DOI QR코드

DOI QR Code

Experimental Study on Characteristics of NOX Reduction with Urea-Selective Catalytic Reduction System in Diesel Passenger Vehicle

승용 디젤차량에서 Urea-SCR 시스템의 NOX 저감 특성에 관한 실험적 연구

  • 박승원 (국민대학교 자동차공학과) ;
  • 이성욱 (국민대학교 자동차공학과) ;
  • 조용석 (국민대학교 자동차공학과) ;
  • 강연식 (국민대학교 자동차공학과)
  • Received : 2016.10.11
  • Accepted : 2017.01.16
  • Published : 2017.04.01

Abstract

$NO_X$ reducing technique such as LNT, LNC, and selective catalytic reduction (SCR) have been developed and applied, especially on heavy-duty vehicles. However, it is expected that $NO_X$ reduction techniques will also be applied to diesel passenger vehicles. The urea-SCR system is receiving attention as the most effective $NO_X$ reduction technology without a fuel penalty. Thus, many advanced countries are developing this technology. The urea-SCR system sprays an aqueous urea solution that separates $NO_X$ into $N_2$ and $H_2O$, which are harmless and emitted into the atmosphere. The urea injected in front of the SCR catalyst should be changed to 100% $NH_3$, which is required for $NO_X$ reduction in the SCR system to maximize the reduction efficiency. The purpose of this study was to determine the basic data for the urea-SCR system to maximize the $NO_X$ reduction efficiency by understanding the $NO_X$ reduction characteristics in a real passenger vehicle to comply with the post EURO-6 emission regulation.

LNT(Lean $NO_X$ Trap), LNC(Lean $NO_X$ Catalyst), SCR(Selective Catalytic Reduction)과 같은 $NO_X$ 저감기술은 상용차뿐만이 아닌 승용차량 성능향상을 위해 지속적으로 개발이 진행되고 있다. 특히 Urea-SCR 시스템은 연료손실 없이 이론상 100%에 가깝게 $NO_X$를 저감하는 가장 효과적인 기술로 환원반응으로 배기가스를 $N_2$$H_2O$로 배출하기 위해 환원제인 요소수를 분사해야한다. 하지만 엔진에서와는 달리 실제차량에서의 적용은 SCR 효율이 떨어지게 된다. 따라서 실제차량에서의 SCR 효율을 극대화하는 기술 개발이 요구되고 있는 실정이다. 본 연구에서는, Post EURO-6 배기가스 규제에 대응하기 위한 디젤승용차량에서의 Urea-SCR의 $NO_X$ 저감 성능에 의한 저감효율의 극대화를 목적으로 실차용 Urea-SCR 시스템 위한 기초자료로 제시하고자 한다.

Keywords

References

  1. Han Y.-C. et al, 1998, "New edition of Internal Combustion Engine," pp. 170-203, 249-272.
  2. Park, S., 2016, "Worldwide RDE - NOX Investigation Status on Diesel Passenger Vehicles and Its Implication," KSAE Workshop.
  3. Baek, Y., Kim, J., Park, S., Lee, S., Cho, Y. and Kang, Y., 2015, "An Experimental Study on Characteristics of $NO_X$ reduction and $NH_3$ slip with Urea-SCR System in Passenger Diesel Engine," KSAE, pp. 303-308.
  4. Hong, K., Hwang, I. G., Myung, C.-L. and Park, S., 2009, "Investigation on the $DeNO_X$ Efficiency in Urea-SCR System at Various Operating Conditions and Injection Characteristics for a Passenger Diesel Engine," Trans. Korean Soc. Mech. Eng. B, Vol. 33, No. 12, pp. 952-960. https://doi.org/10.3795/KSME-B.2009.33.12.952
  5. Lim, J.-H., Yonn, Y.-B., Song, C.-S., Park, Y.-J., Lee, S.-W., Cho, Y.-S., Joo, J. G. and Kim, H., 2010, "A Numerical Analysis on Distribution of Reluctant with Mixer Application and Various Injection Method in Urea-SCR System," [J]. KSAE, pp. 419-424.
  6. "Emission Test Cycles: ECE 15 + EUDC / NEDC," dieselnet.com. July 2013. Retrieved 30 April 2015.
  7. Baek, Y., Kim, J., Park, S., Lee, S., Cho, Y. and Kang, Y., 2015, "An Experimental Study on Characteristics of $NO_X$ Reduction and $NH_3$ Slip with Urea-SCR System in Passenger Diesel Engine," KSAE, pp. 303-308.
  8. Song, M., Jeon, Y., Lee, S., Kang, Y. and Cho, Y., 2013, "A Numerical Study on the $NO_X$ Reduction Rate Depending on the Flow Uniformity Index of $NH_3$ in front of the Catalytic Converter," [J], ILASS-Asica.
  9. KO, S., Jeung, J.-H., Oh, K., Kim, H., Lee, C. and Lee, C., 2011, "A Study on the $NO_X$ Reduction Rate and Fluid Mixing Characteristics Depending on the Mixer Configurations in Urea-SCR System," [J], KSAE, pp. 615-620.
  10. Seo, J., Lee, S., Cho, Y. and Kang, Y., 2012, "A Study on Effect of $NO_X$ and $NH_3$ Emission Characteristics by Urea-SCR Model for Euro-6 Emission Regulation in Diesel Engine," [J], KSAE, pp. 479-485.
  11. Nishiyama, H., Tanaka, Y., Adachi, T., Kawamura, S. and Daisho, Y., 2015, "A Study on the Improvement of $NO_X$ Reduction Efficiency for a Urea SCR System," [J], SAE.