• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.65-74
• /
• 2013

A research program for the roe deer (Capreolus pygargus) has been set up at the Jeju Experimental Forest of Warm-temperate and Subtropical Forest Research Center in Jeju Island. To explore the home range size and habitat environment, 3 males and 3 females have been captured and released with GPS-CDMA based telemetry since 24th April 2012. Among them 2 females were captured at Hannam Forest of Seoguipo, were pregnant and monitored by the tracking system. There are significantly different patterns in behavior around the parturition. After parturition they show recurrence behavior toward one point in the forest, while they have irregular patterns in moving before. To calculate the home range size, the MCP (minimum convex polygon) and Kernel Method are applied through the extension of ESRI ArcView GIS 3.2a. The pregnant female captured 9th May 2012 has the size of MCP=67ha and Kernel 95%=0.5ha and the pregnant female captured 12th July 2012 has the size of MCP=82ha and Kernel 95%=0.9ha. Although a fawn could move immediately just after the birth likely others to avoid any risks, they stay at very narrow space significantly, and the size become wider when more time goes by. Furthermore, they mainly have a home range away from human activity area such as forest tracking roads. The habitat environment for the parturition is summarized as 40years old cryptomeria forests with new sprouting shrubs for foods, which are the controlled forest through the thinning and removing shrubs 2 years ago. This means that forest works could cause positive results for the parturition and survival of young. The period of parturition is earlier than highland in Jeju Island, the size of home range is narrower than other countries, and the habitat environment of the shelter for a fawn is similar to previous research in other countries.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.169-179
• /
• 2007

This study was to compare the microshear bond strength $({\mu}SBS)$ of light- and chemically cured composites to enamel coupled with four 2-step self-etch adhesives and also to evaluate the incompatibility between 2-step self-etch adhesives and chemically cured composite resin. Crown segments of extracted human molars were cut mesiodistally, and a 1 mm thickness of specimen was made. They were assigned to four groups by adhesives used: SE group (Clearfil SE Bond) AdheSE group (AdheSE), Tyrian group (Tyrian SPE/One-Step Plus), and Contax group (Contax) Each adhesive was applied to a cut enamel surface as per the manufacturer's instruction. Light-cured (Filtek Z250) or chemically cured composite (Luxacore Smartmix Dual) was bonded to the enamel of each specimen using a Tygon tube. After storage in distilled water for 24 hours, the bonded specimens were subjected to ${\mu}SBS$ testing with a crosshead speed of 1 mm/minute. The mean ${\mu}SBS$ (n=20 for each group) was statistically compared using two-way ANOVA, Tukey HSD, and t test at 95% level. Also the interface of enamel and composite was evaluated under FE-SEM. The results of this study were as follows ; 1. The ${\mu}SBS$ of the SE Bond group to the enamel was significantly higher than that of the AdheSE group, the Tyrian group, and the Contax group in both the light-cured and the chemically cured composite resin (p < 0.05). 2. There was not a significant difference among the hdheSE group, the Tyrian group, and the Contax group in both the light-cured and the chemically cured composite resin. 3. The ${\mu}SBS$ of the light-cured composite resin was significantly higher than that of the chemically cured composite resin when same adhesive was applied to the enamel (p < 0.05). 4. The interface of enamel and all 2-step self-etch adhesives showed close adaptation, and so the incompatibility of the chemically cured composite resin did not show.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.985-996
• /
• 2007

The purpose of this study is to analyze the symbolism of traditional Korean patterns which reflect an emotional cultural background of Korean people, to apply modernized and developed patterns to Textile Design for fashion cultural products, and to explore productive direction of developing designs of fashion cultural products. The process of developing Textile Design of fashion cultural products which applied symbolism of traditional Korean patterns was conducted as follows. Firstly, based on '05 S/S-'07 S/S fashion trends, a design concept wat decided(man-urban ethnic style, woman-romantic ethnic style). Secondly, motive was abstracted from selected traditional patterns to develop into modem patterns. Thirdly, items were selected according to symbolic meaning of traditional Korean patterns. Man's items included shirts, necktie, and handkerchief which were highly preferred by Korean and foreign visitors. Finally, developed textile designs were diagrammed by item using textile CAD and an illustrator 10 and presented as images. The following results were obtained. First, textile designs for fashion cultural products, in which apply traditional patterns may reflect the understanding of traditional aesthetic beauty and philosophical approach by applying symbolic significance inherent in patterns as well as the aesthetics of the patterns. Second, traditional patterns have been recognized as old fashioned to consumers because they have been often used for traditional handicrafts or folk products. If their unique shapes are changed or simplified, emphasizing images, and trend styles and colors are used, they will be recreated as a modem design. Third, textile designs using traditional patterns may provide various images and visual effects according to techniques and production methods. Then, the method will be applied to many items. Finally, since traditional patterns in fashion cultural products can be used as our unique design elements, they can be utilized as the source of design inspiration for the development of value-added products.

