• Korean Journal of Optics and Photonics
• /
• v.23 no.6
• /
• pp.269-273
• /
• 2012

It is important to control the beam pattern of an LED by the design of a reflector. The optimum conditions of the structure parameters for the 2 segment LED reflector are analyzed and compared as they vary depending on the various intensity distributions of light output on the LED chip surface. It is also interesting that combining various types of reflectors is possible to give several efficient beam patterns, such as the maximum intensity profile or relatively wide controllability of beam angle.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.264-269
• /
• 2007

Today's research has been focused on changing the light source from filament to LED for luminarie illumination to overcome the shortcoming of a filament. The purpose of this research is to make an appropriate high power LED package structure for luminarie. We simulated radiation patterns of the various structures by the ray tracing simulator (Light Tools), and also analyzed the radiation patterns using an LED test system (OL770). As we increased an inner reflector angle, the radiation pattern split into two peaks and the angle between two peaks became larger. In addition, when we increased an outer reflector angle, the angle between side peaks gradually decreased, while it increased again when the angle reach $50^{\circ}$. These results could be understood from the ray tracing of the light reflected from two reflectors. We made the high power LED package for luminarie on the condition of the optimized structure which was made by ray tracing simulation results, and we measured the radiation patterns by using an LED test system, and these results were well matched to the simulation results.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.113-116
• /
• 2009

최근 차별화된 도시 이미지의 창출전략으로 도시 야간경관의 중요성이 강조되고 다양한 도로의 환경조건에 따른 광원이 새롭게 개발되고 있다. 현재 적용되고 있는 도로조명의 기준을 살펴보고 광원별 배광특성을 이용한 시뮬레이션을 통하여 도로조명의 효율적 설치 및 운영을 위한 정보를 제공하고자 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.8
• /
• pp.8-13
• /
• 2009

LED BLU(Back Light Unit), based on MCPCB(Metal Core Printed Circuit Board) with anodizing oxide dielectric layer and improved thermal dissipation property, are presented. Reflecting cups were also formed on the surface of the MCPCB such that optical coupling between neighboring chips were minimized for improving the photon extraction efficiency. LED chips were directly attached on the MCPCB by using the COB (Chip On Board) scheme.

• Korean Journal of Optics and Photonics
• /
• v.23 no.5
• /
• pp.222-226
• /
• 2012

The design methods of the reflecting cup employed in an LED lamp are presented. The beam patterns of an LED lamp can be adjusted by functional segmentation of the reflector height. Thus, the reflecting angle of slope was designed according to the height. The analysis of the designed reflecting cup shows that precise adjustable beam patterns can be achieved.

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.236-240
• /
• 2009

LED modules, based on MCPCB with a hard barrier oxide layer and an improved thermal dissipation property, are presented. Reflecting cups were also formed on the surface of the MCPCB such that optical coupling between neighboring chips was minimized for improving the photon absorption loss. LED chips were directly attached on the MCPCB by using the COB (Chip On Board) scheme. The LED modules showed significantly enhanced light outputs, compared to the LED modules based on conventional MCPCBs.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.23-30
• /
• 2009

LEDs are increasingly used for many applications including automotive, aviation, display, transportation and special lighting applications. Generally, the RGB multichip LED luminaire applied to signboard, emotional lighting system and display device and the white LED luminaire applied to general lighting system. white LED spectra for general lighting should be designed for high luminous efficacy as well as good color rendering. This paper describes characteristics of LED luminaire white LED and RGB multichip LED. Two type of LED luminaire prototype used experiment physical, electrical and optic test and performance analyzed. RGB multi-chip and phosphor-type white LED luminaire were analyzed by experiment on their color characteristics and luminous efficacy of radiation, distribution curve, and electrical characteristics. Research work is in progress to develop an improved performance for optic and electrical works well for two type of LED luminaires.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1607_1608
• /
• 2009

LED를 조명용으로 사용하기 적합하도록 Lambertian Type의 백색 LED에 1차 렌즈를 씌어서 일정거리의 작업 면에서 균일한 조도를 얻고자, 광학 설계프로그램인 LightTools 를 이용하여 렌즈의 형태를 모델링하고 시뮬레이션을 통해 LED 광원의 배광분포 등의 광학적 특성을 비교분석함으로써 조도 균제도가 우수한 렌즈의 형태를 얻었다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.15-18
• /
• 2003

무전극 형광램프는 발광하는 부분의 사이즈가 크고 광원의 특성상 점광원으로 볼 수 없기 때문에 효율적인 광학기구를 설계하기 어렵다. 특히 반사판 설계시 반사광이 램프로 재흡수 되는 것을 고려하여야 한다. 본 논문은 무전극 형광램프에 대하여 반사광이 램프로 재흡수 되는 것을 막고 효율을 높이며 목표배광에 맞출 수 있는 2차원 축대칭형 반사판 설계법을 제시하였다. 그리고 이 설계법의 문제점과 해결방법에 대하여 고찰하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.81-84
• /
• 2012

이 논문은 LED 조명을 방송용 광원으로 실용화하는 과정에서 필수적으로 고려해야 할 기술적 측면에 대한 고찰이다. 방송용 LED 광원의 실용화를 위한 기술적 개발은 사실적이고 자연스러운 영상, 특히 방송 영상의 대부분을 차지하는 인물의 얼굴색을 사실적으로 재현하는 것을 목표로 한다. 이 목표를 달성하려면 LED 조명의 고효율과 분광분포 특성이 최대한으로 자연광에 가까워야 한다. LED를 스튜디오 방송조명의 광원으로 활용하기 위해서는 조도, 연색성, 색온도, 색공간, 디밍 커브, 배광 곡선, 소음과 관계한 구체적인 기술적 특성이 요구되고 있다.