• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1066-1071
• /
• 1998

This paper aims to examine the relationship between the directional characteristics and the quality for fingerprint image as preprocessing stage for adative image enchancement. In order to do that, we transformed the original images into directional images and set up the subimage size of 16, 32, 64 and the direction of 1, 2, 3, 4. Then we extracted the accumulated directional value as the measurement of quality for fingerprint images. By using the clustering algirthm, we performed an analytic experiemnt with the result. Finally, we could extract the optimal subimage size and directional characteristics of fingerprint image.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.39-52
• /
• 2014

Limestone caves that consist of main passages and branches are formed by a variety of processes, and have the characteristic of developing with a preferred orientation controlled by discontinuities such as bedding, joints, and faults around the cave. However, it is difficult to analyze a representative orientation from various orientations. To interpret the overall development orientation of limestone caves, this study proposes new development orientation analysis methods, termed the Average Span Ratio Method (ASRM) and the Individual Development Ratio Method (IDRM), using the weighting of persistence. Nine limestone caves in Korea were randomly selected for testing the new methods. The methods show a stronger development orientation for limestone caves than that obtained by traditional methods, which consider only the distribution of development orientations. Based on an analysis of the relationship between the average span and the dip angle of bedding, it is confirmed that shallowly dipping bedding is a major contributor to the expansion of span in limestone caves. In addition, using scan-line survey data acquired in the field, we perform an RMR analysis of stability of the ground around limestone caves.

• Journal of Internet Computing and Services
• /
• v.17 no.1
• /
• pp.65-71
• /
• 2016

In this paper, we propose a novel analysis method and its algorithms to perform the betweenness centrality measurements on a valued and directed workflow-supported social network. The conventional workflow-supported social network model is to represent the existences of task transferring relationships among their performers by using a binary social network. However, it is necessary to consider not only the existences of task transferring relationships but also their quantities and directions in order to obtain much more effective and sophisticated analysis results. In conclusion, this paper newly defines a concept of valued and directed workflow-supported social network, and its betweenness centrality analysis method and algorithms. Especially, to verify the proposed method and algorithms, we try to apply the conventional method and the proposed method to an example workflow model respectively, and compare their betweenness centrality analysis results.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.826-831
• /
• 2003

보드 게임은 다양한 주제와 사회성을 바탕으로 발전해 왔으며, 최근에는 보드 카페 등의 활동으로 수많은 계층의 커뮤니티가 형성되고 있다. 그러나 이러한 보드 게임의 특성에 관한 연구는 전혀 이루어지지 않고 있다. 따라서 본 연구에서는 보드 게임의 놀이적 특성과 방향성에 따라 보드 게임을 분석하고 유형을 분류하였다.

• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.121-131
• /
• 2014

The stability of rock slope is mainly controlled by the orientation and shear strength of discontinuties in rock mass. Therefore, in kinematic analysis, the orientation of the combination of discontinuities and slope face is examined to determine if certain modes of failure can be occurred. In previous kinematic analysis, a representative orientation of the slope face and mean orientation of discontinuity set were used as input parameters. However, since the orientations of slope face varies according to locations of measurement, the representative slope face orientation could cause misunderstanding for kinematic instability. In addition, since the orientations of each discontinuity are scattered in the same discontinuity set, there is the possibility that uncertainties are involved in the procedure of kinematic analysis. Therefore, in this study, the detailed digital topographic map was used to obtain the orientation of slope face. In addition, the probabilistic analysis approach was utilized to deal properly with the uncertainties in discontinuity orientation. The proposed approach was applied to steep slopes in mountain road located in Baehuryeong, Chunncheon city, Gangwon-Do. The analysis results obtained from the deterministic and probabilistic analysis were compared to check the feasibility of proposed the analysis.

• The Journal of Engineering Geology
• /
• v.19 no.4
• /
• pp.517-528
• /
• 2009

Statistical analyses of cut-slope stability were performed over approximately 5.7 km section along the National road No. 25, which cross-cuts in NW-SE direction the Cheongwon and Boeun-Gun area, Chungbuk. A measure of slope-stability was established by using direct reinforcement and indirect protection methods in whole section. Orientations(dip/dip direction) of the slopes, foliations(bedding), cleavages and joints were measured in total of 30 slope sites. The results analyzed using stereographic projection indicate that major directions of the slopes come out predominantly in three directions: 1) $58^{\circ}/095^{\circ}$, 2) $60^{\circ}/296^{\circ}$ and 3) $59^{\circ}/212^{\circ}$. In analyses of dip direction and frequency of cut-slopes established by reinforcement and protection methods, slopes with dip direction of $80-120^{\circ}$ and $280-320^{\circ}$ mostly occur. However, slopes with dip direction of $0-80^{\circ}$(N and NW) and $120-160^{\circ}$(SE) are not distributed in the study area. Failure aspects were analyzed for three major directions of the slopes, respectively. The results of failure aspects analyzed indicate that slopes in the study area could generate various failures as the results of intersection and/or intersection combination among joints, foliations(bedding) and cleavages. However, possibility of failure in a slope of major direction No. 3 is statistically very low because of low frequency in total number of slopes with the direction and of formation of small scale-slopes geographically, although the slope might generate all aspects of failure-modes.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.151-152
• /
• 2009

