• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.240-247
• /
• 2006

This paper discusses the optical system design for projection TV using LCOS type micro display, which provides the high resolution, slim depth, and a large screen of more than 60 inches. We analyzed the relationship between the illumination system, projection lens, color separation & recombination system, and micro display. From this quantitative analysis, the starting data for the optimum light engine was defined, and all optical systems were designed by an optimization process. Three RGB panels were proposed for a high luminence system, and the four prisms symmetrically located make equal optical path lengths for the RGB rays. This color separation & recombination system enables the a compact illumination system. Also, in order to the slim light engine with high resolution, the folded projection lens system was designed by inserting a mirror between projection lenses.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.519-526
• /
• 2002

In this paper, a microstrip patch array antenna for a Doppler radar at 10.525GHz is desinged and fabricated. To be used for mobile radar system, the antenna is fabricated on a single layer laminate to resist a fire impact and is covered with the Teflon foam. To obtain the desired characteristics, the array antenna is designed 4$\times$8 array using a corporate 3-dB amplitude taper. Also, using square patch elements, the antenna can be converted to a circular polarized antenna later. The designed and fabricated array antenna has the reflection coefficient$({S_11})$ -53.498dB, the horizontal beam width of $10^{\circ}$, the vertical beam width of $18.8^{\circ}$, the gain of 21dBi, the bandwidth of 220MHz for VSWR<1.5 and a side lobe level of less than -17.5dB.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.237.2-237.2
• /
• 2015

본 연구에서는 포토레지스트 코팅과 전기도금 기술을 이용하여 3차원 갭을 가지는 전극을 제작하였다. 3차원 갭은 마이크로 전극이 배열된 하층과 벌크전극이 놓여진 상층으로 구성되었다. 갭의 크기는 하층 전극에 코팅된 포토레지스트의 두께와 하층 전극의 높이 차이로 결정되며, 코팅 두께가 다른 포토레지스트 ($3.5{\mu}m$, $1.25{\mu}m$)의 사용과 전기도금 기술을 병용하여 3차원 갭의 크기를 줄일 수 있다 (~150 nm). 제작한 3차원 갭 소자의 상 하층 전극에 각각 산화, 환원 전압을 인가함으로써, 유입된 ferricyanide의 redox cycling 을 유도 할 수 있음을 확인하였으며, 본 연구의 결과는 원자힘현미경 (AFM), 주사전자현미경 (SEM), 순환전압전류법 (CV) 및 시간대전류법 (CA)을 통해 분석 되었다.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.255-259
• /
• 1997

In this paper, the result of a performance study on a home-built spinning disk type confocal microscope is presented. The confocal microscope was fabricated with a Nipkow disk made of the made of the microfilm. The throughput of the disk was 0.5%, allowing the observation of specimen with higher reflectivities only. A laser diode at 692.7nm was used as the light source. The topographic structures of a PC ROM and the CD ROM were observed with sufficient reliability, while the effect of the convolution of the beam size with the finite object size was found dominant. Also the shadowing effect by the etched pattern was observed.

• Journal of Aerospace System Engineering
• /
• v.9 no.2
• /
• pp.13-18
• /
• 2015

Micro planar type liquid propellant thruster was fabricated by MEMS manufacturing process for micro/nano satellites applications. 90 wt.% hydrogen peroxide was used as propellant and for propellant decomposition, Pt/Al2O3 was used as catalyst. Micro thruster structure was made by 5 photosensitive glasses patterned with thruster component profiles. Objective thrust was 50 mN and required hydrogen peroxide mass flow was 2.1 ml/min, which was supplied by syringe pump and teflon tube in experimental test. Performance test said that average steady thrust was approximately 30 mN, around 60% of objective thrust, and transient time was about 5 sec. It is estimated that extended response time was due to high thermal energy loss of micro scale thruster and low enthalpy input by propellant mass flow.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.803-808
• /
• 2011

In this study, $1{\times}2$ microstrip patch array antenna of 5.150 - 5.350GHz for wireless LAN was investigated and analyzed after optimizing the antenna parameters. From the measurement result, we obtained that the center frequency of the antenna is 5.214GHz and -41.17dB of the insertion loss, and 258MHz of bandwidth. The fabricated antenna has VSWR value of 1.1 and impedance value of $49.724{\Omega}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.2
• /
• pp.182-191
• /
• 1988

A log periodic microstrip array antenna using direct coupling feeder is designed at the frequency 7.2-12.4GHz. Transmission line analysis method was used for the design of each antenna element in consideration of the effects of dielectric and conductor loss and the discontinuity, also the optimized feeding points were obtained for the impedance matching between a main transmission line and each antenna element. It is shown that the measured VSWR was less that 2.4 at the frequency 7.2-12.4GHz, and 53% bandwidth was achived.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.8
• /
• pp.682-688
• /
• 2009

A periodic away of zinc oxide(ZnO) micro-rods as fabricated by using chemical bath deposition and photo-lithography. Vertically aligned ZnO micro-rods array was successfully grown by chemical bath deposition method on ZnO seed layer. The ZnO seed layer was deposited on glass and the patterning was made by standard photo-lithography technique. The selective growth of ZnO micro-rods as achieved with the masked ZnO seed layer. The fabricated ZnO micro rods were found to be single crystalline and have grown along hexagonal c-axis direction of (0002) which is same as the preferred growth orientation of ZnO seed layer.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.364-371
• /
• 1994

Real-time MTF measuring system for testing microlens arrays with a linear CCD array is developed. The spread function of slit image that is relayed and magnified by a microscopic object lens can be measured at several times in a second. The signal uniformity and MTF of CCD is also calibrated. The experimental result of micro lens arrays developed for contact image sensor is presented.sented.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.154-155
• /
• 2014

본 논문에서는 TV 시청환경에서의 실내소음의 스트레스 평가를 위한 소음 데이터베이스(database, DB) 설계 방법을 제안한다. 제안된 DB 는 TV 시청공간을 포함하는 실제 주거환경 내에서 binaural recording을 위한 1 개의 dummy head 와 multi-channel recording 을 위한 2 개의 다채널 마이크 배열을 활용하여 TV 콘텐츠 및 실내소음의 음향 정보를 취득한다. 설계된 DB는 TV 시청자의 청각정보에 해당하는 binaural recording 신호와 실내소음의 위치 및 종류 추정을 위한 multi-channel recording 신호를 모두 포함하기 때문에 TV 시청환경에서 실내소음이 시청자에게 유발하는 스트레스의 분석 및 평가 관련 연구에 적합하게 설계되었다. 본 DB 는 5 가지 종류의 TV 콘텐츠 10 시간 분량, 30 가지 종류의 실내소음 2 시간 분량으로 구성되었다.