• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.410-418
• /
• 2017

The stability of low-crested structure (LCS) and overtopping discharge over a seawall behind the LCS are influenced by the water level behind the structure. Hence, the experimental results can be distorted unless the increase of water level is known when two-dimensional experiment is carried out. In order to estimate increase of the mean water level behind the low-crested structure, this study applied a hybrid technique that combined results of two-dimensional model test and hydrodynamic numerical modeling based on the relationship between the water level and discharge. By using this technique, the mean water level increase and flow field can be obtained almost at the same time, which resolved the above problem considerably. In addition, this method can provide an approximate information about the outflow velocity from the openings of the structure, which is helpful for selecting appropriate planar configuration of the low-crested structure.

• Culinary science and hospitality research
• /
• v.22 no.4
• /
• pp.222-239
• /
• 2016

This study is composed of both a research of research literature and empirical analysis. With regard to literature based, consideration was given to present conditions of domestic coffee shops, thhe definition of barista, the duty characteristics baristas, and intention to change job. Empirical analysis established hypotheses and verified the effect of duty characteristics on job satisfaction and turnover intention. A survey to verifying the hypothesis of study was performed for 400 baristas who were working at their coffee shops with selecting coffee shops randomly in Seoul and Kyeonggi-do. 2012.08.15~2012.08.30, for 15 days, I performed survey, without faithless answers and questionnaires which weren't written, I used total 331 papers for actual analysis. Collected basic data were analyzed through SPSS 18.0 program by frequency analysis, correlation analysis, factorial analysis, reliability analysis, regression analysis, and so on. I suggested like this for managing effective human resources. For increasing satisfaction of duty of barista, manager should give opportunity for attending important duty to barista, and because of this, barista can feel sense of responsibility and self-esteem.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.275-282
• /
• 2006

Recently, Fiber Reinforced Polymers(FRP) has been emerged as an alternative material to solve the corrosion of steel reinforcement in reinforced concrete structures. FRP exhibits higher specific strength and lower weight compared to steel reinforcement. Moreover, good resistance to corrosion of the FRP may be useful in aggressive environments causing deterioration such as chloride environment. However, causes for higher initial cost of FRP than that of steel, little information on the long-term behavior of FRP, and brittle failure make the efforts to apply FRP in civil structures slow. Glass fiber among the fibers used to manufacture FRP can be seen as the most beneficial material with regard to initial costs. But its low elastic modulus, which attains barely a quarter of steel, nay thus lead to excessive deflections when used as reinforcement for flexural members. This research was carried out on the tensile properties of hybrid rods made with glass and carbon fibers to improve those of FRP rod made with glass fiber. Parameters were resin type and the arrangement of glass and carbon fibers. The tensile properties of hybrid rods were compared with those of rods manufactured with only glass or carbon fibers. The results indicated that the tensile properties of hybrid rod were good when the carbon fiber was arranged in the core.

• Culinary science and hospitality research
• /
• v.15 no.2
• /
• pp.121-135
• /
• 2009

The pattern of liquor consumers started to change as the well-being trend and great interest in health have risen for the last few years. In particular, consumption of wine is gradually increasing with the findings revealing that drinking proper amount of wine is good for preventing various adult diseases such as sclerosis of the arteries, heart disease and aging. Accordingly, this study aims at understanding the importance of wine buyers' choice attributes when buying and drinking wine in order to contribute to satisfying customers, popularizing wine and expanding its base. From December 1 to 31 in 2008, it made a survey on natives and weekly settled population living in Seoul area who had bought wine at a wine retail shop with literature and positive researches. It made an application of SPSS 12.0 to analyze the importance of wine buyers' choice attribution based on the demographical characteristics and use behavior with such analysis methods as the frequency analysis, the factor analysis, the reliability test, ANOVA and multiple regression. The results are summarized as follows. First, it showed that there are significant differences between buying and drinking wine by producing countries, buying places, prices, companions except for the number of drinking times, drinking places, and information sources. Second, it showed that wine buyers' choice attributes such as brand characteristics and effects on health have a positive effect on customer satisfaction.

• Journal of the KSME
• /
• v.27 no.6
• /
• pp.504-514
• /
• 1987

복잡한 전자부품의 조립시에 필요한 열적 디자인에 관한 정보는 오래전부터 실험을 통하여 얻어지고 있다. 실험적 데이터를 이용하여 무차원 파라미터로 표시된 실험결과는 꼭 같지는 않지만 현상적으로는 비슷한 상황에 응용될 수 있다. 여기서는 학술문헌에 나타나 있는 자연대류에 관한 실험적인 상관관계식들과 프레임에 수직으로 꽂혀있는 균일가열 전자회로기판의 모델에서 얻어진 무차원 자료들을 비교하고자 한다. 대부분의 자료들은 수정채널 Rayleigh수(Ra")가 15~100범위에 속하며, 이러한 범위는 부품이 조밀하게 배치된 기관이 서로 좁은 채널을 이루고 있으며, 동시에 상당한 전력을 소비하고 있는 경우에 해당한다. Wirt와 Stutzman, Bar-Cohen과 Rohsenow의 일반상관관계식은 AT'||'&'||'T Bell 연구소에서 개발된 전자기기를 이용하여 수집한 실험데이터를 잘 표현하고 있으며 10 < Ra" <1,000범위에서 추천될 수 있다. 두개의 유사한 상관관계식과 비교할 때 상당히 좋은 예측을 보였으며 또한 Sparrow와 Gregg의 연구결과와도 잘 일치하므로 Ra" < 10인 경우에 Aung의 완전발달층류의 채널유동방식, Ra" > 1,000인 경우에는 Aung등의 단일 수직평판 근사식이 추천될 수 있다. Coyne의 알고리즘에 의한 계산치는 10