• Horticultural Science & Technology
• /
• v.29 no.1
• /
• pp.16-22
• /
• 2011

In developing soil wetting agent using polyoxyethylene nonylphenyl ether (PNE) and polyoxyethylene castor oil (1:1; v/v), the effect of application rates on changes in concentration of PNE, initial wetting of peatmoss + perlite (7:3) medium, and growth of hot pepper (Capsicum annuum L. 'Knockwang') plug seedlings were investigated. The elevation of application rates of wetting agent increased the amount of water retained by the root media. The treatment of 2.5 $mL{\cdot}L^{-1}$ showed similar water retention to + control ($AquaGro^L$ 3.0 $mL{\cdot}L^{-1}$). Most of the liquid wetting agent (LWA) incorporated during the medium formulation leached out in the first and second irrigation, then it decreased gradually until 10 times in irrigation. In investigation of the influence of LWA on position of water infiltrating into root media, the vertical water movements in treatments of 0.5, 1.0, and 1.5 $mL{\cdot}L^{-1}$ were much faster than those in 0.0 $mL{\cdot}L^{-1}$ (-control), but relative speed of water movement decreased by the elevation in application rate of LWA to 2.0 or 2.5 $mL{\cdot}L^{-1}$. The evaporative water loss of root media that to contained various rate of LWA and irrigated to reach container capacity was the fastest in -control among the treatments and it delayed as the application rate of LWA was elevated. The plant height of 22.2 cm in 0.5 $mL{\cdot}L^{-1}$ and stem diameter of 3.26 mm in 1.0 $mL{\cdot}L^{-1}$ were the highest among the treatments tested. The treatment of 1.0 $mL{\cdot}L^{-1}$ also had the heaviest fresh and dry weights such among treatments tested as 3.08 g and 0.861 g per plant, respectively. The elevated application rate over than 1.5 $mL{\cdot}L^{-1}$ resulted in decreased seedling growth. The results mentioned above indicate that optimum application rate of LWA is 1.0 $mL{\cdot}L^{-1}$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.149-155
• /
• 2015

Tooth implant is located in oral cavity and affects neck, skull base, and facail image. These magnetic inhomogeneities are usually frequency encoding direction which cause artifacts due to change of signal strength and geometric distortion. First, to evaluate signal to noise ratio (SNR) of magnetic resonance image caused by tooth implant this study uses meat phantom which is similar to human body and is consisted with fat, muscle, and water to measure signal to noise ratio. Second, signal to noise ratio by using custom-made fixed phantom is measured, and then signal to noise ratio size of different tooth implant types is compared and analyzed. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for meat phantom were 2.76, 2.22, 1.88, and 1.57 on T1 SE, 1.88, 1.78, 1.65, and 1.79 on T2 FLAIR, 2.28, 2.25, 2.88, and 2.05 on T2 FSE, and 2.74, 1.94, 1.67, and 1.48 on T2 GRE. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for fixed water phantom were 1.2, 1.06, 1.12, and 1.22 on DWI, 1.93, 1.87, 1.93, and 2.06 T1 SE, 1.83, 1.76, 1.82, and 1.92 on T2 FLAIR, 1.85, 1.79, 7.86, and 1.97 on T2 FSE, and 1.97, 1.93, 1.99, and 2.06 on T2 GRE. By considering through the results, patients and dentists need to consider some impacts from testing many aspects although their main purpose of having tooth implants is a dental restoration. Moreover, depending on the tooth implant characteristics of individual patients this study results can be used as baseline data when choosing test protocol.

• Journal of Christian Education in Korea
• /
• v.67
• /
• pp.11-44
• /
• 2021

In the early 21st century, the global COVID-19 pandemic, which has arisen during the development of the technological science of the Fourth Industrial Revolution, has been a great challenge in all fields including politics, economy, industry, education and religion in Korean society. To prevent the spread of the COVID-19 epidemic, the Korean government announced 'social distancing guidelines,' focused on the 'prohibition of three conditions'(crowd, closeness, airtight) for safety reasons. These quarantine guidelines made it more difficult for Korean churches and Sunday schools to operate. In general, looking at the statistical data of the major denominations of the Korean Church in the second half of the 20th century, shows that the Church has entered a period of stagnant or declining growth. Data also show that the number of students attending Sunday School is decreasing. The researcher identified four causes of the crisis faced by the Korean church and Korean Sunday school entering the 21st century. These trends are influenced by the tendencies of postmodernism, the deconstruction of modern universalism, the certainty and objectivity of knowledge, and the grand narrative and worldview of diffusion. Moreover, it is a phenomenon in which the young population decreases in contrast to the increasing elderly population in the age of population cliff in Korean society. Sunday Schools are also facing a crisis, as the youth population, who will become the future heroes of the Korean church, is declining. Finally, constraints of Church and Sunday school education activities are due to COVID-19 Pandemic. As analysis shows the loss of the Church's educational vision and a decrease in the passion for education. Accordingly, the researcher suggests four new strategies for the next generation of Korean Sunday schools, whose ranges from 200 members or less; this range covers the majority of Sunday School program run by churches in Korea. First, in the age of postmodernism, a time of uncertainty and relativism, Christian Societies requires teachers who are certain of absolute Christian truth and faith. Second, in an era of declining population cliffs for younger generations, a shift to a home-friendly Sunday school paradigm is needed. Third, during the COVID-19 pandemic, educational activities must appropriately utilize face-to-face and non-face-to-face communication. Finally, even in difficult times, Korean Sunday school should nevertheless remember the Lord's great commandment(Matthew 28:18-20) and restore the vision and passion of education to announce and teach the gospel. The researcher hopes that this study will provide small, positive steps in rebuilding Korean Sunday school educational activities for future generations in difficult times.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.4
• /
• pp.113-132
• /
• 2019

