• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.218-221
• /
• 2001

이 논문에서는 800MHz 대역에서의 interdigital 커패시터를 이용한 높은 지향성의 방향성 결합기를 설계하였다. 본 논문에서는 20dB 방향성 결합기 설계에 있어 interdigital 커패시터의 파라미터 W, G, Ge, Lo, Wt에 따른 결합도와 격리도의 변화를 분석하여 최적화 함으로써 30dB이상의 지향성을 얻도록 설계하는 것을 목적으로 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.705-713
• /
• 2021

Because the cage assembly serves as the launch platform, an accurate aim is essential to ensure shooting accuracy for the target. On the other hand, the abnormal rotation of the cage due to the directional errors of the K-MLRS has continuously caused quality problems. The quality problem of weapon systems may have a negative impact on the military's power loss. In this study, improvement plans were derived by examining the defects and analyzing the directional errors of the K-MLRS launcher. In addition, all possible causes of directional errors were derived from the flow diagram for cage directionality. Based on the results, the defense design through the software program was intended to prevent the loss of direction. Through this study, the signal error of the resolver was improved by preventing unspecific signals in the data. Furthermore, the directional judgment method was improved to minimize the impact of data distortion. Lastly, directional storage and verification methods were improved so that data for the cage rotation direction would not be affected by errors. For the design improvement method, the reliability was verified through the system applicability. This study is expected to be a reference for failure analysis and design for similar weapon systems in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.8
• /
• pp.574-581
• /
• 2019

This paper investigates the effects of thrust misalignments and offsets of the lateral center of gravity of a space launch vehicle on its guidance performance. Sensitivity analysis and Monte Carlo simulations are applied to analyze their effects by computing changes in orbit injection errors when including the error sources. To compensate their effects, the attitude controller including an integrator additionally and the Steering Misalignment Correction (SMC) routine of the Saturn V are considered, and then Monte Carlo simulations are performed to evaluate their performances.

• The Journal of Engineering Geology
• /
• v.11 no.3
• /
• pp.303-313
• /
• 2001

A cut-slope near Guam-Ri Hwado-Eup Namyangju-Si Kyunggi-Do collapsed during a heavy rainfall over 400mm at 28th of August 2000. The cut-slope collapse reportedly developed mainly by block sliding along a set of discontinuities, although slope angle of the cut-slope was 40$^{\circ}$(1:1.2) that agrees with the road construction criteria. This study aims to analyze differences and correlations among several data-collecting methods limited to discontinuity analysis related with cut-slope collapse. This study started with analysing discontinuity surface characteristics, geology of the country rock and orientations of the discontinuities directly related with the collapse. Analysis of aerial photos around the study area provided regional lineament data, and discontinuity plane description and measurements were collected from core logging and Borehole Image Processing System (BIPS). Spearmans correlation ranking coefficient method was used to get correlation of discontinuity planes according to analysis methods. The result suggests that the correlation coefficient is ${\gamma}_s$ = 0.91 Plus, stability analysis of discontinuity plane orientation data using equal-area stereonet revealed that the study area is unstable to planar failure. This study suggests that the cut-slope angles currently applied should be shallower and that significant attention is required to orientation distribution of discontinuities existed in cut-slopes studies.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.171-176
• /
• 2014

The polarization characteristics of ultracompact polarization-insensitive directional coupler (PIDC) based on double sandwiched rib-type waveguide are explored in detail by using longitudinal modal transmission-line theory (L-MTLT). To obtain the polarization-insensitive condition of ultracompact directional coupler, the coupling length and coupling efficiency as functions of the refractive index and thickness of sandwiched rib-type waveguide are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the ultracompact polarization-insensitive coupler with hundreds of micrometer scales is realized by properly choosing structural and material parameters of double sandwiched layers. Furthermore, the influence of fundamental mode profile, which is distributed in lateral waveguide of coupler, on the coupler performance has been investigated.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.22-28
• /
• 2008