최근 신경과학 분야에서 대뇌피질 영역 간 연관성 분석은 신경학적 질병 (자폐증, 간질, 정신 분열증)의 분석 및 진단에 적용되고 있다. 기존 대뇌피질 영역 간 연관성 분석은 뇌전도 (EEG), 기능적 자기공명영상 (fMRI), 뇌자도 (MEG)등이 이용되었지만, 뇌전도의 낮은 공간분해능, 기능적 자기공명영상의 낮은 시분해능 등은 영역 간 연관성 분석에 단점으로 작용되고 있다. 반면, 근적외선 분광법(NIRS)은 대뇌피질에서의 혈류변화(oxy-, deoxy-hemoglobin)를 비침습적이며 빠른 시분해능으로 측정할 수 있는 방법으로 최근 신경과학 분야에 응용되고 있다 [1-2]. 본 논문에서는 근적외선 분광법을 이용한 대뇌피질영역 간 연관성 분석의 효용성을 입증하기 위해, 쥐의 수염자극 시 대응되는 지역 (일차-, 이차 체감각피질, 일차 운동피질 영역)에서의 혈류변화 신호의 영역 간 연관성 분석을 하였다. 본 연구결과에 의하면 수염자극 시 일차-, 이차 체감각피질 영역에서의 방향성은 확인할 수 없었고, 일차-, 이차 체감각피질 영역에서 일차 운동피질영역으로의 방향성은 확인할 수 있었다. 본 결과는 기존 수염자극 시 활성화되는 전기신호의 패턴과 일치하며, 향후 신경과학적 질병의 분석 및 진단에 근적외선을 이용한 대뇌피질 영역 간 연관성 분석이 유용할 수 있음을 보여준다.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2015.11a
• /
• pp.430-443
• /
• 2015

신약개발은 국민의 건강권과 직결되며 국가 차원의 제약산업 육성을 위해 매우 중요하다. 그동안 신약개발 분야와 관련하여 다양한 연구가 수행되었지만, 신약개발 분야의 국가연구개발사업에 대한 효율성 분석은 매우 부족한 실정이다. 특히 R&D 분야는 연구개발시차, 일출효과(spill-over effect) 등으로 인해 투입과 산출의 일정한 방향성과 등비율적인 증감을 가정하는 CCR 모형이 적합하지 않다. 또한 가변규모수익을 가정하는 BCC 모형도 여유분(slack)으로 인해 의사결정단위간의 명확한 우선순위 도출이 어려운 한계점이 있다. 최근에는 R&D 분야의 특수성을 고려해서 자료포락분석 모형 중 RAM(Range Adjusted Measure) 모형을 활용한 분석방법이 제시되고 있다. RAM 모형은 가변규모수익 가정 하에 투입지향이나 산출지향처럼 방향성에 대한 사전적인 가정 없이 비효율성을 최대한 제거하는 방향으로 효율성을 측정하므로 R&D 분야의 효율성 분석에 적합하다. 특히 RAM 모형은 매우 강건한 단조성을 인해 의사결정단위 간 명확한 순위 구분도 용이하다. 따라서 본 연구에서는 자료포락분석 모형 중 RAM 모형과 토빗 회귀분석이 결합된 2단계 접근법을 활용해서 범부처전기신약개발사업을 중심으로 신약개발 분야의 국가연구개발사업들에 대한 효율성을 분석하고 주요 시사점들을 논의하였다.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.17-27
• /
• 2001

지하 굴착공동의 천장면에 형성되는 잠재적 키블록의 존재성과 운동학적 거동 양상 및 안정성을 해석적으로 분석할 수 있는 시스템을 개발하였다. 천장에서 측정된 절리들의 상대적인 위치와 방향성 자료를 이용하여 데이타베이스를 구축하였으며, 굴착설계도와 연계된 전산절리도를 작성하였다. 잠재적 키블록의 존재성과 거동양상은 사면체로 가정된 블록 옆면의 3차원 공간에서의 평면식을 절리의 방향성에 의거하여 구성하며 대수학적으로 분석되었다. 블록의 안정성 분석은 자중에 의해 미끄러짐이 발생되는 블록면의 공간 기하학적 특성을 고려하여 수행하였다. 개발된 분석시스템의 현장활용성을 검증하기 위하여 언양 자수정동굴에서 키블록 형성 및 거동양상을 조사하여 분석결과와 비교하였다.

• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.119-129
• /
• 2009

In relation to slope stability analysis, geologic characteristics and engineering properties of the discontinuities in three slopes selected are compared and analyzed by both square-inventory method and scanline survey. The aim of the study is in evaluating which method is applied better in slope stability analysis by comparing results of the two methods with those of direct observation on outcrop of slope failures generated. In each slope, results of comparative analysis among geologic and engineering properties are analyzed similarly one another. However, results of orientation analysis in slope 2 are different each other, which indicates orientation of joints in slope 2 depends on persistency and frequency of each joint and also indicates appearance of new joint set with different orientation. Probability density distribution and spacing in slope 3 are high in comparison to those in slope 2 and 3. The reasons are that distribution of psammitic rocks and development of minor folds in slope 3 unlike slope 2 and 3 are closely associated with development of joints. The research data indicate that the square-inventory method predicts more precise failure aspects and is more effective way than scanline survey in analyzing slope stability of the study area.