• 제목/요약/키워드: 배소

검색결과 204건 처리시간 0.036초

알루미늄 페드로스 재활용 파일롯트플랜트 시운전 결과 (Test Run of the Pilot Plant for Recycling of the Waste Aluminum Dross)

  • 박형규;이후인;최영윤
    • 자원리싸이클링
    • /
    • 제14권4호
    • /
    • pp.41-46
    • /
    • 2005
  • 알루미늄 폐드로스는 알루미늄 용해 시에 발생되는 주요 폐기물로서 주요 성분은 알루미늄이며 또한 상당량의 금속 알루미늄이 잔류한다. 본 연구에서는 국내 재생 알루미늄업체에서 발생된 알루미늄 폐드로스를 수산화나트륨 용액으로 침출하여 폐드로스 중의 잔류 알루미늄을 용액 상으로 침출, 분리시키고, 침출용액 중에서 알루미늄 성분을 수산화알루미늄으로 회수하였으며 침출 여과 시에 발생된 폐드로스 잔사는 수세, 건조, 배소 과정을 거쳐 알루미나질 세라믹 원료로 재활용하였다. 또한, 1일 4톤의 알루미늄 폐드로스를 처리할 수 있는 규모의 파일롯트 플랜트를 건설하였으며, 시운전을 통하여 개발기술의 재현성을 확인함으로써 연구결과의 상용화 가능성을 제시하였다.

실리콘 웨이퍼 연마에서의 Break-in 모니터링 (Monitoring of Break-in time in Si wafer polishing)

  • 정석훈;박범영;박성민;이상직;이현섭;정해도;배소익;최은석;백경록
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.360-361
    • /
    • 2005
  • Rapid progress in IC fabrication technology has strong demand in polishing of silicon wafer to meet the tight specification of nanotopography and surface roughness. One of the important issues in Si CMP is the stabilization of polishing pad. If a polishing pad is not stabilized before main Si wafer polishing process, good polishing result can not be expected. Therefore, new pad must be subjected into break-in process using dummy wafers for a certain period of time to enhance its performance. After the break-in process, the main Si wafer polishing process must be performed. In this study, the characteristics of break-in process were investigated in Si wafer polishing. Viscoelastic behavior, temperature variation of pad and friction were measured to evaluate the break-in phenomenon. Also, it is found that the characteristic of the break-in seems to be related to viscoelastic behavior of pad.

  • PDF

산삼약침 시술 후 발생한 것으로 의심되는 약인성 간손상 : 증례 보고 (Case of Suspected Drug-Induced Liver Injury after Intravenous Wild Ginseng Pharmacopuncture)

  • 조희근;정필선;김희영;배소연;조미진;신준혁;한세혁;나재일;설재욱;이상영
    • 동의생리병리학회지
    • /
    • 제28권1호
    • /
    • pp.102-106
    • /
    • 2014
  • Wild ginseng pharmacopuncture is a partly used Traditional Korean Medicine's therapy with no previously well documented hepatotoxicity. We report the the first case of suspected drug-induced liver injury (DILI) after intravenous Wild ginseng Pharmacopuncture therapy. Our clinical observation based on patient's laboratory studies, medical history, detailed drug history and ruling out other possible causes. Our patient's suspected diagnosis was wild ginseng pharmacopuncture-induced liver injury with correlation between detailed drug history and laboratory studies. This diagnosis was supported by the Council for International Organizations of Medical Sciences-Roussel Uclaf Causality Assessment Method(RUCAM). This report represents the first documented cases of suspected DILI after intravenous wild ginseng pharmacopuncture therapy, highlighting the need for future research regarding potential hepatotoxicity of Wild ginseng Pharmacopuncture.

