• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.93-100
• /
• 2011

Maintenance of adequate soil water potential during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil water movement within and below the rooting zone can facilitate optimal irrigation scheduling aimed at minimizing the adverse effects of water stress on crop growth and development and the leaching of water below the root zone which can have adverse environmental effects. The objective of this study was to evaluate the feasibility of using a portable irrigation controller with an Watermark sensor for the cultivation of drip-irrigated vegetable crops in a greenhouse. The control capability of the irrigation controller for a soil water potential of -20 kPa was evaluated under summer conditions by cultivating 45-day-old tomato plants grown in three differently textured soils (sandy loam, loam, and loamy sands). Water contents through each soil profile were continuously monitored using three Sentek probes, each consisting of three capacitance sensors at 10, 20, and 30 cm depths. Even though a repeatable cycling of soil water potential occurred for the potential treatment, the lower limit of the Watermark (about 0 kPa) obtained in this study presented a limitation of using the Watermark sensor for optimal irrigation of tomato plants where -20 kPa was used as a point for triggering irrigations. This problem might be related to the slow response time and inadequate soil-sensor interface of the Watermark sensor as compared to a porous and ceramic cup-based tensiometer with a sensitive pressure transducer. In addition, the irrigation time of 50 to 60 min at each of the irrigation operation gave a rapid drop of the potential to zero, resulting in over irrigation of tomatoes. There were differences in water content among the three different soil types under the variable rate irrigation, showing a range of water contents of 16 to 24%, 17 to 28%, and 24 to 32% for loamy sand, sandy loam, and loam soils, respectively. The greatest rate increase in water content was observed in the top of 10 cm depth of sandy loam soil within almost 60 min from the start of irrigation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.421-435
• /
• 2017

Recently, due to the saturation of ground structures and the overpopulation of pipeline facilities requires to development of underground structures as an alternative to ground structures. Thus, mechanized tunnel construction of the shield TBM method has been increasing in order to prevent vibration and noise problems in construction of the NATM tunnel for the urban infrastructure construction. Tunnel construction plan for the tunnel line should be formed in a sharp curve to avoid building foundation and underground structures and it is inevitable to develop a shield TBM technology that suits the sharp curve tunnel construction. Therefore, this study is about the structural stability technology of the articulation jack, shield jack and skin plate for the shield TBM thrust in case of the mechanized tunnel construction that is a straight and sharp curve line. The construction case study and shield TBM operation principle are examined and analyzed by the theoretical approach. The torque of the cutter head, the thrust of the articulation jack and the shield jack, the amount of over cutting for curve is important respectively in shield TBM construction of straight and sharp curve line. In addition, it is very important to secure the stability of the skin plate structure to ensure the safety of the inside worker. This study examines the general structure and construction of the equipment, experimental simulation was carried out through numerical analysis to examine the main factors and structural stability of the skin plate structure. The structural stability of the skin plate was evaluated and optimizes the shape by comparing the loads of the articulation jack by selecting the virtual soil to be applied in a straight and sharp curve line construction. Since the present structure and operation method of the shield TBM type in domestic constructions are very similar, this study will help to develop the localized shield TBM technology for the new equipment and the vulnerability and stability review.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.189-203
• /
• 2008

