• The Journal of Korean Society for Radiation Therapy
• /
• v.21 no.2
• /
• pp.89-95
• /
• 2009

Purpose: The purpose is to evaluate efficiency of the CT simulator QA phantom manufactured for daily QA. Materials and Methods: We made holes ($1{\times}100{\times}1\;mm$) to verify accuracy between image and real measurement in polystyrene phantom and made 1 mm holes to verify table movement accuracy at superior and inferior 100 mm to the center of the phantom and inserted radiopacity material. To evaluate laser alignment, we made cross mark on the right and left side at phantom and to evaluate CT number accuracy we made 3 cylindrical holes and inserted equivalence material of bone, water, air in them. After CT scanning the phantom, We evaluated accuracy between image and real measurement, accuracy of table movement, laser, and CT number using exposed image. Results: It was measured that the accuracy between image and real measurement was ${\pm}0.3\;mm$, table movement accuracy was ${\pm}0.3\;mm$, laser accuracy was ${\pm}0.5\;mm$ from 7th January to 7th March in 2008 as within the reference point ${\pm}1\;mm$. In the CT number accuracy of bone was ${\pm}10\;HU$, air was ${\pm}5\;HU$, water was ${\pm}5\;HU$ as within the reference point is ${\pm}10\;HU$. Conclusion: We was able to perform CT simulator QA and laser equipment QA more conveniently and fast using manufactured phantom at the same time. We will be able to make more accurate treatment plan that added to QA procedures using images at previous daily QA.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.4
• /
• pp.522-529
• /
• 2000

Backgrounds : Assessment of the presence and degree of reversibility of airflow obstruction is clinically important in patients with asthma or chronic obstructive pulmonary disease. The measurement of peak expiratory flow(PEF) is a simple, fast, and cheap method to assess the severity of obstruction and its degree of reversibility. Assessing the reversibility of airflow obstruction by peak expiratory flow(PEF) measurements is practicable in general practice, but its usefulness has not been well investigated. We compared PEF and $FEV_1$ in assessing reversibility of airflow obstruction in patients with chronic obstructive pulmonary disease or asthma and developed a practical criterion for assessing the presence of reversibility in general practice. Methods : PEF measurements were performed (Spirometry) in 80 patients(aged 24-78) with a history of asthma or chronic obstructive lung disease before and after the inhalation of 200 g salbutamol. The change in PEF was compared with the change in forced expiratory volume in one second($FEV_1$). Reversible airflow obstruction was analyzed according to American Thoracic Society(ATS) criteria. Results : A 12% increase above the prebronchodilator value and a 200ml increase in either FVC or $FEV_1$ reversibility were observed in 45%(36) of the patients. Relative operating characteristic(ROC) analysis showed that an absolute improvement in PEF of 30 l/min gave optimal discrimination between patients with reversible and irreversible airflow obstruction(the sensitivity and specificity of an increase of 30 l/min in detecting a 12% increase above the prebronchodilator value and a 200ml increase in either FVC or $FEV_1$ were 72.2% and 72.7% respectively, with a positive predictive value of 68.4%). Conclusions : Absolute changes in PEF can be used to diagnose reversible airflow obstruction.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.2
• /
• pp.137-146
• /
• 2006

This is the second of a two-part paper which describes comparison of reliability design methods by application to Donghae Harbor Breakwaters. In this paper, Part 2, we deal with sliding of caissons. The failure modes of a vertical breakwater, which consists of a caisson mounted on a rubble mound, include the sliding and overturning of the caisson and the failure of the rubble mound or subsoil, among which most frequently occurs the sliding of the caisson. The traditional deterministic design method for sliding failure of a caisson uses the concept of a safety factor that the resistance should be greater than the load by a certain factor (e.g. 1.2). However, the safety of a structure cannot be quantitatively evaluated by the concept of a safety factor. On the other hand, the reliability design method, for which active research is being performed recently, enables one to quantitatively evaluate the safety of a structure by calculating the probability of failure of the structure. The reliability design method is classified into three categories depending on the level of probabilistic concepts being employed, i.e., Level 1, 2, and 3. In this study, we apply the reliability design methods to the sliding of the caisson of the breakwaters of Donghae Harbor, which was constructed by traditional deterministic design methods to be damaged in 1987. Analyses are made for the breakwaters before the damage and after reinforcement. The probability of failure before the damage is much higher than the allowable value, indicating that the breakwater was under-designed. The probability of failure after reinforcement, however, is close to the allowable value, indicating that the breakwater is no longer in danger. On the other hand, the results of the different reliability design methods are in fairly good agreement, confirming that there is not much difference among different methods.

