• Journal of the Korean GEO-environmental Society
• /
• v.2 no.2
• /
• pp.23-32
• /
• 2001

A soil wall reinforced by soil nailing is excavated in the typical soil conditions which are consisted of weathered soil, weathered rock and soft rock. The resulting nail loads computed are compared to loads measured by utilizing strain gauges during construction. The wall deflection at two locations are related to construction events and specific soil conditions, providing an understanding of the behavior of soil nailed walls. The load distribution along the nail indicated relatively high loads close to the wall. The mobilized load on the nail is proportional to the wall deflection showing the maximum value at the surface of the wall. The construction monitoring for this project provided valuable information in understanding the behavior of soil nailed walls.

• Journal of the Korean Geosynthetics Society
• /
• v.2 no.1
• /
• pp.15-25
• /
• 2003

This paper presents the results of instrumentation of a two-level of soil-reinforced segmental retaining wall. Instrumentation items include the lateral wall displacements and the geogrid strains at several locations. The instrumentation is still long carried in order to examine long-term behavior. The result indicate that the upper wall has a significant effect on the behavior of the lower wall doubling the wall moved. The wall also exhibits significant post-construction movements that had ceased several months after the wall completed. The implication of the findings from this study was discussed in great detail.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.3
• /
• pp.43-54
• /
• 2005

The ground movements during three. full-scale trial diaphragm wall (DW) panel constructions were monitored and analysed. The DW panels were constructed in reclaimed fill where sedimentary marine deposit and residual weathered soils are being consolidated. The monitoring data showed exceptionally large lateral ground movements of up to 293 mm near a trench due to the DW panel constructions, which is about 0.8$\%$ D, where D is the maximum excavation depth. It was observed that deliberate holding period of the trench resulted in a significant increase in the lateral ground movements of about 50-225$\%$. A pre-treatment of the marine deposit by installing a single line of jet grout columns around the trench prior to the excavation was found to be a very effective way of reducing the ground movements. The measured ground settlements were compared with some relevant case histories. DW panel constructions in sedimentary marine deposit are likely to cause maximum ground surface settlement up to 0.225$\%$ D.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.45-52
• /
• 2010

One of the ways to minimize damage by a slope collapse is to set up preventive measures in advance by measuring displacements in a slope and predicting a collapse. There have been many different technologies developed to predict a collapse with diverse measuring equipment. Especially recently, attempts have been made to utilize terrestrial LiDAR, a high-tech imaging equipment to measure displacements on a scope. Terrestrial LiDAR generates three-dimensional information about an object with millimeter-level accuracy from hundreds of meters away and has been used in an array of fields including restoration of cultural assets, three-dimensional modeling, and making of topographic maps. In recent years, it has been used to measure displacements in structure as well. This study monitored displacements in slopes of high collapse risk with terrestrial LiDAR. As a result, it was able to confirm the applicability of terrestrial LiDAR to the field, and proposed monitoring methods.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.223-233
• /
• 2003

Sand compaction pile (SCP) is one of the ground improvement techniques which are being used for not only accelerating consolidation but also increasing bearing capacity of loose sands or soft clay grounds. In this study, laboratory model tests and 3-D finite element analyses were performed to investigate the interaction between sand compaction piles and surrounding soft soils. Based on the results obtained, as the area replacement ratio increases, the stress concentration ratio increases at the pile point, the settlement decreases, and the relative displacement between column and soil also decreases. It is also found that numerical study is illustrated by good comparison with model test results, and the numerical analysis revealed slip effects which could not be specifically identified in the model tests.

• Journal of Oral Medicine and Pain
• /
• v.25 no.3
• /
• pp.305-313
• /
• 2000

이 연구의 목적은 악관절 내장증 환자에서 관절원판의 형태를 자기공명영상사진으로 평가하고 임상적 증상과의 관계를 알아보고자 하는 것이다. 악관절 내장증의 증상을 가진 90명의 환자에서 169개의 관절을 자기공명영상사진으로 관절원판과 하악과두의 관계를 기준으로 정상군, 정복성 관절원판 변위군, 비정복성 관절원판 변위군으로 분류하고 관절원판의 형태를 5가지로 나누었다. 임상검사는 측두하악관절통과 관절음의 유무를 확인하여 그 상관관계를 알아보았다. 실험 결과에서 측두하악관절통은 각 군에서 관절원판의 형태와는 정상군을 제외하고는 통계적인 유의성이 없었으며, 염증성 삼출액과 유의한 관계를 보였다. 관절음은 정복성 관절원판 변위환자에서 관절원판형태와 통계적으로 유의성을 보였으며, 비정복성 관절원판 변위환자에서도 상당수 관절음이 발생하였음을 알 수 있었다. 이 결과는 측두하악관절의 통증은 관절원판의 형태가 많이 변형될수록 통증이 심해지는 경우가 많았지만, 다른 여러 가지 원인들이 존재할 수 있으며, 관절음은 정복성 관절원판 변위환자에서 관절원판의 변형이 심할수록 관절원판이 정복할 때 발생될 수 있다는 것을 의미한다. 따라서, 임상적인 검사와 더불어 자기공명영상사진으로 정확한 진단을 함으로써 관절원판 변위의 적절한 치료가 행해질수 있으리라 생각된다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.2
• /
• pp.87-99
• /
• 2023

