• Journal of the Korean Society of Marine Environment & Safety
• /
• 제28권4호
• /
• pp.601-609
• /
• 2022

Jack-up drilling rigs are mobile offshore platforms widely used in the offshore oil and gas exploration industry. These are independent, three-legged, self-elevating units with a cantilevered drilling facility for drilling and production. A typical jack-up rig includes a triangular hull, a tower derrick, a cantilever, a jackcase, living quarters and legs which comprise three-chord, open-truss, X-braced structure with a spudcan. Generally, jack-up rigs can only operate in water depths ranging from 130m to 170m. Recently, there has been an increasing demand for jack-up rigs for operating at deeper water levels and harsher environmental conditions such as waves, currents and wind loads. All static and dynamic loads are supported through legs in the jack-up mode. The most important issue by society is to secure the safety of the leg structure against collision that causes large instantaneous impact energy. In this study, nonlinear FE -analysis and verification of the requirement against collision for 35MJ recommended by DNV was performed using LS-Dyna software. The colliding ship used a 7,500ton of shore supply vessel, and five scenarios of collisions were selected. From the results, all conditions do not satisfy the class requirement of 35MJ. The loading conditions associated with chord collision are reasonable collision energy of 15M and brace collisions are 6MJ. Therefore, it can be confirmed that the identical collision criteria by DNV need to be modified based on collision scenarios and colliding members.

• Therapeutic Science for Rehabilitation
• /
• 제12권3호
• /
• pp.61-77
• /
• 2023

Objective : This study analyzed the correlation between cognitive function and oral health-related quality of life (OHQoL). Methods : Demographic and clinical characteristics were extracted and utilized for subjects aged 45 years or older who participated in the 8th Korean Longitudinal Study on Aging in 2020. The dependent variable was the Geriatric Oral Health Assessment Index, and the independent variable was the level of cognitive function classified by the Mini-Mental State Examination scores. The analysis method used inverse probability of treatment weighting (IPTW). Then, the association between cognitive function and OHQoL was analyzed by multiple regression analysis. Results : Among the participants, 4,367 (71.40%) had normal cognition, 1,155 (18.89%) had moderate cognitive impairment, and 594 (9.71%) had severe cognitive impairment. As a result of analysis by applying IPTW, there was a negative correlation between the cognitive function group and OHQoL (normal vs. moderate: β = -2.534, p < .0001; normal vs. severe: β = -2.452, p < .0001). Conclusion : After propensity score matching, mild cognitive impairment showed a more negative association than severe cognitive impairment. Therefore, patients with cognitive impairment require oral health management education to improve OHQoL regardless of the level of cognitive impairment.

• Journal of the Korean Geotechnical Society
• /
• 제23권5호
• /
• pp.143-151
• /
• 2007

The factors affecting the geotechnical properties of cemented sands are known to be relative density, cementation level, stress level, and particle characteristics such as particle size, shape and surface conditions. It has been widely accepted that the friction angle of cemented sands is not affected by cementation while the cohesion of cemented sands was significantly influenced by cementation. The cementation that is a critical component of the strength of cemented sands will be broken with increasing confining pressure and great caution is required in evaluating the cohesion of cemented specimens due to their fragilities. In this study, a series of drained shear tests were performed with specimens at various cementation levels and confining stresses to evaluate the strength parameters of cemented sands. From the experiments, it was concluded that the cohesion intercept of cemented sand experiences three distinctive zone(cementation control zone, transition zone, and stress control zone), as the cementation level and the confining stress varies. In addition, for accurate evaluation of the strength parameters, the level of confining stress triggering the breakage of cementation bond should be determined. In this study, the relationship between the maximum confining stresses capable of maintaining the cementation bond intact and unconfined compression strength of the cemented sand was established.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.269-269
• /
• 2022