The degree of females' participation in corporate activity has been recently increased over the world and females' participation in economic activity may be new dynamic fuel for the Korean economy that falls into the vicious cycle of low growth. Start-up, therefore, has increasingly taken attention as an opportunity for females whose careers were interrupted to re-enter the labor market. The need for studies that examine factors influencing the decision of start-up is also increased along with the increase of the ratio of females' start-up. This study aims to verify effects of the women's characteristics(women discrimination, women's role conflict) and the human networks of females whose careers were interrupted, with the intention for entrepreneurial intention, which are mediated by personal attitudes and subjective norm suggested by Ajzen's Theory of Reasoned Action, based on an empirical research. The findings show that the human networks of females have an effect on attitudes toward start-up activity and subjective norm and the woman discrimination influence the personal attitudes. In contrast, the women's role conflict have no effect on both personal attitude toward start-up activity and subjective norm. This can be supposed as an outcome resulted from the subjects' low level of conflict caused by their sex roles, on their age distribution. The relation between subjective norm and entrepreneurial Intention seemed to be moderated by their perceived strong entrepreneurial supporting policy. Their attitudes toward start-up activity were found to have a mediating effect on the relation between the women discrimination, human networks and entrepreneurial Intention, while the subjective norm only mediated the relation between human networks and entrepreneurial Intention. Based on such results, this study attempts to suggest theoretical suggestions and the direction of various entrepreneurial supporting policy for the increase and the growth of start-up of females whose careers were interrupted, in Korea.

• Journal of Hospice and Palliative Care
• /
• v.22 no.3
• /
• pp.105-116
• /
• 2019

Purpose: Pediatric palliative care (PPC) is emphasized as standard care for children with life-limiting conditions to improve the quality of life. In Korea, a government-funded pilot program was launched only in July 2018. Given that, this study examined various PPC delivery models in other countries to refine the PPC model in Korea. Methods: Target countries were selected based on the level of PPC provided there: the United Kingdom, the United States, Japan, and Singapore. Relevant literature, websites, and consultations from specialists were analyzed by the integrative review method. Literature search was conducted in PubMed, Google, and Google Scholar, focusing publications since 1990, and on-site visits were conducted to ensure reliability. Analysis was performed on each country's process to develop its PPC scheme, policy, funding model, target population, delivery system, and quality assurance. Results: In the United Kingdom, community-based free-standing facilities work closely with primary care and exchange advice and referrals with specialized PPC consult teams of children's hospitals. In the United States, hospital-based specialized PPC consult teams set up networks with hospice agencies and home healthcare agencies and provide PPC by designating care coordinators. In Japan, palliative care is provided through several services such as palliative care for cancer patients, home care for technology-dependent patients, other support services for children with disabilities and/or chronic conditions. In Singapore, a home-based PPC association plays a pivotal role in providing PPC by taking advantage of geographic accessibility and cooperating with tertiary hospitals. Conclusion: It is warranted to identify unmet needs and establish an appropriate PPD model to provide need-based individualized care and optimize PPC in South Korea.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.297-305
• /
• 2018

Purpose: This study aimed to analyze stress distribution and maximum von Mises stress generated in intracoronal restorations and in tooth structures of mandibular molars with various types of cavity designs and materials. Materials and Methods: Three-dimensional solid models of mandible molar such as O inlay cavity with composite and gold (OR-C, OG-C), MO inlay cavity with composite and gold (MR-C, MG-C), and minimal invasive cavity on occlusal and proximal surfaces (OR-M, MR-M) were designed. To simulate masticatory force, static axial load with total force of 200 N was applied on the tooth at 10 occlusal contact points. A finite element analysis was performed to predict stress distribution generated by occlusal loading. Results: Restorations with minimal cavity design generated significantly lower values of von Mises stress (OR-M model: 26.8 MPa; MR-M model: 72.7 MPa) compared to those with conventional cavity design (341.9 MPa to 397.2 MPa). In tooth structure, magnitudes of maximum von Mises stresses were similar among models with conventional design (372.8 - 412.9 MPa) and models with minimal cavity design (361.1 - 384.4 MPa). Conclusion: Minimal invasive models generated smaller maximum von Mises stresses within restorations. Within the enamel, similar maximum von Mises stresses were observed for models with minimal cavity design and those with conventional design.