Ground excavation inevitably causes ground displacement of adjacent ground, and structures and facilities exposed to ground displacement may suffer various damages. Therefore, in order to minimize the damage and damage to adjacent structures and facilities caused by excavation, ground displacement (settlement and horizontal displacement) in the adjacent ground caused by excavation must first be predicted. There is many ground displacement information induced by general braced cut excavation, but the information is not enough for circular shaft excavation. This study aims to provide information on the estimation of ground settlement caused by circular shaft excavation through the case analysis of circular shafts and comparison with braced cut excavation. From this study, it was found that the use of the settlement criterion of braced cut excavation as the settlement management criterion for circular shaft excavation is a conservative approach in terms of safety. But when considering the economic aspect, it may result in overdesign of the wall and therefore, a more reasonable settlement criterion can be needed for circular shaft excavation.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.11
• /
• pp.37-45
• /
• 2010

In this study, the value of numerical analysis was compared to the measured value of horizontal displacement during construction. And also, the value was reviewed by comparing with numbers calculated by SUNEX program and EXCAV program. When comparing to suggested values of the maximum horizontal displacement in clayey layer, the displacement caused by the IPS system is larger than one by the Strut girder type system. When comparing the result of SUNEX program to that of EXCAV program, the SUNEX program interprets larger value. It could be concluded the result of SUNEX program is closer to the suggested value, 0.5%H, in clayey layer. The result also shows that the internal friction angle(${\Phi}$) is the key factor of developing horizontal displacement rather than type of supporting systems or materials. That means small horizontal displacement occurs in sandy layer having large value of the internal friction angle, whereas vice versa in clayey layer having small value of the internal friction angle. Therefore, the result of EXCAV program is larger in sandy layer and vice versa in clayey layer. When comparing the measured result during construction to the value of 0.5%H, the measured result is 1.4 times greater than the value of 0.5%H. In contrast, the result of SUNEX program is only 78.1% of the value of 0.5%H and the one of EXCAV program is just 18.1% of that. This result shows the calculated value by SUNEX or EXCAV program is smaller than the observed value by measuring during construction. In result, more careful attention is needed to determine the behavior of the ground. To better analyze the behavior of the ground, more precise finite element method is required.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.12
• /
• pp.81-89
• /
• 2012

The existing tunnel in urban area can be enlarged because of requirement of road-widening by traffic growth. The protector with rectangular cross section can be set up in the tunnel, which will be constructed for enlargement of width, to solve traffic jam around the tunnel. It is impossible to install the rockbolt in the lower area of tunnel due to a limited space between the protector and cutting surface. The objective of this study is to suggest the method of shotcrete thickness increase instead of rockbolt installation in the side wall of tunnel for the stability of tunnel. Numerical analysis was performed to evaluate displacement at the crown of tunnel, convergence of tunnel, and stress in shotcrete lining in 3-lane and 4-lane NATM tunnels enlarged from 2-lane conventional tunnel. There were three types of analysis condition, rockbolt installation, no rockbolt installation, and increase of shotcrete thickness without rockbolt in the side wall of tunnel. There was no difference on the displacement at the crown and the convergence of upper tunnel. In the lower tunnel, the convergence in case of no rockbolt installation was larger as maximum 1.3mm than that in case of rockbolt installation. The stress in shotcrete lining in case of no rockbolt installation was larger as maximum 1.3MPa than that in case of rockbolt installation. Numerical analysis was performed to compare the behavior of shotcrete with rockbolt with that of shotcrete, which its thickness was increased, without rockbolt. The shotcrete has an increase of 20%(250mm ${\rightarrow}$ 300mm, 4-lane tunnel)~25%(200mm ${\rightarrow}$ 250mm, 3-lane tunnel) in its thickness to reduce the stress in shotcrete lining. The behavior of shotcrete lining increased the shotcrete thickness by 20%~25% was similar to that of existing shotcrete lining with rockbolt.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.350-355
• /
• 2005

The probes of fiber optic OTDR (Optical Time Domain Reflectometry) sensor was developed to measure displacements of social infrastructures. This probe was simply constructed with two conventional optical fiber connectors, and a fiber bending part, which transforms displacement to optical loss. When the displacement was affected on the bending loss part, the reflected light intensity of one optical connector was changed. The displacement was determined from this reflected light intensity change of the connector. fiber optic OTDR displacement sensor was developed as the multiplexed type of one fiber line with 5 sensor probes. Multiplexing operation was tested by these 5 sensor probes.