• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.4
• /
• pp.269-275
• /
• 2017

$NO_X$ reducing technique such as LNT, LNC, and selective catalytic reduction (SCR) have been developed and applied, especially on heavy-duty vehicles. However, it is expected that $NO_X$ reduction techniques will also be applied to diesel passenger vehicles. The urea-SCR system is receiving attention as the most effective $NO_X$ reduction technology without a fuel penalty. Thus, many advanced countries are developing this technology. The urea-SCR system sprays an aqueous urea solution that separates $NO_X$ into $N_2$ and $H_2O$, which are harmless and emitted into the atmosphere. The urea injected in front of the SCR catalyst should be changed to 100％ $NH_3$, which is required for $NO_X$ reduction in the SCR system to maximize the reduction efficiency. The purpose of this study was to determine the basic data for the urea-SCR system to maximize the $NO_X$ reduction efficiency by understanding the $NO_X$ reduction characteristics in a real passenger vehicle to comply with the post EURO-6 emission regulation.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.549-559
• /
• 2014

The increasing demand of maritime transportation and port development especially due to increased international trade resulted in a strengthening of regulating the greenhouse gas emissions mainly from ships by International Maritime Organization (IMO). Responding to these international environmental regulation and enforcement, the United States and the European seaports have expanded their Green Port Policy, which can promote the public welfare by reducing pollution caused by ships and ports. Accordingly, in 2010, Korean government enacted "The Framework Act on Low Carbon, Green Growth" and had pushed for all Korean ports to establish and implement their own green port policies. Therefore, the objective of this study is to establish the Green Port Policy Plan for sustainable and environmental friendly operations and developments of Ulsan port, which plans to be the oil hub port of Northeast Asia. To this end, we studied the current status of the environmental policy issues in Ulsan Port and international-&-domestic case studies on establishment of green port policy. With these studies, Ulsan green policy alternatives were identified that through the experts advice, and then were prioritized by adopting AHP survey analysis. As the result of this study, it was notified that LED lights replacement and AMP establishment as the hardware policy and the port environmental management department as the software policy were equally important policy options for the implementation of sustainable Ulsan Green Port Policy to meet port's characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.476-482
• /
• 2019

Regulatory protocols such as the Convention on Climate Change and the regulation of greenhouse gas emissions act as catalysts for the development of high-efficiency energy equipment and the efficient use of energy. Among the fields where energy consumption is high, the electric heating equipment is not efficient. The electric boiler mainly uses a method of circulating water by contacting the heater. When the existing electric boiler is used, the water minerals are contacted with the high-temperature heater to be carbonized and adsorbed, thereby promoting the corrosion of the heater and lowering the efficiency of the heater. For this reason, an electric induction boiler, which has high energy efficiency and is applied to an induction heating system that can uniformly heat the object to be heated rather than conduction or convection heating, is in the limelight. This method induces a boiler pipe And it is recognized as an alternative that can solve the problem that occurs when heating is performed by direct heating. Despite the fact that research on induction heating has been conducted for a relatively long period of time, there have been few studies on the electrothermal technology using induction heating. Therefore, in this paper, to improve the heat efficiency of electric induction boiler, the influence of the cross sectional area, number of windings and winding layers is analyzed by finite element method through parametric study method. The method of finding the design point which maximizes the total loss is proposed by the alternating winding design method which can maximize the heat generation by analyzing copper and iron losses.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.117-124
• /
• 2022

The International Maritime Organization (IMO) is tightening environmental regulations in the shipping sector to reduce air pollutants such as greenhouse gases emitted from ships. Meanwhile, the paradigm of the shipbuilding and shipping industries is shifting toward eco-friendly and high-efficiency ships worldwide. The Republic of Korea is also promoting a policy to expand the supply of eco-friendly ships from 2020 to disseminate them. In this article, a survey was conducted with 12 experts on the government's eco-friendly ship supply policy, and the priority of the policy was evaluated using the analytic hierarchy process (AHP). As a result of the comprehensive evaluation of the priorities for six priority tasks, "Securing the world's leading technology for future eco-friendly ships" for the development of carbon-free and low carbon ships was the highest. This study, which analyzed the importance of eco-friendly ship policies through AHP analysis, can be used as data to preemptively respond to international marine environmental regulations and to improve policy execution efficiency such as budget allocation and policy development regarding protecting national shipping and shipbuilding industries.

• Journal of Korea Port Economic Association
• /
• v.39 no.2
• /
• pp.41-57
• /
• 2023

The drybulk shipping market has high freight rate volatility in the chartering market and various and complex factors affecting the market. In the unstable economic situation caused by the COVID-19 pandemic in 2020, the BDI plunged due to a decrease in trade volume, but turned from the end of 2020 and maintained a booming period until the end of 2022. The main reason for the market change is the decrease in the available fleet that can actually be operated for cargo transport due to port congestion by the COVID-19 pandemic, regardless of the fleet and trade volume volatility that have affected the drybulk shipping market in the past. A decrease in the actual usable fleet due to vessel waiting at port by congestion led to freight increase, and the freight increase in charting market led to an increase in second-hand ship and new-building ship price in long-term equilibrium relationship. In the past, the drybulk shipping market was determined by the volatility of fleet and trade volume. but, in the future, available fleet volume volatility by pandemics, environmental regulations and climate will be the important factors affecting BDI. To response to the IMO carbon emission reduction in 2023, it is expected that ship speed will be slowed down and more ships are expected to be needed to transport the same trade volume. This slowdown is expected to have an impact on drybulk shipping market, such as a increase in freight and second-hand ship and new-building ship price due to a decrease in available fleet volume.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.10
• /
• pp.671-677
• /
• 2012

