected, and $Sr_{1-x}B_axGe_4O_9:Mn^{4+}{_{0.005}}$ ($0{\leq}x{\leq}1$) phosphors were synthesized and characterized. This led to a versatile color tuning in LED technology.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.69-78
• /
• 2010

LED technology offers versatile lighting control while having a very low environmental impact. Consequently, increasing attention is being paid to the emotional impact of LED lighting. This study investigated whether the chromacity of LED lighting influences people's time perception. To this end, two empirical studies were conducted: First, in experiment I(N=28), the subjects compared their perception of the time duration, which was varied from 3s to 20s, for 6 chromatically nuanced lighting conditions, respectively, with that under a daylight condition. The results showed that, in warm-color nuanced lighting conditions, the subjects perceived time to pass more slowly than in the daylight condition. On the contrary, in cool-color nuanced lighting conditions, the subjects perceived time to pass more rapidly than in the daylight condition. Then, in experiment II(N=39), the subjects were asked to count for 90 seconds while simultaneously performing some cognitive tasks. Confirming the results found in experiment I, the subjects perceived time to pass more rapidly in cool-color nuanced lighting conditions than in warm-color nuanced lighting conditions, although the difference was not statistically significant(p>0.05). In addition, the subjects tended to perceive the time to be shorter when the nuanced color of the light was closer to their preferred color.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.33-39
• /
• 2006

Trichromatic LED backlight renders higher colour gamut and panel transmittance to the LCDs than the phosphor-converted white LED backlight. In realization, however, several technical challenges arise, such as colour shift, due to the ambient temperature change, brightness decrease along with the temperature increase, colour mixing, minimizing the total number of chips and so on. In this paper we designed and tested the low cost temperature compensating circuit, using a thermistor as a temperature compensating element, for stabilizing the brightness and maintaining the colour coordinates of the trichromatic backlight units. By applying the temperature compensating circuit, the decrement rate of the brightness and colour shift rate were achieved by 54% and 51% respectively comparing with uncompensated case.

• Journal of Applied Reliability
• /
• v.12 no.3
• /
• pp.177-186
• /
• 2012

This paper presents a comparison of the failure mechanism for high power converted white LEDs(3W) with the commercially available YAG:Ce and silicate phosphor. We carry out the normal aging life test for 10,000 hours, the high temperature aging test for 8,000 hours, the high temperature and humidity aging test for 8,000 hours and the current aging testing for 5,000 hours. The optical and electrical parameters of LEDs were monitored, such as lumen, correlated color temperature (CCT), chromaticity coordinates(x, y), thermal resistance, I -V curve and spectrum intensity. The stress induced a luminous flux decay on LED in all experiments and causes a failure. So we try to find out what's a main failure mechanism for a high power LED.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.7
• /
• pp.463-468
• /
• 2017

Eight types of LED packages were manufactured according to the type and composition ratio of phosphors by using commercially available white LED phosphors. CRI (Ra), a conventional color quality evaluation method was evaluated by using manufactured white LED; the Rf, Rg, color vector graphic, and color distortion graphic were evaluated with a new method, IES TM-30-15. The results of the evaluation confirmed that the new method compensated for the disadvantages of CRI, which was found to be inadequate when the color was saturated. The added evaluation index identified the chroma variation and color change. Furthermore, the study showed that the changes of Rf and Rg are small when controlling phosphors based on CRI, questioningthe necessity of identifyingchroma variation and color change.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.1
• /
• pp.42-47
• /
• 2016

This study was conducted to investigate visual threshold of nigro (Cichlasoma nigrofasciatum) on white LED light. The visual threshold was obtained by analyzing electrocardiogram (ECG) of the nigro. 5 individuals (body weight: 15.62~45.49 g; TL: 8.9~12.4 cm) were trained for lights by an electric stimulus. And then the heart rate (beats/10s) before and after switching on the light were compared. Light intensity range was from 0.00 to 226.4 lux. Average heart rate was 10.36 beats/10s in the normal condition. When the fish perceived the light, the heart rate was decreased. Visual threshold of the fish was 2.59 lux.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.107-112
• /
• 2008

Solar Cell을 이용한 15W 휴대용 조명 시스템을 개발하기 위하여, 휴대용에 적합한 solar cell을 선정하고, Solar Cell을 충전하기 위한 태양광 궤적 변화에 대한 Simulation을 행하였으며, 1W 백색 LED 6EA를 사용하여 휴대용 LED Lighting System을 개발하였다. LED Lighting System은 solar cell 충방전 회로 및 LED SMPS 구동회로 설계, 글레어차단을 위한 리플렉터 설계, 방열 설계 및 기구 구조 설계를 통하여 개발되었으며, 직접 시제품을 제작하고 그 성능을 측정하였다.