다결정 실리콘 태양전지용 웨이퍼의 물성과 태양전지 발전효율 상관관계 연구

  • 이명복;송규호;류한희;이형민;배소익
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.382-382
    • /
    • 2011
  • 보다 저렴한 다결정 실리콘 웨이퍼를 사용한 다결정 실리콘 태양전지의 발전효율개선을 위해서는 태양광스펙트럼의 표면 흡수기구를 최적화하고, 전자-정공쌍의 생성극대화 및 재결합 기구 제어를 통한 전하운바자들의 안정적인 분리와 전극으로의 효율적인 수집이 필수적인다. 현재 양질의 다결정 실리콘 웨이퍼에 기반한 다결정 실리콘 태양전지 양산공정에서 16~17% 발전효율이 이루어지고 있으며 18% 이상의 발전효율을 얻기 위해서는 보다 더 우수한 품질의 다결정 실리콘 웨이퍼가 요구된다. 본 연구에서는 15.5~16.5% 대역의 평균 발전효율을 갖는 15.6 cm${\times}$15.6 cm 크기 고효율 다결정 실리콘 태양전지 전면의 전자발광(EL : electroluminescence)데이터로부터 효율기여도가 높은 위치와 상대적으로 기여도가 낮은 위치들을 선정하여 380~1050nm 파장대역의 광선속에 대해 국부적인 외부양자효율(EQE : external quantum efficiency)을 측정하고 투과전자현미경(TEM : tunneling electron microscope) 등을 활용하여 결정방향 등에 기인하는 양자효율 악화기구를 분석하였다. 결론적으로 15%대의 상대적으로 낮은 발전효율을 보이는 태양전지들은 300~600 nm 단파장 영역에서 양자효율이 상대적으로 낮은 저급한 결정성의 웨이퍼에 기인하고 16.5%이상의 높은 발전효율을 갖는 태양전지들은 단파장영역에서 높은 양자효율을 갖는 영역이 수광면적의 80~90%를 차지하는 것으로 밝혀졌다. 이와 더불어 15%대의 발전효율을 갖는 태양전지에서는 600~1100 nm 파장대역에서 상대적으로 악화된 양자효율을 갖는 저급한 결정성 영역이 30~40%를 차지하였으나 16.5%대역의 고효율 태양전지에서는 저급한 결정성 영역이 5~10%를 차지하여 대조를 보였다. 따라서 18%이상의 높은 발전효율을 갖는 다결정 실리콘 태양전지의 양산을 위해서는 양자효율이 우수한 양품의 웨이퍼를 기반으로 표면 texturing을 통해 평균 태양광 흡수율을 90%이상으로 개선하고, 보다 미세한 프론트 전극패턴을 통해 수광면적을 개선하고 선택적인 에미티공정 기술 등을 적용할 필요가 있음을 제안하고자 한다.

  • PDF

초등 1학년 발달성 난독 아동의 낱말 해독, 음운인식, 빠른 이름대기, 자소 지식 (Korean first graders' word decoding skills, phonological awareness, rapid automatized naming, and letter knowledge with/without developmental dyslexia)

  • 양유나;배소영
    • 말소리와 음성과학
    • /
    • 제10권2호
    • /
    • pp.51-60
    • /
    • 2018
  • This study aims to compare the word decoding skills, phonological awareness (PA), rapid automatized naming (RAN) skills, and letter knowledge of first graders with developmental dyslexia (DD) and those who were typically developing (TD). Eighteen children with DD and eighteen TD children, matched by nonverbal intelligence and discourse ability, participated in the study. Word decoding of Korean language-based reading assessment(Pae et al., 2015) was conducted. Phoneme-grapheme correspondent words were analyzed according to whether the word has meaning, whether the syllable has a final consonant, and the position of the grapheme in the syllable. Letter knowledge asked about the names and sounds of 12 consonants and 6 vowels. The children's PA of word, syllable, body-coda, and phoneme blending was tested. Object and letter RAN was measured in seconds. The decoding difficulty of non-words was more noticeable in the DD group than in the TD one. The TD children read the syllable initial and syllable final position with 99% correctness. Children with DD read with 80% and 82% correctness, respectively. In addition, the DD group had more difficulty in decoding words with two patchims when compared with the TD one. The DD group read only 57% of words with two patchims correctly, while the TD one read 91% correctly. There were significant differences in body-coda PA, phoneme level PA, letter RAN, object RAN, and letter-sound knowledge between the two groups. This study confirms the existence of Korean developmental dyslexics, and the urgent need for the inclusion of a Korean-specific phonics approach in the education system.

