• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.11-16
• /
• 2005

This study is for the insulation construction of inner wall in a bathroom facing on the outside in the housings. This new dry construction method can be constructed by a dry panel which is bonded tiles on the extruded and expanded poly-ethylene panel in stead of the existing wet construction method. Compared to the existing method, this panel is light movably and is constructed simply. These representative construction merits are getting wide span in a bath due to reducing wall thickness and saving construction period.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.221-222
• /
• 2016

The replacement ratio of waste EPS was varied, and its effect on compressive strength and absorption capacity was investigated. According to the experimental results, The 28th day compressive strengths for the W/C 50% specimens were 17.5~21.2MPa, which was relatively low compared to the 13.6~22.2MPa of the W/C 70%.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.1
• /
• pp.79-85
• /
• 1999

Use of soils with crushed expanded polystyrene(EPS) satisfied both recycling of industrial waste and development of new light-weight fill materials. Objectives of the study were to make the mixed the mixed soils with the crushed EPS and to suggest the most rational mixing ration as a fill material. A series of laboratory tests was performed to investigate the relationship between miximum dry density and optimum moisture contenr and to find the variation of CBR for mixtures with 3 soils and 2 sizes of the crushed EPS. Results of the test showed that the sizes fo the curshed EPS had a little effect on the properties of mixed soils. But gradatiion of soils and mixing ration with the crushed EPS were important factors to characterize compaction properties of the mixed soils.

• Journal of Korea Foundry Society
• /
• v.5 no.3
• /
• pp.47-51
• /
• 1985

FMC(FULL MOLD CASTING)법(法)이란 발포 polystyrene모형을 사용하여 조형후, 주형으로부터 모형을 발형치 않은채, 용탕을 주입하여 주물을 제조하는 방법을 말한다. 합성수지 발포체를 주조용(用) 모형의 재료로써 사용하는 방법은 1956년 미국의 슈로이어(H. F. Shroyer)에 의하여 발명되었으나 이것은 실제 주조에 응용하기에는 여러 곤란한 문제가 있어, 단순히 착상에 그치고 공업적으로 적용할 수 있는 기술을 확립치는 못하였다. 그후 서독 아헨대학교수로서 당시 발포폴리스티렌을 포함하는 각종단열재 제조회사 G+H 사(社)의 A. Wittmoser에 의하여 1962년에 처음으로 공업적으로 이용되어, 현재 서독, 미국, 일본등 유럽전역에서 응용되고 있다. 당사(當社)는 1977년6월 5일 첫 가동된 이후, 동(同)그룹 사(社)인 현대자동차로부터 자동차금형 (Press Die)주조를 FMC법(法)으로 생산하여 달라는 요구를 받고, 그해 12月부터 개발시험에 착수하여 이듬해 6월(月)부터 본(本) FM주조를 적용하여왔다. 그러나 1) 폴리스티렌 모형의 주입시(時) 부(不)기화 잔유물에 의한 주물표면결함 2) 도형제 박리 현상에 의한 표면결함 3) 주입시(時) 다량의 매연발생 및 4) 조형시(時) 모형의 변형에 의한 칫수결함 등의 문제가 대두되어 품질면에서는 1982년6월(月)에 와서야 어느정도 정상궤도에 도달하여 본격적인 FM 생산을 해오고 있는 중이다. 여기서 그동안 당사가 경험한 대형주물 (자동차금형:$1{\sim}10$톤/개)에 있어서의 FM 주조법의 적용사례를 본지(本誌)를 통하여 간단히 소개하고자 한다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.4
• /
• pp.85-94
• /
• 2004

Waste wood-plastic composite panels are made on different hot press molding conditions, and tested for apparent density, water absorption, expansion in thickness and flexural strength. From the test results, regardless of molding temperature and molding time, the apparent density of the composite panels is increased with an increase in the molding pressure, while their water absorption is decreased with an increase in the molding pressure. The flexural strength of the composite panels is markedly increased with increasing molding pressure, molding temperature and molding time, and tends to become nearly constant at a molding temperature of $120^{\circ}C$ and a molding time of 15min.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.527-536
• /
• 2023

This research embarked on a comprehensive examination of the engineering characteristics of lightweight concrete intended for implementation in rhamen-type modular building walls. The concrete was formulated utilizing bottom ash and coated EPS beads, in accordance with the Korea Construction Standards Center(KCS) 14 20 20 "Lightweight Aggregate Concrete". Our findings articulate that while EPS beads tend to diminish the compressive strength of the lightweight concrete, they concurrently contribute to a notable reduction in unit mass. The porous nature of the bottom ash endows the material with diminished thermal conductivity. Significantly, a mixture containing 50% EPS beads and 50% BA20 aggregates, replacing half of the coarse aggregates, was found to meet the standard specifications.

• 환경사랑
• /
• s.48
• /
• pp.7-7
• /
• 2007

국립수산물품질검사원은 수산물의 상품성 향상과 유통효율 제고 및 공정한 거래 실현을 위한 수산물표준규격을 지난 1월 22일 고시한 바 있다. 고시는 어종의 표준거래단위, 수산물의 포장치수, 포장재료 및 포장재료의 시험방법 등을 규정하고 있다. 고시에 따르면 포장재료는 식품위생법에 따른 용기.포장의 제조방법에 관한 기준과 그 원재료에 관한 규격에 적합하여야 한다. 고시 된 표준포장규격과 포장재료 중 P.S.대(폴리스티렌대)의 규격은 아래와 같다

• The monthly packaging world
• /
• s.199
• /
• pp.102-103
• /
• 2009

환경부는 "제품의 포장재질 포장방법에 관한 기준 등에 관한 규칙"을 개정함에 있어 분말 세제류에 대한 포장공간비율을 합리적으로 조정하고, 합성수지 재질 포장재 연차별 줄이기 대상에서 소형 가전제품의 발포폴리스티렌 재질 포장용 완충재가 제외되는 시행령 개정내용(안)을 반영하고자 다음과 같이 공고했다.

• The monthly packaging world
• /
• s.6
• /
• pp.46-51
• /
• 1993

최근 대표적인 완충재로 사용되어 오던 EPS(발포폴리스티렌)의 사용이 규제됨에 따라 환경적응형 완충재의 중요성이 더욱 강조되고 있다. 완충재는 수송시 제품에 가해지는 충격을 줄여 제품을 최대한 보호하는 역할을 한다. 일반적으로 사용되고 있는 플라스틱 완충재로는 폴리에틸렌 폼(polyethylene foam), 폴리프로필렌 폼(polypropylene foam), 폴리우레탄 폼(polyuretane)등이 있고 종이를 소재로 한 형태도 있다. 이 글에서는

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.910-913
• /
• 2001

Rapid Prototyping(RP) techniques have unique characteristics according to their working principle: the stair-stepped surface of a part due to layer-by-layer stacking, low building speed, and additional post-processing to improve surface roughness. A new RP process, Variable Lamination Manufacturing by using expandable polystyrene foam(VLM-S), has been developed to overcome the unfavorable characteristics. The objective of this study is to investigate the thermal characteristics and skeleton size effects as the hotwire cuts EPS foam sheet in order to improve dimensional accuracy of the parts, which is produced by VLM-S. Empirical and analytical approaches are performed to find the relationship between cutting speed and heat input, and the relationship between maximum available cutting speed and heat input. In addition, empirical approaches are carried out to find the relationship between cutting error and skeleton size, and cutting deviation and skeleton size. Based on these results, the optimal hotwire cutting condition and available minimum skeleton size are derived. The outcomes of this study are reflecting in the enhancement of VLM-S input data generation S/W.