The physical and chemical properties of radioactive waste drums, which have been temporarily stored on site, should be characterized before their shipment to a disposal facility in order to prove that the properties meet the acceptance guideline. The investigation of NDT(Nondestructive Test) method was figured out that the contents in drum, the quantitative analysis of free standing water and void fraction can be examined with X-ray NDT techniques. This paper describes the characteristics of X-ray NDT such as its principles, the considerations for selection of X-ray system, etc. And then, the waste drum characteristics such as drum type and dimension, contents in drum, etc. were examined, which are necessary to estimate the optimal X-ray energy for NDT of a drum. The estimation results were that: $(R)\acute{A}$ the proper X-ray energy is under 3 MeV to test the drums of 320 ${\beta}\S$ and less; $(R)\ddot{E}$ both X-ray systems of 450 keV and/or 3 MeV might be needed considering the economical efficiency and the realization. The number of drums that can be tested with 450 keV and 3 MeV X-ray system was figured out as 42,327 and 18,105 drums (based on storage of 2006. 12), respectively. Four testing scenarios were derived considering equipment procurement method, outsourcing or not, etc. The economical and feasibility assessment for the scenarios was resulted in that an optimal scenario is dependent on the acceptance guide line, the waste generator's policy on the waste treatment and the delivery to a disposal facility, etc. For example, it might be desirable that a waste generator purchases two 450 keV mobile system to examine the drums containing low density waste, and that outsourcing examination for the high density drums, if all NDT items such as quantitative analysis for 'free standing water' and 'void fraction', and confirmation of contents in drum have to be characterized. However, one 450 keV mobile system seems to be required to test only the contents in 13,000 drums per year.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.694-699
• /
• 2008

Considering the severe regulation associated with sludge treatment such as direct landfill and ocean dumping, there is no doubt in that an advanced study for the proper treatment of sludge is urgently needed in near feature. As one of viable method for sludge treatment, fry-drying of sludge by waste oil has been investigated in this study. The fundamental mechanism of this drying method lies in the phenomenon of rapid moisture escape in the sludge pore toward oil media. This is caused by the severe pressure gradient formed by the rapid oil heating between sludge and oil. As part of research effort of fry-drying using waste oil, a series of basic study has been made experimentally to obtain typical drying curves as function of important parameters such as drying temperature, drying time, oil type and geometrical shape of sludge formed. Based on this study, a number of useful conclusion can be drawn as following. The fry-drying method by oil immersion was found quite effective in the removal efficiency of sludge moisture, in general, the moisture content decreases significantly after 10 minutes and the whole moisture content was less than 5% after 14 minutes regardless of the drying temperature. The increase of oil temperature up to 140$^{\circ}C$ favors significantly for the removal of moisture but there was no visible difference above 140$^{\circ}C$. As expected, the decrease of diameter in sludge was efficient in drying due to the increased surface area per unit volume. Further, the effect of oil property by the change of oil type was noted. To be specific, for the case of engine oil the efficiency was found to be remarkably delayed in moisture evaporation compared with that of vegetable oil due to the increased viscosity of engine oil. It produced a result of increasing the evaporation of moisture largely relatively high in the drying temperature over 140$^{\circ}C$ compared with the drying temperature 120$^{\circ}C$ drying temperature as the drying time passed. Accordingly, the drying temperature is considered desirable as keeping over 140$^{\circ}C$ regardless of a sort of used oil.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.526-539
• /
• 2007

The purpose of this study is to investigate the influence of the Korean Wave on Chinese tourism to South Korea through a behavioral analysis of Chinese tourists in the general group package tours. China suppressed the needs of the Chinese people's geographical movement and imposed restrictions on information about the outside world with the use of a policy of "closure" for a long time. But since reforms and open-door policies were introduced in China, especially in the context of relaxation of control policies over Chinese outbound tourism after the mid-1990's, more and more Chinese make trips abroad including visits to South Korea. In this situation, the recent Korean Wave(especially, drama/film) describes the Korean national image by forming a bridge between fiction and reality and plays a pivotal role in broadening or reconstructing the geographical imagination of the Chinese people who have been historically isolated from the outside world. Although Chinese have imagined the Korean nationscape on the basis of geopolitical or economic factors in the past, they have currently broadened or reconstructed their geographical imagination to include socio-cultural factors related closely to the Korean way of life due to the recent Korean Wave. This newly constructed geographical imagination led by the Korean Wave functions as an important pulling factor in Chinese destination choices, affecting Chinese tourists' motivation formation and the recommendation of main attractions. The more influential the Korean Wave is on their destination choice, the more the respondents select the cultural factors in both their motivation for tourism to South Korea and their recommendations of tourism attractions to other people. Through the analysis results of both satisfaction and intention to revisit, the more influential the Korean Wave is on their destination choice, the higher is the degree of both satisfaction and intention to revisit. In other words, although Chinese tourism to South Korea is chiefly in the general group package tours, Chinese tourists who are influenced by Korean Wave on their destination choice have more attachment to(or affection for) Korea as a tourism destination. This result suggests that the Korean Wave affects qualitative change - that is, change of attitude - as well as quantitative change in Chinese demand for tourism to South Korea.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.540-559
• /
• 2007