오징어 가공품의 냄새성분에 관한 연구 (Volatile Constituents of Processed Squid Product)

  • Chiaki Koiiumi;Toshiaki Ohshima;Lee, Eung-Ho
    • 한국식품영양과학회지
    • /
    • 제19권6호
    • /
    • pp.547-554
    • /
    • 1990
  • 오징어 가열향기의 전구물질부를 탐색하고, 연속증류장치로써 가열향기 성분을 추출한 후 중성, 염기성, 페놀성 및 산성구분으로 분획하여 GC 및 GC-MS로써 분석 동정하였다. 오징어 가열향기의 생성에는 80% 메탄올로서 추출되는 성분이 중요하였으며, 지질은 가열향기에 관여하지 않았다. 4가지 획분을 관능검사한 결과, 중성구분에서는 은은하면서 감미로운 냄새를, 염기성구분에 서는 탄매, 배소취 및 어취를 느낄 수 있었다. 오징어 가열향기로서 44성분이 동정 확인되었으며, 이들은 탄화수소 2종, pentanal, furfurylalcohol, hexanol, 2-phenylethanol 등 알데히드 5종, 케톤류 1종, 퓨란류 1종, dimethyl sulfide, dime-thyl-thiazole 등 함황화합물 3종. pyrazine류 7종, pyridine류 2종 및 아민류 1종 둥 10종의 함질소 화합물, 페놀류 2종, propionic acid, isopentanoic acid 및 n-hexanoic acid 등 10종의 지방산으로 구성되어 있었다.

  • PDF

온라인 커뮤니티에서 몰입이 만족에 미치는 영향에 관한 연구: 사회자본의 매개효과를 중심으로 (A Study on the Influence of Flow on Online Community Satisfaction: Focusing on the Mediating Role of Social Capital)

  • 여민선;배소영
    • 디지털융복합연구
    • /
    • 제14권9호
    • /
    • pp.171-179
    • /
    • 2016
  • 온라인 커뮤니티는 구성원들이 의견을 공유하고 감정을 교류하는 장이다. 이는 기업이나 브랜드의 마케팅 도구로도 적극 활용되고 있다. 이에 따라 마케팅 분야에서 온라인 커뮤니티에 대한 연구가 활발히 진행되고 있으나 비영리 온라인 커뮤니티를 규명한 연구는 드물고 특히 온라인 커뮤니티를 통해 형성되는 사회자본이 구성원의 특성에 따라 달라짐을 본 연구는 거의 없다. 본 연구는 송파지역 육아여성을 대상으로 한 온라인 커뮤니티 상에서의 실험을 통해 온라인 커뮤니티 활동에 대한 몰입이 온라인 커뮤니티의 만족에 영향을 미친다는 것을 검증하였다. 그리고 이러한 현상이 사회자본 형성을 통해 매개됨을 밝혔다. 이 때, 비취업모의 경우 연결적, 결속적 사회자본이 모두 형성되지만, 취업모의 경우 연결적 사회자본만 형성됨을 보였다. 본 연구는 특정 분야에서만 많이 사용되는 육아여성이라는 특징이 온라인 커뮤니티와 융합하여 연구될 수 있음을 제시하였고, 이를 바탕으로 실무적 시사점을 제공하였다.

카자흐스탄 구리제련소 슬래그 내 구리회수를 위한 선별 특성 (Characteristic of Flotation for Recovery of Copper from Copper Slag in Kazakhstan)