In this study, the characteristics of emulsified fuel and engine emissions were studied with an engine dynamometer. In the results of physical property analysis, the margin of error of net calorific value and gross calorific value was ${\pm}0.5%$, were almost same theoretical calculation and results of physical property analysis test. In emulsified fuel, density and viscosity increased with increasing water contents. Emulsified fuel which is composed of water and Bunker-A was manufactured by using homogenizer and ultrasonic generator in $80^{\circ}C$. Phase separation did not take place in $20^{\circ}C$ and $50^{\circ}C$. In the results of engine dynamometer test, NOx concentration and smoke density were reduced with increasing water contents in using emulsified fuel. Total NOx could be reduced by about 41%, 10%, 32% and 28% at 1,000 rpm, 1,200 rpm, 1,500 rpm and 2,500 rpm respectively. Total smoke density was reduced to 42%, 65%, 70%, 62%, and 82% at 1,000 rpm, 1,200 rpm, 1,500 rpm, 2,000 rpm, and 2,500 rpm respectively.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.131-144
• /
• 2016

Damage occur frequently around the world on climate change and the main cause of greenhouse gas emissions regulation is growing. To this end, the government has built integrated management system for national building energy. The building energy information is total 6.8 million complex. Integrated management system for national building energy database are matched building registers information and energy information of the supply agencies. However, the matching process has its limitations so advanced work is in progress continuously. This study analyzed integrated management system for national building energy database quality and limitations and deduce improvement plan to increase system reliability and availability. The existing database matching average rate is 85.6%. 58.2% of the total non-matching data type has no building information. To ensure the ease of new database matching and the accuracy of the existing database matching, address standarization and building properties system are needed between building information and energy information. Also, The system construction is required to include information on other energy sources like petroleum energy which has high proportion of non-urban areas and small residential areas and renewable energy which has high potential in development and utilization.

• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.395-400
• /
• 2011

This study has been carried out in order to effectively manage three groups of unregulated hazardous organic substances (PCDD/DFs, PAHs, PCBs) in South Korea. The investigated substances have been analyzed according to the test methods for hazardous substances in specified wastes provided by the National Institute of Environmental Research, Korea. Total contents of the organic compounds have been determined for hazardous wastes from three major industrial categories (paint, iron removal, steelmaking), such as waste organic solvent, waste paint or dust. By investigating the waste samples for 7 PAHs using GC/MSD, Naphthalene has been detected (N.D~1631.33 mg/kg). The highest Naphthalene concentration, which exceeded the korean marine dumping waste standard, was found in waste organic solvents and waste paints. Although a content analysis of 7 PCB isomers has been conducted, none of these compounds was detected. The analysis of PCDD/DFs has revealed that all samples meet the criterion for low POP content defined in the technical guidelines developed under the Basel Convention. The PCDD/DFs content in dust samples deriving from 10 manufacturing processes (billet, bloom) was determined to be in the range of N.D~5.66 ng I-TEQ/g waste.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.549-557
• /
• 2017

Numerical studies have been carried out on scrubbers, which are after-treatment devices to satisfy strengthened emission regulations for sulfur dioxide and particulate matter. We investigated the problems with existing scrubbers through numerical analysis and designed and analyzed a new swirl-type scrubber that could solve these problems. As a result, with the swirl-type scrubber, exhaust gas formed a vortex in the lower part of the device, and some of this gas was released along the guide vane through the bottom surface. In this case, the pressure gradient in the vertical direction was not large, but a pressure difference between the inside and outside of the baffle was generated. The shape of the exhaust gas stream was investigated, and when water was not sprayed, the exhaust gas flowed constantly to the outlet along the guide vane, in contrast to when water was sprayed. It was confirmed that the shape of the flow was influenced by the guide vane, nozzle arrangement and water pressure. In the case of the swirl-type scrubber, impact on engine back-pressure was minimal, because differential pressure at the inlet and outlet was less than half of that with a conventional scrubber.

• Journal of the Economic Geographical Society of Korea
• /
• v.13 no.3
• /
• pp.398-415
• /
• 2010

The purpose of this paper is to grasp levels of cost burden in pollution treatment by measuring efficiencies and shadow prices by pollutants in Korean cities. The efficiencies and shadow prices of pollutants will be compared for cities divided by Seoul metropolitan area and non-Seoul metropolitan area. Annual shadow prices of NOx, SOx, and PM10 emissions in the cities of Seoul metropolitan area are 0.846, 0.318, 0.816, respectively for 1999-2005. The annual shadow prices in the cities of Non-Seoul metropolitan area are 0.848, 0.272, and 0.789, respectively over the same periods. The shadow prices of SOx showed similar levels between two areas but those of NOx and PM10 of cities in Seoul metropolitan area were higher. NOx emission quantities of both areas have similar increasing patterns because the NOx has mainly increased with augmentation of transportation regardless of Seoul metropolitan and non-Seoul metropolitan areas. It seems that the reason the shadow prices of two pollutants for the cities of Seoul metropolitan area are higher, is because environmental regulation is stronger in the cities of Seoul metropolitan area, the cities of Seoul metropolitan relatively show higher quantities of pollution reduction under given desirable outputs, and generally have industrial sectors with small pollution emission. In the future we need to reduce pollutants in the various respects such as adjustment of overall industry structure, energy consumption pattern, and reviews of arrangement of living space for the cities located on the downward-sloping segment of production frontier.