• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.110-115
• /
• 2015

In this paper it is proposed to solve the problem of particulate matter reducing apparatus of the current DPF. One exhaust gas passage 2-way controlled to purify the exhaust gas generated during combustion efficiently. Through the control of the rotary valve within a single device, it is possible to prevent the exhaust pressure increases due to particulate matter accumulate inside the developing DPF. Develop DPF device capable of inducing a high efficiency of the output in order to improve the problem of reducing the engine output and fuel efficiency.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.133-138
• /
• 2012

Exhaust facility has basically the role of flame deflector, and considering additional functions, it can be classified by noise/emission suppressor and altitude simulation facility. In this paper, principles of flame deflector, jet pump, emission suppression are presented for exhaust treatment facility. Principles of noise suppression caused by Mach wave mitigation, jet energy mitigation by water evaporation and condensation are shown. In addition, a concept of vertical exhaust treatment facility is presented applying basic principles aforementioned.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.211-212
• /
• 2001

자동차 생산공정은 일반적으로 프레스, 차체, 도장, 의장으로 구분되어 진다. 특히 차량의 조립 완성 후 엔진과 하부 샤시를 검사하는 Test 라인 공정에서는 차량운전 상태에서만 검사를 실시하는 작업특성 때문에 자동차 배기가스가 실내환경 오염을 유발하고 있다. 그래서 대부분 자동차 공장의 경우 배출가스에 대한 제어방식 및 배기 유량 부족으로 자동차 생산을 위하여 실내에서 작업하는 근로자들에게 두통 및 호흡기질환이 유발되고 있다. (중략)

• Journal of the korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.17-20
• /
• 1979

Transistor식 점화장치는 자동차의 배기 공해대책, 연료저감대책 등의 방안으로 근래에 급속히 발전된 System이다. Transistor 점화장치로 요구되는 배경은 다음과 같다. [1] 화화출력이 커져서 Engine에 있어서 확실한 연소가 기대되고 배기정화책 연료저감책에 유 효하다. [2] 기계적인 접점이 없으므로 장기적으로 Engine의 성능을 일정하게 유지한다. [3] 저회전에서 고회전까지 높고 안정된 화화출력을 갖고 있기 때문에 시동특성 고속특성이 양 호하다. [4] 점화시기제어에 신기능부가가 용이 이와같은 목표를 달성하기 위하여 세계각국의 자동차 Maker는 각각의 독자적인 System 회로방식을 개발하여 Transistor점화장치를 실용화하고 있 으나 우리나라에서는 아직도 자동차에 기계식 점화장치를 사용하여 생산하고 있는 실정이다.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.10-17
• /
• 2002

The objective of performing this study is to develop low emission condensing gas boiler. To reduce NOx and CO, three reasonable distances between burner and heat exchanger were decided through the experiments of model plane burner. Three burners with different diameter were made and then emission characteristics were examined. The optimum burner geometry was determined from flame stability, pollutant emission characteristics and applicability to the practical boiler system. In the domain of equivalence ratio 0.68~0.85, turn-down ratio of the burner designed by this research was extended to a wider range of 5 : 1. Thermal efficiency of the boiler developed by this study reached to 97% (LHV basis) of heating water efficiency at heating load of 20,000 kcal/hr when fueled by both of LNG or LPG. Emission ($O_2$=0%, wet basis) of NOx and CO concentration was 26 ppm and 85 ppm when fueled by LNG, 41 ppm and 113 ppm when fueled by LPG respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.114-120
• /
• 2020

In this study, we analyzed the structural characteristics of soot, which is one of the anticipated regulatory substances of the IMO, and used a novel classification method to distinguish between exhaust soot and engine soot in marine engines. As an extension of a recent study on exhaust soot recycling, annealing was performed at 2,000 ℃ on engine soot to determine whether it could be recycled. Soot samples before and after annealing were analyzed using HR-TEM and Raman spectroscopy. The HR-TEM results showed that exhaust soot and engine soot had similar nanostructures; the exhaust soot has a spherical primary particle with a chain-like structure, whereas engine soot particles have amorphous structures. The Raman spectroscopy showed a D-peak and a G-peak for both exhaust soot and engine soot. However, the G/D ratio indicated that the value of exhaust soot was relatively higher than that of engine soot, which implies that the exhaust soot has a more graphitized structure. The analysis of annealed engine soot confirmed that graphitization proceeded without any problems, similar to the exhaust soot. This confirmed that both exhaust soot and engine soot generated by marine diesel engines could be recycled as graphite materials.

• Korean Journal of Optics and Photonics
• /
• v.24 no.4
• /
• pp.184-188
• /
• 2013

Two types of polymer-based optical splitters with $200{\mu}m$ large core are presented for optical multimode networks, such as smart home networks, intelligent automotive networks, etc. Optical splitters that have 1:1 symmetric and 9:1 asymmetric structure were fabricated by a ultra violet(UV)-imprint technology using a deep etched Si(silicon) master by the Bosch process. In this paper, we successfully fabricated the symmetric and asymmetric optical splitters with suitable optical network applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.379-385
• /
• 2002

In this paper, frequency trifler fur 8 GHz local oscillator was designed and fabricated using MESFET. The third order harmonic was generated by biasing the transistor on A class. The fundamental frequency and the second harmonic were suppressed by using λ$\_$g//2 stub and band pass filter. As results, conversion gain of 2.67 ㏈ at 8.31 GHz, the harmonic suppression of -41.17 ㏈c, the bandwidth of 510 ㎒ were measured.red.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.5
• /
• pp.635-642
• /
• 1998

In automobile exhaust system. Internal pressure pulsation and shell vibration greatly affect the surface sound radiation. This noise is emitted from the muffler outer shell due to the pulsation of the exhaust gas pressure. This paper describes an analytical study of these characteristics as influenced by exhaust system structure. An exhaust simulator was used for generating the pressure pulsation. The relationship between shell vibration and radiated noise was used for generating the pressure pulsation. The relationship between shell vibration and radiated noise was identified by finding FRF.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.892-898
• /
• 2000

This study is on the development of a new muffler composed of a valve system using an elasticity or spring. The valve system using the elasticity of spring is set along the exhaust-gas flow and designed to work itself alone the driving condition of a engine. By that reason the engine capacity is so enlarged that a muffler with controller sensing exhaust-gas pressure is able to be satisfied to noise reduction and- power enlargement more than conventional muffler. The purpose of this study is to develope the new muffler which has more noise reduction and power enlargement than conventional muffler and electric-control muffler.