  • 박제현;최의규;최홍일;신승한
    • 자원리싸이클링
    • /
    • 제24권4호
    • /
    • pp.12-21
    • /
    • 2015
  • 일반적으로 구리제련 슬래그내 구리함량은 0.5-3.7% 혹은 그 이상의 높은 비율로 포함되어 있며, 슬래그내 구리회수에 대한 대표적인 방법으로는 부유선별, 침출 그리고 배소가 있다. 본 연구에서는 부유선별법에 의한 구리 회수방법을 검토하였으며, 잔세이트포수제를 이용한 황화부선을 수행하였다. 산성과 알칼리 조건에서 부유선별 특성을 관찰하였으며, pH 4 에서 구리회수율 50%, pH 11 에서 구리회수율 67%로 나타났으며, 특히 pH 11에서는 $100{\mu}m$ 이상의 입자가 정광으로 부유되어 회수율이 상대적으로 높게 나타나는 경향을 보였다. 슬래그 입도를 200 mesh 이하로 분쇄하여 단체분리도를 향상시켜 pH조건별 부유선별 실험을 수행한 결과, 회수율이 78 - 83%까지 향상되는 것을 확인할 수 있었다.

장기요양시설 거주 노인 대상 테크놀로지 활용 중재에 관한 체계적 문헌고찰 (Interventions Using Technologies for Older Adults in Long-term Care Facilities: A Systematic Review)

  • 김다은;김향;현정희;이효진;성혜현;배소영;탁성희;박연환;윤주영
    • 지역사회간호학회지
    • /
    • 제29권2호
    • /
    • pp.170-183
    • /
    • 2018
  • Purpose: Although innovative interventions using technologies have been introduced in long-term care settings, available evidence is still anecdotal. The purpose of this study is to investigate and synthesize the outcomes of interventions using technologies delivered to nursing home residents. Methods: Published clinical trials were identified through PubMed, CINHAL, Cochrane and PsycINFO databases and manually hand-searching. Eligible studies were articles published between 1997-2016 in English or Korean with a randomized controlled trial or quasi-experimental design in which interventions using technologies were delivered to nursing home residents. Results: A total of 20 studies were selected for this review. Types of interventions using technologies were classified into the electronic documentation technology (n=1), the clinical decision support system (n=1), the safety technology (n=1), the health and wellness technology (n=10), and the social connectedness technology (n=7). Overall resident outcomes indicated that interventions using technologies improved behavioral symptoms and psycho-social outcomes, but mixed results were shown in the aspects of physical function, cognitive function, social relationship and quality of service. Conclusion: This review demonstrates that incorporating technologies into nursing home care have positive effects on residents' psycho-social outcomes and behavioral symptoms. To disseminate the effectiveness of interventions using technologies, further research is needed to determine what mechanisms underlying such relationships exist.

폐주물사의 용융처리에 관한 Computer Simulation (Computer Simulation for Smelting Tretment of Waste Casting Sand)

  • Chung, Won-Sub;Min, Dong-Jun;Kim, Yong-Ha
    • 자원리싸이클링
    • /
    • 제5권3호
    • /
    • pp.24-30
    • /
    • 1996
  • 철강주물 생산량의 증가로 인하여 폐주물사의 발생량도 급격히 증가하고 있다. 1980년에 약 23만톤의 폐주물사 발생이 1993년도에는 약 48만톤으로 증가했다. 폐주물사의 처리는 대부분 매립에 의존하고 있으며 일부 건식법, 습식법 그리고 유동배소로법에 의한 처리가 행해지고 있지만 그 처리량은 미미한 상태이다. 폐주물사의 처리비용이 높아지고 환경규제가 심해지고 있기 때문에 용융에 의한 폐주물사의 처리에 관심을 가져야 한다. 본 연구에서는 국내의 주물생산량 및 폐주물사의 발생현황을 추적해 보고 용융방법의 채택 가능성을 검토하기 위하여 용융공정을 대상으로 물질 및 에너지 수지를 세워 계산하였다. 본 연구결과를 요약하면 다음과 같다. 폐주물사를 상온에서 용해하는 것보다 큐포라의 배기열등을 이용하여 예열하면 석탄의 원단위가 떨어지는 것을 알 수 있다. 그리고 용융 공정의 경우 에너지 수지측면에서 2차 연소율의 향상과 열회수율의 향상 기술이 무엇보다도 중요한 것을 알 수 있었다. 용융공정에서 에너지 절감을 위해서는 연료선택이 중요하며, 특히 휘발분이 낮은 석탄을 사용하는 것이 유리하다.

  • PDF