• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.1 no.1
• /
• pp.29-37
• /
• 1995

The purpose of this study was to development the waxed rice straw pulp tray(WRSPT) which had low water sensitivity. The quality changes of mushrooms(Agaricus bisporus) packaged respectively in the WRSPT, non-treated rice straw pulp tray(NRSPT) and expanded polystyrene tray(EPST) were observed during storage. The weight losses of mushrooms in the WRSPTs were less than in the NRSPTs by maintaining below 3% at $0^{\circ}C$ and the applications of WRSPTs were more effective at $20^{\circ}C$. The weight increases of WRSPTs were more lowered than those of NRSPTs by marking below 15% during storage at $0^{\circ}C$. There were no significant differences in the Hunter L values and hardness values of mushrooms in the three types of trays at $0^{\circ}C$. The cap openings of mushrooms were more proceeded in NRSPTs than in WRSPTs and EPSTs at $20^{\circ}C$. As a result, it may be favorable to control excessive moisture absorption of the NRSPT mainly composed of cellulose pulp by introducing such chemical treatments as wax treatment.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.353-357
• /
• 1995

The purpose of this study was to evaluate the possibility of the laboratory-made rice straw pulp tray(RSPT) for mushroom(Agaricus bisporus) pre-packaging. The quality changes of mushrooms packaged respectively in the RSPT and 'commercial' expanded polystyrene tray(EPST) were observed during storage. The weight losses of mushrooms in the two types of trays were maintained below 5% and the Hunter L values were showed above 76 at $4^{\circ}C$, while mushrooms in RSPTs had better lightness than those in EPSTs during storage at $25^{\circ}C$. There were no significant differences in the hardness values and cap openings between mushrooms in the two types of trays at $4^{\circ}C$. The cap openings of mushrooms were more proceeded in RSPTs than in EPSTs at $25^{\circ}C$ and the weight increases of RSPTs were greater than those of EPSTs during storage at $4^{\circ}C,\;25^{\circ}C$. As a result, it may be favorable to apply the environmentally-friendly RSPT to mushroom pre-packaging under the condition of low storage temperature.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.21-22
• /
• 2018

Foamed concrete is a porous concrete that is cured by mixing bubbles into cement slurry. It is lighter than ordinary concrete and is characterized by higher insulation. Lightweight foamed concerte is mainly used as a sandwich panel in Korea, and is also used as a refractory filler in fireproof safes. Studies on lightwight foamed concrete have been carried out on strength,density and thermal conductivity. However, it is confirmed that the research on the fire resistance performance is very limited. Based on this study, fire resistance of lightweight foamed concrete using expanded polystyrene beads is investigated.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.210-217
• /
• 2023

Various performances of ultra-high performance concrete (UHPC) applied with microplastics and expanded polystyrene (EPS) beads were evaluated. CompressIve and flexural strength, performance after ignition, flow-down in fresh state, and effective bond strength were evaluated. Designed weight of the cement panel with these mixtures was calculated based on the flexural strength. As a result of the experiments, it was confirmed that the EPS could reduce the density of UHPC with largest range. By maximum addition of EPS beeds, the density of UHPC decreased to 1300 kg/m³, and the compressive and flexural strengths for this mixtures were in ranges of 20-30 MPa and 15-20 MPa, respectively. On the other hand, lightest cement panel could be designed with UHPC having a density ranges about 2.0 g/cm³.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.497-500
• /
• 2008

Polystyrene foam (styrofoam) was treated with low-temperature oxygen plasma by means of immobilization and grafting techniques in order to modify its hydrophobic surface property to hydrophilic one using hydrophilic monomers of acrylic acid and acrylamide, and its surface chemical structure, morphology, and hydrophilicity were examined by ESCA, field emission scanning electron microscope (FESEM), and contactangle meter. The experimental evidences, such as the increases of O/C and N/C ratios in ESCA spectrum, thin film deposition, decrease in contact-angle, strongly suggested that the plasma treatments were useful methods for the preparation of hydrophilic surface. Contact angle diminished drastically from $84^{\circ}$ to $18{\sim}19^{\circ}$. Acrylamide, compared to acrylic acid, appeared to play a decisive role, and to be more powerful agent for improving its surface hydrophilicity.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.127-136
• /
• 2001

To increase the structural integrity of concrete box culvert good compaction by the dynamic compaction roller with bi9 capacity is as effective as good backfill materials. It is needed for effective compaction that a compaction roller closes to concrete structure with high frequency. However structural distress of the culvert could be occur due to the excessive earth pressure by great dynamic compaction load. To investigate the characteristics of Induced stress by compaction, a box culvert was constructed with changing cushion materials and compaction methods. Two types of cushion material such as tire rubber chip and EPS(Expanded Polystyrene) were used as cushion panels and they are set on the culverts before backfill construction. Laboratory test result of cushion material says that the value of dynamic elastic modulus of rubber is lesser than that of EPS. On the other hand, material damping of rubber material is greater than that of EPS. In most case, dynamic compaction rollers with 10.5 ton weights were used and vibration frequency was applied 30Hz for the great compaction energy. This paper presents the main results on the characteristics of dynamic earth pressures during compaction. The amounts of induced dynamic pressures$(\Delta\sigma\;h)$ by compaction are affected with construction condition such as compaction frequency, depth of pressure cell, distance between roller and the wall of culvert and roller direction. Based on the measured values dynamic lateral pressure on the culverts, it could be said that orthogonal direction of roller to the length of culvert is more effective to compaction efficiency than parallel direction.