최근 낙동강 하구 기수생태 복원에 있어서 중요한 요소 중 하나는 하굿둑 외해측의 보다 높은 정도를 가지는 조석예보치 산정과 이를 통해 하굿둑 방류량과 해수 유입량을 추정하여 주변 환경 등을 예측할 수 있다. 기수생태 복원이 본격으로 논의가 진행 전인 2016년까지는 하구에서 수km 떨어진 기존 조위관측소(부산 및 가덕도)를 활용하여 하류수위를 예측하여 왔지만 조위 높이와 위상 차이로 인하여 활용이 용이하지 않다. 따라서, 낙동강 하굿둑 인접 외해역에서 조석 영향을 받는 수위관측치를 이용하여 조석조화분해를 통해 조위 예측을 보다 정밀하게 산정하는 것이 필요하다. 연구방법으로는 낙동강 하굿둑 외해역에서 관측된 2016년, 2017년 각각 1년간 10분간격으로 관측자료의 저장상태 및 이상자료 유무를 확인하고, 조석조화분해 프로그램인 TASK2000(Tidal Analysis Software Kit) Package를 이용하여 2016년, 2017년 낙동강 하굿둑 인접 외해역에서 관측된 조위자료를 각각 조석조화분해한 결과로 관측조위와 예측조위 비교하였고, 관측조위와 예측조위를 뺀 성분인 조석잔차성분을 구했다. 조화분해결과, 낙동강 하굿둑 외해역은 일반적인 연안역의 조석과는 달리 하천수의 유출, 배수갑문의 조작, 연안사주지형에 의한 조석변형 등 매우 복잡하고 불규칙적인 특성인 기상성분(기압, 바람 등)에 의한 교란을 고려한다면 예측정확도가 상당부분 확보되는 것으로 나타났다. 또한 장주기 성분과 비선형 조석성분의 크기를 비교해 볼 때 거의 편차가 없이 나타나 조석조화상수를 이용한 예보 가능성을 확인할 수 있었다. 조위검증은 2016년의 1년치의 조석자료를 이용하여 조화분해된 조화상수 63개를 이용하여 2017년의 조석 예보치를 산정하였으며, 이를 2017년의 낙동강 하굿둑 외해역의 조석관측치와 조석예측치를 1대 1 비교하는 방식으로 검증하였고, 이들의 상관관계를 파악하기 위하여 두 성분에 대하여 Regression Analysis를 수행하여 예측조위와 관측조위 사이에는 Pre=0.9535×Obs+0.396과 같은 관계식이 성립하는 것으로 분석되었다. 또한, 두 성분간의 상관도는 0.9535로 높게 나타났다. 조위예측 프로그램인 TASK2000 Package 중 MARIE를 이용한 조위예측 프로그램의 신뢰도가 매우 높은 것으로 판단되고, 해당년도 조위예측 시에는 가능하면 직전년도의 1년 조석관측자료를 조화분해하고 얻어진 조화상수를 이용하여 조위예측을 실시하면 보다 정확한 자료를 얻을 수 있다.

• The Journal of the Convergence on Culture Technology
• /
• 제10권4호
• /
• pp.563-574
• /
• 2024

While the integration of chatbot and the simplification of financial terminology in Financial services' apps are increasingly common, automotive finance apps often show lower user satisfaction for complex terminol- ogy and rigid content. This study investigates the effects of chatbot interaction modes and the simplification of financial terminology on user experience in automotive finance apps. We developed prototypes for car lease tasks under different conditions: the type of user interaction channel (chatbot vs menu-based), and the usage of financial terminology. A 2 x 2 experimental survey was conducted to measure perceptions of friendliness, read- ability, trust, and accuracy. The findings revealed that chatbot interactions significantly enhance friendliness more than menu-based interactions, and simplifying terminology significantly improves readability and friendliness. However, no significant differences were observed in trust and accuracy between the conditions. Furthermore, nosignificant interaction effects were found between the two conditions across all variables. This study contributes by quantitatively assessing the impacts of chatbot consultation modes and terminology sim- plification on customer experience in financial services.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제23권4호
• /
• pp.37-53
• /
• 2024

This study selected bicycle road hazard detection factors for mobile IoT sensor device operation and developed service application plans. Twelve bicycle road hazard detection factors were derived through a focused group interview, and a fuzzy AHP-based importance analysis was conducted on 30 road and transportation experts. As a result, 'damage to pavement' (1st overall) and 'environmental obstacle' (2nd) with low visibility but a high risk of accidents were selected the most. The factors in terms of facility management, such as 'disconnected route occurrence' (4th), 'artificial obstacle' (5th), 'effective width' (6th), and 'poor drainage' (7th), were selected as the upper and middle areas. Factors that are not direct accident-inducing factors, such as 'loss of road markings' (11th) and 'free space width' (12th), were selected the least. Based on this, a plan was presented to apply the bicycle road hazard detection service and a service operation strategy according to real-time performance. Nevertheless, follow-up studies, such as human behavioral analysis based on bicycle operators, analysis according to the bicycle road type, service demonstration, and pilot operation, will be needed to develop safe bicycle road management is expected.

• Korean Journal of Weed Science
• /
• 제17권1호
• /
• pp.31-43
• /
• 1997

This study was carried out to investigate classfication of weedy rice (Oryza sativa) based on isozymes esterase and peroxidase, growth and developmental difference of weedy rices and rices grown under dry and water condition, and weedy rice control and tolerant difference of weedy rices in various herbicides using weedy rices collected from thirteen strains of Chonnam, one Chonbuk, two Kyeongki and two rice cultivars. 1. The collected weedy rices were classified into three groups based on isozyme esterase and peroxidase using polyacrylamide gel electrophoresis(PAGE) method. The classified groups were not same each other. 2. Plant height was taller in collected weedy rices than rice cultivars at 18 days after seeding under dry and water conditions, but number of leaves, shoot fresh weight, root fresh weight and root length were not significantly different between collected weedy rices and rice cultivars. In addition, growths of collected weedy rices were greater in dry- than water-condition. 3. After thiobencarb(S-4-chlorobenzyl diethythiocarbamate), molinate(S-ethyl hexahydro-1H-azepine-1-carbothioate) and oxadiazon(5-tert-butyl-3(2,4-dichloro-5-isopropoxyphenyl)-1,3,4-oxadiazol-2-one) were applied at 6 days before seeding, the weedy rices controlled 100% by thiobencarb at 2.1kg ai/ha and 024kg ai/ha oxadiazon treatment but controlled 26% to 67% by molinate at 6.5kg ai/ha. Rice due to the herbicides was injured severely(25% to 100%) in flood condition at time of rice seeding after oxadiazon at 0.48kg ai/ha and 2.1kg ai/ha thiobencarb application, except for molinate which injured rice slightly(4% to 13%) in drain condition. The collected weedy rices to all experimented herbicides showed slight intraspecific variations. The intraspecific variations of weedy rices decreased in the order of thiobencarb>molinate>oxadiazon.