• Journal of Christian Education in Korea
• /
• v.66
• /
• pp.75-112
• /
• 2021

This study is purposed to prepare students in theological universities so that they contribute to their faith community as well as the broader social community in future through developing a practical course model for education of character formation. Facing the challenge of a high-tech revolution being progressed globally in this period, theological seminaries as the Christian-affiliated institute of higher education see the necessity to nurture their learners' competency of holistic personality comprehending cognitive, affective, behavioral, and more spiritual maturity as well as specialty in each subject matter. The holistic character capability of seminarians is closely related not only to their own self-realization, but also social community's well-being. This research had the following content and results. Chapter 1 brought up a subject to educational needs of the holistic character formation in the theological seminaries to meet the rapidly changing times. Chapter 2 considered the importance of character formation in the curriculum of the universities and theological seminaries in the times of high-tech revolution through the literature reviews related to. Chapter 3 clarified the elements of character education to be placed emphasis on theological seminaries and established the way of course planning. Chapter 4, using a course of Christian social education for illustration, described in order the whole process of course planning comprehending the need of planning, description of course concept, establishment and definition of learning outcomes, organization of learning experience(course content), teaching-learning activities, evaluation of learning outcome, and course improvement, which was visualized with the chart of the process of course design. Also, it provided a practical illustration of the conceptual map, an outline of content and an organization of units, and scope-sequence chart. Finally, chapter 5 gave an syllabus example in an integrative and digestive form as the course plan to be distributed to the students, which is the final result produced through the whole process of course planning. This research is intended not to present a overall curriculum planning of the university-level in the theological seminaries, but to develop a course-level curriculum focused on the formation of character. The author hope that this study would be used as a guideline in developing a course model to nurture the capability of the learners' holistic character.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.60-69
• /
• 2007

The human eye usually experiences a loss of color sensitivity when it is subjected to high levels of luminance, and perceives a discrepancy in color between high and normal-luminance displays, generally known as a hue shift. Accordingly, this paper models the hue-shift phenomenon and proposes a hue-correction method to provide perceptual matching between high and normal-luminance displays. The value of hue-shift is determined by perceived hue matching experiments. At first the phenomenon is observed at three lightness levels, that is, the ratio of luminance is the same between high and normal-luminance display when the perceived hue matching experiments we performed. To quantify the hue-shift phenomenon for the whole hue angle, color patches with the same lightness are first created and equally spaced inside the hue angle. These patches are then displayed one-by-one on both displays with the ratio of luminance between two displays. Next, the hue value for each patch appearing on the high-luminance display is adjusted by observers until the perceived hue for the patches on both displays appears the same visually. After obtaining the hue-shift values, these values are fit piecewise to allow shifted-hue amounts to be approximately determined for arbitrary hue values of pixels in a high-luminance display and then used for correction. Essentially, input RGB values of an image is converted to CIELAB values, and then, LCh (lightness, chroma, and hue) values are calculated to obtain the hue values for all the pixels. These hue values are shifted according to the amount calculated by the functions of the hue-shift model. Finally, the corrected CIELAB values are calculated from corrected hue values, after that, output RGB values for all pixels are estimated. For evaluation, an observer's preference test was performed with hue-shift results and Almost observers conclude that the images from hue-shift model were visually matched with images on normal luminance display.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.4
• /
• pp.152-163
• /
• 2012

At the conceptual phase of a construction project, estimated construction cost is very important as it significantly influences the owner's decision-making. Accurate cost estimating, in the early stage of a public construction project, serves as a critical factor because initial decision-making effects the final cost of a construction project. However in the cases of Korean public apartment projects, excluding a few of the public owners, there is a problem in properly estimating construction cost due to the lack of construction cost estimating system. Thus, this research developed a public apartment cost estimating system using case-based reasoning that was suggested by a previous research with 66 cases of Korean public apartment projects. Based on the system experiments involving 19 public officers and 10 cases of Korean public apartment projects, the effectiveness of the system in terms of estimation accuracy and user-friendly was confirmed. As a result, the developed system has an error range of 1.47% to 13.74% and mean of 6.15%. In addition, the system was evaluated that it could greatly improve the current estimation task of public officers. Consequently, the results of this research can be used as a foundation for a technological advance in estimating construction cost and improving the accuracy and consistency of construction cost estimation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.28-37
• /
• 2011

