• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.292-292
• /
• 2013

최근, 자연의 기능성 표면을 모사하여 우리 생활에 응용하기 위한 연구가 활발하다. 초-발수 특성을 가지는 대표적인 예인 연꽃잎은 마이크로-나노 크기의 거친 미세돌기(papillae)를 가지고 있으며 그 위에 낮은 표면 에너지를 가지는 왁스(wax)가 발달 되어 항상 깨끗한 상태를 유지한다. 본 실험에서는 이를 모사하여 RIE (Reactive Ion Etching)방법을 이용하여 기판인 Poly silicon wafer를 Sf6가스를 사용하여 Metal mash로 거칠기를 만들어 주었고, RF-magnetron sputtering 장치를 사용하여 $6{\times}10^{-3}$ Torr의 진공도에서 낮은 표면에너지를 가지는 PTFE (polytetrafluoroethylene)를 증착하여 표면 구조와 발수특성에 대하여 조사하였다. SSME(Surface shape measurement equipment)측정결과 0.24~0.36 um RSa 값이 측정되었고, 12 uL의 Di-water로 접촉각을 측정 한 결과 RIE 10분 처리를 한 기판 위에 PTFE를 3분 증착하였을 때 가장 높은 $153^{\circ}$의 초-발수 특성이 나타났으며, 4주의 시간이 지났을 때에도 접촉각이 유지가 되었다. XPS 측정결과 초-발수 표면에서 나타나는 CF2와 CF3 피크 값이 측정되었다. Reactive Ion Etching을 이용한 PTFE 발수 특성은 방수, 스마트 윈도우, 자가세정(Self-Cleaning), 디스플레이 표시장치, 김서림 방지(Anti-Fogging), 대전방지 코팅 등에 다각적으로 응용 가능할 것이라 사료된다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.33-39
• /
• 2009

Asphalt waterproofing method has a long history over 80years since introduce to domestic market. This method has a good point as high water proofing not permeable to water by material performance of bitumen, In spite of high waterproofing, the application has become decreased. This asphalt method has some problem such as work safety, low workability by complicated work process, environmental problem in job site, it should be solve by complementary measures. 'Therefore, in this paper, suggest the principle of high pressure spray by heat cycle type equipment by analysis of exist problem and materials investigation. And. study and examine the spray type degeneration rubberized asphalt membrane materials to adopt job site. Moreover, suggest the evidence by inspection about waterproofing performance by Korean Industrial Standard through the performance test of the spray type degeneration rubberized asphalt membrane materials.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.9-12
• /
• 2016

본 논문에서는 지진 및 재난상황을 신속하게 대중에게 전파하기 위해 상황실에서의 통제에 따라 정해진 경보방송을 수행하고, 대용량 스피커를 통해 출력할 수 있는 장치를 소개한다. 통신망은 VHF와 위성을 이용하는 이중화로 구성하여 재난발생 시 통신장애에 대한 서비스를 안정화하고, 통신부/제어부/입출력부/앰프부/전원부 등을 유니트로 설계하여 유지보수를 수월하게 할 수 있도록 구성하였다. 야외 환경에서 동작되는 장비는 먼지로부터 보호하고 방수기능이 포함되어 있으므로 밀폐형 함체 내부에 장착된다. 혹한 및 혹서의 날씨에도 장비 운영에 문제가 없도록 장비 내부에 히팅을 하고, 팬을 이용하여 공기 배출을 통해 온도 조절 기능을 수행한다. 배터리를 내장하여 불안정한 상용 전원 공급 조건에서도 안정적으로 운영될 수 있도록 설계하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.715-715
• /
• 2012

계곡, 강 그리고 하구 등 하나의 수계를 대상으로 한 흐름특성은 하상구배, 지질조건, 단면형상, 날씨, 계절변화 등 다양한 인자들에 의존함으로 시시각각 변화하는 유기체로 비유된다. 그러므로 이러한 유기체로 비유되는 수체의 특성규명 연구에는 입체적인 방법을 통한 사상변화에 따른 실시간 조사가 필요하다. 본 연구에서는 수체와 연동하여 3차원적 거동 조사가 가능하도록 '자이로볼'을 고안하였다. '자이로볼'은 탁구공과 같은 크기의 구형으로서 방수처리 된 본체의 내부 중심에 중앙제어부, 최첨단 자이로 센서, 적외선 통신센서, 전원공급부 등을 내장하고, 그 둘레부에는 일정 수심에서의 부력을 제공할 수 있는 부력부로 구성된다. 또한 자이로볼 내부와 별도로 개방 공간부를 설계하여 장치의 수거를 위한 기능을 제공하였다. 개수로에서의 실내실험 결과, 저유속 및 고유속에서의 흐름특성을 적절히 연동하고 있는 재현 결과를 육안으로 확인할 수 있었다.