• Journal of Bio-Environment Control
• /
• 제18권3호
• /
• pp.238-243
• /
• 2009

To investigate the characteristics of moisture content (MC), moisture distribution and starting point of drainage in a rockwool slab culture, time domain reflectometry (TDR) sensors were used in a drip irrigation system. MC values ($0{\sim}100%$) measured by TDR sensors in a slab were compared to those by loadcells. Seventy two seedlings of paprika (Capsicum annuum L.) were cultured for $5{\sim}6$ months in a green-house and the starting point of irrigation was determined by the average value of three TDR sensors which were inserted diagonally across the slabs under the plants. MCs as a standard for starting point of irrigation by TDR were determined with 40%, 50%, and 60%. Distribution of MCs in a slab measured with five TDR sensors equally spaced from two irrigation points were not much different when the MC in the slab increased from zero to saturation point. The saturated MCs in the slab were presented at $58{\sim}65%$ and the drain was started when the MC became around $50{\sim}55%$. At the saturated MC in the slab, TDR sensors presented 100% but the values from the loadcell showed 90% at the same time. However, measurement errors between two methods for MC remarkably decreased with a decrease in the MC in a slab. Especially when the MC was maintaining below 60%, the errors between TDR and loadcell methods for measuring MC in the rock-wool slab were less than 5%. There were no significant differences in number of fruits and fresh and dry weights of fruits when they were cultured under the different MC conditions with three irrigation regimes (40%, 50%, and 60%). These results indicated that the MC control by TDR sensors in a rock-wool based paprika culture can be suggested as a method to determine the starting point of irrigation for a soilless culture system.

• Korean Journal of Acupuncture
• /
• 제30권4호
• /
• pp.252-263
• /
• 2013

Objectives : Skin color deformation by cupping has been widely used as a diagnostic parameter in Traditional Korean Medicine(TKM). Skin color deformation such as ecchymoses and purpura is induced by local vacuum in a suction cup. Since existing studies have relied on a visual diagnostic method, there is a need to use the quantitative measurement method. Methods : We conducted an analysis of cross-polarization photographic images to assess the changes in skin color deformation. The skin color variation was analyzed using $L^*a^*b^*$ space and the skin erythema index(E.I.). The meridian theory in TKM indicates that the condition of primary internal organs is closely related to the skin color deformation at special acupoints. Before conducting these studies, it is necessary to evaluate whether or not skin color deformation is influenced by muscle condition. Hence, we applied cupping at BL13, BL15, BL18, BL20 and BL23 at Bladder Meridian(BL) and measured blood lactate at every acupoint. Results : We confirmed the high system measurement accuracy, and observed the diverse skin color deformations. Moreover, we confirmed that the $L^*$, $a^*$ and E.I. had not changed after 40 minutes(p>0.05). The distribution of blood lactate levels at each part was observed differently. Blood lactate level and skin color deformation at each part was independent of each other. Conclusions : The negative pressure produced by the suction cup induces a reduction in the volumetric fraction of melanosomes and subsequent reduction in epidermal thickness. The relationship between variations of tissue and skin properties and skin color deformation degree must be investigated prior to considering the relationship between internal organ dysfunction and skin color deformation.

• Asian Journal of Turfgrass Science
• /
• 제18권3호
• /
• pp.149-163
• /
• 2004

Physical and chemical properties of root zone mixes and methods of green construction are important considerations for improving turf grass quality for putting greens. This study compared Penncross creeping bentgrass (Agrostis palustris Huds.) performance as affected by three root zone construction systems with three amendments (sand, peat, and zeolite). The objective of this study was to determine if an amended California construction system would improve green performance during establishment (1998-1999) and maturation (2000-2001). Three treatments were tested: California ($100\%$ sand), USGA($90\%$ sand and $10\%$ peat, v/v), and California-Z ($85\%$ sand and $15\%$ zeolite, v/v). Treatments were arranged in a randomized complete block with four replicates. Physical and chemical properties of the root zone and bentgrass performance were compared for the treatments. The California-Z treatment had the highest saturated hydraulic conductivity, field infiltration rate and the lowest bulk density. It also had the highest cation exchange capacity and plant available nutrient concentrations among the three treatments. The California-Z treatment produced bentgrass quality and color during green establishment and maturation that were equal to or higher than the California treatment, and consistently higher than the USGA treatment. The addition of an inorganic amendment to the California system improved physical and chemical properties of the root zone and improved quality and color of bentgrass during green establishment. During green maturation, creeping bentgrass in the California-Z treatment was equal (6 of 15 sampling dates) or $20\%$ higher (9 of 15 dates) in quality compared to the California system.