It proposes the novel design conditions to maximize the power coupling of active directional couplers with mismatched access guides. To verify the validity and accuracy of the conditions proposed, a new coupling efficiency is defined and it depends on the reflection coefficients occurred at the discontinuous input/output interfaces. The numerical results reveal that the phase-matched condition and the minimum-gap condition for those couplers are no longer suitable to optimize the design parameters and a new criterion is needed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.672-677
• /
• 1996

Volatile flavour components rates from aromatic rices were analyzed by Electronic nose systems. In functional group, polar compounds and aldehyde compounds showed much of volatile flavour components than apolar compounds, sulphur compounds and aminated compounds. The profiles of volatile flavour components rates were markedly differents of sen-sing times, amylose content.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.835-838
• /
• 2005

지문 인식 알고리즘은 크게 특징점을 추출하여 특징점의 좌표, 특성, 방향각 등을 정보로 하여 인식하는 특징점 기반 알고리즘과 지문의 융성 패턴을 분석하여 인식하는 패턴 기반 알고리즘으로 나뉜다. 본 논문에서는 기존의 특징점 기반 지문인식 알고리즘과 비교하여 개선된 전처리 방법을 이용하여 보다 빠르면서도 정확한 지문 특징점 추출 알고리즘을 제안한다. 지문영상에서 방향성 정보를 추출을 위해 지문영상을 일정한 크기를 갖는 국부영역으로 나눈 후, 각 국부 영역의 융선 방향을 계산하여 방향성 정보를 얻는다. 추출된 방향성 정보를 이용하여 영상 개선 및 특징점을 추출하는 지문 인식 알고리즘을 제안하고자 한다.

• Proceedings of the KSEG Conference
• /
• 2005.04a
• /
• pp.157-164
• /
• 2005

BIPS와 Televiewer를 이용하여 10개의 지하수 관측공에서 획득된 1,591개 불연속면을 분석하여 지하수 유동과의 관계를 비교${\cdot}$분석하였다. 연구지역 내의 지형은 산계가 잘 발달된 계곡형 지형이며, 수계의 발달은 매우 미약하다. 연구지역 주변에는 북북동-남남서 방향의 양산단층과 동래단층이 발달되어 있으며, 연구지역 내에는 EW방향의 선구조도 발달되어 있다. 지하수공내에서 조사된 불연속면의 주 방향은 위성사진에서 판독된 선구조의 방향과 대부분 일치한다. 지구통계기법을 이용하여 작성된 지하수위 등고선도에서 추정된 지하수 유동방향과 유향${\cdot}$유속기에서 측정된 지하수 유향은 거의 일치하지만, 단열암반에 발달된 불연속면의 방향과 지하수 유동방향은 2가지로 해석되었다. 첫째는 단열암반에 발달된 불연속면의 방향과 지하수 유동방향이 잘 일치하는 경우(BH-01, 03, 04, 12공), 둘째는 불연속면의 방향과 지하수 유동방향이 잘 일치하지 않는 경우(BH-02, 05, 07, 11) 이다. 지하수 유동방향이 불연속면의 방향과 일치하지 않는 경우는 지형의 변화에 더 영향을 받는 것으로 나타났다. 따라서 단열암반 내에서 지하수의 유동은 단열의 방향성에 영향을 받지만, 지형의 특성에도 큰 영향을 받는다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.11-14
• /
• 1984

The inheritance of scent in rice leaf and its genetic association with base color, hull color and resistance to bacterial leaf blight were studied in F$_2$ population of two rice crosses, P-33-C-19 (scented)/Zhu-Lian-Ai and P-33-C-19/Kataktara DA2. The scent was identified by leaf analysis at tillering stage. The scented and non-scented plants segregated in the ratio of 1scented: 3non-scented showing that a recessive gene responsible for the expression of scentedness. The scentedness was independently segregated with base color. hull color and resistance to bacterial leaf blight.