The purpose of this paper is to analyse the locations and to interpret the landscapes of the local towns in Joseon Dynasty from Feng-shui's point of view. As a result of analysing the locations of towns in Gyeongsang Province, the towns which have typical Feng-shui landscapes make up to 58% of the total. Historically, the local towns that were established in the early period of the Joseon Dynasty didn't reveal Feng-shui's landscape, but those that were established in the late period of the Joseon Dynasty revealed the Feng-shui's landscape clearly. In this article, I classify the local towns of the Gyeongsang Province into 3 types: 1. Non Feng-shui type These towns are located near the seashore. The main reason that these towns were located at the seashore was defense against an enemy. 2. Semi Feng-shui type. These towns don't have natural location but have a man-made landscape, based on the principles of Feng-shui. 3. Typical Feng-shui type. These towns were typically administrational towns which were located at the center of a local region.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.582-600
• /
• 2007

In a long history of geography, a variety of regional concepts have been suggested to represent the particular situations in each period. Today, post-modem situations, characterized by the development of capitalism and globalization, demand a new variety of regional concepts. The regional characteristics, such as social relations, institutional systems, ideologies and symbolism, are now perceived basically on the level of subjectivity. Currently, it is the most urgent task to integrate many conflicting opinions among a variety of subjects into the one that would seek a voluntary consent from the majority of regional residents. In this paper, it is suggested that the concept of identity is the most efficient in examining and explaining the post-modem trend of a region: variability, subjectivity, mobility, changeability, Finally, it is suggested that a special attention should be paid to the role of institutions, that is institutionalization, in the construction of regional identity, to understand and interpret the cultural-historical aspect of a regional change.

• Journal of Oral Medicine and Pain
• /
• v.33 no.1
• /
• pp.41-48
• /
• 2008

The focus of this study is to analyze the effect of stress on the health of bruxism patients using the MBTI system. The most common personality type will be identified among the bruxism patients and by understanding their personality & their handling of stress, more comprehesive and effective treatment plan can be constructed. The study will also conclude that the type of personality has big effect on the cause of bruxism, and that this will be considered in the treatment plan in this hospital. The result of the study is as follow. First, more bruxism patients were type I than type E. It can be suggested that this result is due to the introversive people maintaining their energy how within themselves, and private are less to likely to release there stress than the expressive people. Second, among the bruxism patients significantly more type T were found compared to type F. This implies the bruxism tend to follow principals, scientific and analysing during decision making rather than basing their decision an meanings, emotions and influences. Thirdly, more bruxism patients clarified into ST in comparison to non-bruxism patients. This is thought to be due to probable increased stress and anxiety following ST people's tendency to more strict and realistic thinking according to effectiveness, evidence-based and productivity. Fourth, the type IJ was the most of the bruxism patients. We can come to the conclusion that decision-oriented introversion people who have hard to change, a thoroughgoing preparation characters are likely to grind their teeth by their detailed characters. Fifth, the type IT was the most of the bruxism patients. Bruxism patients are usually influenced by spirit, easily hearted, awed of relationship and attention. So, their intensity of stress is much bigger because of their personality. The last, Type IS was the most of the bruxism patients. It means that introvert sensitive types who have characters of calm, passive but defence to other's emotion, also neutral, keep moderation, and have cold-heartedness are likely to grind their teeth frequently. In conclusion it is evident that bruxism patients have particular personality types. Precisive, analysing and introversive bruxism patients are expected to have higher sensitivities to stress.