• Journal of Yeungnam Medical Science
• /
• v.24 no.2
• /
• pp.232-242
• /
• 2007

Background : The safety and efficacy of trabeculectomy with Mitomycin C (MMC) for surgical treatment in aphakic and pseudophaic eyes were retrospectively evaluated. Materials and Methods : The authors reviewed 51 eyes of 45 patients who had been followed up for at least 6 months after trabeculectomy using MMC for aphakic and pseudophakic eyes. The success rate and complications were analyzed. The success criteria included intraocular pressures of 21 mmHg or less with or without glaucoma medications and no loss of light perception. Surgical failure was defined as a postoperative loss of light perception in patients with preoperative vision better than light perception, additional glaucoma surgery, or phthisis bulbi in patients with preoperative vision of no light perception. Results : The average follow up period was 27.7 months and the intraocular pressure was controlled under 21 mmHg in 36 eyes of 51 (70.6%) after the procedure with or without medication for glaucoma. Using the Kaplan-Meier survival analysis, the cumulative success rate at the 3-, 6-, 12-, 24- and 36-month intervals were 98.0%, 94.1%, 91.9%, 83.4% and 75.5%, respectively. The complications observed were hyphema (4 eyes), serous choroidal detachment (4 eyes), hypotony (3 eyes), and endophthalmitis (1 eye). Conclusion : Trabeculectomy using Mitomycin C for the treatment of aphakic and pseudophaic eyes was safe and effective.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.3
• /
• pp.31-35
• /
• 2021

The expansion joints installed on the bridge for the accommodation of expansion and contraction of the supper structure are essential members of the bridge. However, the expansion joints are deteriorated over time and the waterproof function weakens, causing rainwater to penetrate and deteriorate the structure. In order to solve the traffic congestion caused by frequent replacement of the old expansion joints along with the deterioration of the structure, a post-integrated abutment bridge in which the existing expansion joints are removed and replaced with reinforced concrete link connection has been applied to highway bridges since 2016. After the post-integrated abutment method was applied, it was partially applied to bridges in which the superstructure and abutment were jammed. In this study, the causes of problems that may occur when the post-integrated abutment method is applied to the jammed bridge were analyzed numerically. It was analyzed that damage occurred in the link connection part. Based on the results of this study, the application condition for the post-integrated abutment method is reinforced as it is not possible to apply the post-integrated abutment method to bridges are already jammed.

• Fire Science and Engineering
• /
• v.13 no.4
• /
• pp.13-19
• /
• 1999

Currently, conventional fire prevention facility installation standard is based on the use and size of the domestic theaters. In the study, theaters with 1,900 seats were examined to suggest a suitable method to adapt a better fire preventing system. The proposed systems are as follow. - 100% of backup pressed-water outlet device, considering waterproof pressure for fire prevention facility at the top floor. - The supplement of the side wall type header and a large caliber outlet header for stage open sprinkler. - Subdividing a installation rule for special detector and implementing the latestdetector. - Installation of fire curtain for dividing stage area and auditorium area, and also the method of installation of fire curtain.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.730-733
• /
• 2010

The Green Lamp Fixture (GLF) of LED prepared with thin panel structure was investigated for illumination of street lamps and other lighting system uses, which was also very useful to aquaculture and aquafarm lighting uses, or fish luring lights and marine aquanautics of aquamarinautics (aquamarine+aquanautics) uses, etc. In the case of fish luring lights, it was verified that the fish luring of Green Lamp Fixture of LED was very effective for phototaxis movement and ecological community promotion to the micro-living things of organisms and the small fries and fishes, like as 'crowding together'. For the aquaculture lightings, it was also very excellent in waterproof and heat-sink properties, photosynthetic growing of algae and micro-organisms, water-weeds and seaweeds living underwater.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.2
• /
• pp.163-169
• /
• 2014

Engineers in the construction field have been using bonded waterproofing sheets in an attempt to resolve the imbalance in the quality, the risk of fire, safety of workers, and environmental pollution, as well as to eliminate separate use of organic adhesives on the surface of concrete. Recently, self-laminated waterproofing sheets have been developed. The purpose of this research is to find an appropriate processing speed according to the changes in physical properties, and visual observation of the waterproofing sheets laminated by the aluminum thin-film and viscosity layer that can be attached through self-adhesiveness on the surface of concrete and waterproofing sheets. Therefore, this research is conducted using a physical performance test. Based on the result of the test, when the high-frequency inductive heating apparatus was used, an improved adhesion and bonding stability effect were confirmed after the anti-hydrostatic pressure and bond strength in the temperature condition, and the surface observation in the processing speed condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.49-55
• /
• 2017

Most motor cases adopt deep drawing products, which are excellent in waterproof functions, concentricity, right angle, and quality. In addition, the blower motor and seat motor, which are installed in the car interior and do not require waterproof function, adopts a multi-forming manufacturing method. The deep drawing process requires an expensive transfer press that can digest approximately 12 processes, such as drawing, trimming and piercing. On the other hand, products can be produced with low investment because the multi-forming method is composed of one multi-forming machine or one multi-forming machine and one press. The multi-forming machine is a high-priced facility that is mostly imported and a bending / shearing process multi-foaming machine, which was developed by domestic small and medium-sized enterprises, is not enough to reduce the production cost. An integral multi - forming machine is used as a limited working method for thin material and small products. A large product and thick material has a high shear load. A large product and thick material has a high shear load and uses a single crank press. After blanking, the worker manually feeds the material to a multi-forming machine. When the bending operation is performed in the multi-forming machine, it is transferred to the press again to calibrate the dimensions. This variance in work processes has resulted in lower cost competitiveness due to the lower productivity, quality issues, and excessive operator input. The aim of this study was to establish a stable and cost - effective production system through bending / shearing process separation and facility automation.