With growing concerns about healthy life recently, although the podiatry which deals with the whole area for diagnosis, treatment of foot and leg, and prevention has been widely interested, research in our country is not active. Also, because most of the previous researches in data analysis performed the quantitative approaches, the reasonable level of reliability for clinical application could not be guaranteed. Clinical data mining utilizes various data mining analysis methods for clinical data, which provides decision support for expert's diagnosis and treatment for the patients. Because the decision tree can provide good explanation and description for the analysis procedure and is easy to interpret the results, it is simple to apply for clinical problems. This study investigate rules of item of diagnosis in disease types for adapting decision tree after collecting diagnosed data patients who are 2620 feet of 1310(males:633, females:677) in shoes clinic (department of rehabilitation medicine, Chungnam National University Hospital). and we classified 15 foot diseases followed factor of 22 foot diseases, which investigated diagnosis of 64 rules. Also, we analyzed and compared correlation relationship of characteristic of disease and factor in types through made decision tree from 5 class types(infants, child, adolescent, adult, total). Investigated results can be used qualitative and useful knowledge for clinical expert`s, also can be used tool for taking effective and accurate diagnosis.

• The Journal of the Korea Contents Association
• /
• v.12 no.10
• /
• pp.1-10
• /
• 2012

Many statistical methods have been adapted for terminology recognition to improve its accuracy. However, since previous studies have been carried out in a single core or a single machine, they have difficulties in real-time analysing explosively increasing documents. In this study, the task where bottlenecks occur in the process of terminology recognition is classified into linguistic processing in the process of 'candidate terminology extraction' and collection of statistical information in the process of 'terminology weight assignment'. A terminology recognition system is implemented and experimented to address each task by means of the distributed parallel processing-based MapReduce. The experiments were performed in two ways; the first experiment result revealed that distributed parallel processing by means of 12 nodes improves processing speed by 11.27 times as compared to the case of using a single machine and the second experiment was carried out on 1) default environment, 2) multiple reducers, 3) combiner, and 4) the combination of 2)and 3), and the use of 3) showed the best performance. Our terminology recognition system contributes to speed up knowledge extraction of large scale science and technology documents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.46-55
• /
• 2012

This study proposes an estimate method of willingness to pay(WTP) for real-time route guidance systems using contingent valuation method(CVM) under double bounded dichotomous choice question(DBDCQ) and analysis for impact factors of WTP estimation. This study assumed that provided real-time traffic information service is optimal route concepts dealing with traffic conditions on origin-destination. Analysis targets were classified into two groups as short distance path and middle distance path for estimating WTP for realtime route guidance system in a year using the survival analysis method and the regression model with personal information, actual condition and satisfaction of information usage and users' awareness and usage of facilities. As a result, mean WTP of realtime route guidance system is 4,034won/year in short distance path, and 4,884won/year in middle distance path. Therefore real-time route guidance system for longer distance path is recognized as more valuable than shorter distance path. Moreover, the necessity of information was required on a higher income group and higher WTP was estimated on owners of vehicle group and lower awareness of a route group.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.3
• /
• pp.127-134
• /
• 2016

Land suitability assessment for apples and pears was conducted with soil and climate information in South Korea. In doing so, we intended to preserve land and increase the productivity by providing valuable information regarding where more suitable areas for apples or pears are located. We used soil classification driven by soil environmental information system developed by National Institute of Agricultural Science, RDA, and also used climate classification in digital agro-climate map database for which is made by National Institute of Horticultural and Herbal Science. We combined both soil and climate classification results using a most-limiting characteristic method. The combined results showed very similar patterns with the results by classification based on soil information. Such results seem to come from the fact that the classification results by soil relatively lower than those by climate information. The results by soil classification seem to be too downgraded and checking if the final classification ranges in soil are reasonably made is strongly required. Although the most limiting characteristic method had been used widely in land suitability assessment, adapting the method based on results by soil and climate can be influenced by one downgraded factor. Therefore, alternative ways should be carefully considered for increasing the accuracy.