• Management & Information Systems Review
• /
• v.31 no.2
• /
• pp.41-59
• /
• 2012

ERP is a new technique of process innovation. It indicates enterprise resource planning whose purpose is an integrated total management of enterprise resources. ERP can be also seen as one of the latest management systems that organically connects by using computers all business processes including marketing, production and delivery and control those processes on a real-time basis. Currently, however, it's not easy for local enterprises to have operators who will be in charge of ERP programs, even if they want to introduce the resource management system. This suggests that it's urgently needed to train such operators through ERP education at school. But in the field of education, actually, the lack of professional ERP instructors and less effective learning programs for industrial applications of ERP are obstacles to bringing up ERP workers who are competent as much as required by enterprises. In ERP, accounting is more important than any others. Accountants are assuming more and more roles in ERP. Thus, there's a rapidly increasing demand for experts in ERP accounting. This study examined previous researches and literature concerning ERP education, identified problems with current ERP education at college and proposed how to solve the problems. This study proposed the ways of improving ERP education at college as follows. First, a prerequisite learning of ERP, that is, educating the principle of accounting should be intensified to make students get a basic theoretical knowledge of ERP enough. Second, lots of different scenarios designed to try ERP programs in business should be created. In association, students should be educated to get a better understanding of incidents or events taken place in those scenarios and apply it to trying ERP for themselves. Third, as mentioned earlier, ERP is a system that integrates all enterprise resources such as marketing, procurement, personnel management, remuneration and production under the framework of accounting. It should be noted that under ERP, business activities are organically connected with accounting modules. More importantly, those modules should be recognized not individually, but as parts comprising a whole flow of accounting. This study has a limitation because it is a literature research that heavily relied on previous studies, publications and reports. This suggests the need to compare the efficiency of ERP education between before and after applying what this study proposed to improve that education. Also, it's needed to determine students' and professors' perceived effectiveness of current ERP education and compare and analyze the difference in that perception between the two groups.

• Journal of Korea Soil Environment Society
• /
• v.2 no.3
• /
• pp.3-21
• /
• 1997

The remediation of contamiated sites using currently available remediation technologies requires long term treatment and huge costs, and it is uncertain to achieve the remediation goal to drop contamination level to either back-ground or health-based standards by using such technologies. Intrinsic remediation technology is the remediation technology that relies on the mechanisms of natural attenuation for the containment and elimination of contaminants in subsurface environments. Initial costs for the intrinsic remediation may be higher than conventional treatment technologies because the most comprehensive site assessment for intrinsic remediation is required. Total remediation cost, however may be the lowest among the presently employed technologies. The applicability of intrinsic remediation in the contaminated sites should be theroughly investigated to achieve the remedial goal of the technology. This paper provides the frame of the extended site assessment procedure based on knowledge of biodegradability to evaluate the applicability of intrinsic remediation. This site assessment procedure is composed of 5 steps such as preliminary site screening, assessment of the current knowledge of biodegradability, selecting the appropriate approach, analyzing the contaminant fate and transport and planning the monitoring schedule. In the step 1, followings are to be decided 1) whether to go on the the detailed assessment or not based on the rules of thumb concerning the biodegradability of organic compounds, 2) which protocol document is selected to follow for detailed site assessment according to the site characteristics, contaminants and the relative distance between the contamination and potential receptors. In the step 2, the database for biodegradability are searched and evaluated. In the step 3, the appropriate biodegradability pathways for the contaminated site is selected. In the step 4, the fate and transport of the contaminants at the site are analyzed through modeling. In the step 5, the monitoring schedule is planned according to the result of the modeling. Through this procedure, users may able to have the rational and systematic informations for the application of intrinsic remediation. Also the collected data and informations can be used as the basic to re-select the other remediation technology if it reaches a conclusion not to applicate intrinsic remediation technology at the site from the site assessment procedure.