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.609-616
• /
• 2017

National Geographic Information Institute has established a plan that preoccupies UCPs (Unified Control Points) at 2~3km intervals in urban areas by considering the distance between existing UCPs by satellite images and aerial photographs in 2015. In this study, we discussed the method of selecting the locations of optimal UCPs by simulating GPS reception environment in candidate sites for UCPs using GIS. For this purpose, we selected new candidate sites for installing UCPs using satellite images and aerial photographs, and analyzed the GPS reception environment by calculating the visibility distance from buildings around UCPs using GIS skyline analysis. The number of and the arrangement of visible satellites that are capable of GPS satellite reception from the viewpoint of sky view were showed by GIS skyline analysis. Quality evaluation results of GPS observation data were compared with average PDOP calculated from hourly PDOP and TEQC in two points of Sungkyunkwan University during 8 hours. As a result of GPS reception environment using GIS, if the PDOP increases, the data acquisition rate is lowed, and the multipath error and the cycle slip are increased. Thus, this study verified that the quality of GPS observation data can be secured by constructing three-dimensional spatial information and simulating PDOP when preoccupying multiple UCPs using GIS.

• Journal of Navigation and Port Research
• /
• v.37 no.3
• /
• pp.291-298
• /
• 2013

The purpose of this study was to analyze perceptions to hindering factors and development factors for water leisure activation. In order to accomplish the study purpose, this study employed a survey method with water leisure participants and employees from 6 regions(participants=205, employees=117). The data were analyzed using independent t-tests at a=.05 and following findings were derived from current study. First, among 20 hindering factors, water leisure participants had higher levels of perceptions than employees in licence system, limited activation regulation, departure report regulation, absence of exclusive organization, lack of providing information, lack of participative events and support systems. Second, relatively highly perceived hindering factors included departure report regulation, limited activation regulation, licence system, lack of government support, lack of mooring facility and lack of exclusive charged organization, in order. Third, the important development factors perceived by participants included support for licence and education and diversified water leisure programs but those perceived by employees included placement of educated experts and related event host and publicity. Finally, relatively highly perceived development factors included activation of free experience, promotion of marina development, support for licence and education, diversified programs and support for water leisure business. Accordingly, the findings provided fundamental information that both central and regional government can utilize for further activating water leisure. In addition, several development strategies were discussed on financial support, facility support, human resource support, education support and event support perspectives.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.20-26
• /
• 2018

This study was conducted to develop a device for measuring the air flow by space variation through monitoring program, which acquires data by each point from each environmental sensor located in the greenhouse. The distribution of environmental factors(air temperature, humidity, wind speed, etc.) in the greenhouse is arranged at 12 points according to the spatial variation and a large number of measurement points (36 points in total) on the X, Y and Z axes were selected. Considering data loss and various greenhouse conditions, a bit rate was at 125kbit/s at low speed, so that the number of sensors can be expanded to 90 within greenhouse with dimensions of 100m by 100m. Those system programmed using MATLAB and LabVIEW was conducted to measure distributions of the air flow along the greenhouse in real time. It was also visualized interpolated the spatial distribution in the greenhouse. In order to verify the accuracy of CFD modeling and to improve the accuracy, it will compare the environmental variation such as air temperature, humidity, wind speed and $CO_2$ concentration in the greenhouse.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.64-70
• /
• 2018

In this study, eleven major coastal areas were selected and the climate environment and the greenhouse direction were analyzed. This research investigates the greenhouse heat loss according to the wind environment at target areas. The target areas were selected based on heated greenhouse cultivation area and wind environment standard. Temperature, wind speed, and wind direction among weather data for 30 years were collected and analyzed. The data were divided into the minimum, average, and maximum temperatures and the Meteorological Agency criteria applied to the weather and wind direction criteria. Data were collected in the range of $0{\sim}180^{\circ}$ considering the symmetry of the shape of the greenhouse. In addition, the wind direction is different for each region and the applied wind direction can be different when referring to the longitudinal direction of the greenhouse and the data are collected in the range of $0{\sim}90^{\circ}$. The results of this study are expected to be used to calculate the heating load of greenhouse installed in places wind speed high.

• Cartoon and Animation Studies
• /
• s.27
• /
• pp.79-97
• /
• 2012

Comic book readers have respectively different reading speed and this means that time in comics is translated by readers' view. The authors arrange panels and gutters to control time, but time recognition in comics depends on the readers and generally it is the readers' role. On the contrary, the phenomenon having occurred by infinite canvas varied the authority of timing. Infinite canvas can give the comic book authors more authority of controlling timing than the readers by intervening in readers' relative time as an agents and transforming their fictive time into absolute time. Following to the concept of "Agency" in games, agency is the power which satisfies the players by reemergence of their intentions. Since some of digital comics absorbed the properties of other media such as animation and sound, we can see that the reader's timing agency is shifted to the author's timing agency. The purpose of this study is to analyse this phenomenon and to remind that agency motivated by the balance between material constraints and formal constraints becomes a condition of readability of digital comics but excessive timing constraints given to the readers causes a decrease of the readers' timing agency. This also can be a considerable matter when we produce digital comics.