• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.515-525
• /
• 2007

In this investigation, results of laboratory tests on four reinforced concrete flat plate interior connections with elongated rectangular column support which has been used widely in tall residential buildings are presented. The purpose of this study is to evaluate an effect of column aspect ratio (${\beta}_c={c_1}/{c_2}$=side length ratio of column section in the direction of lateral loading $(c_1)$ to the direction of perpendicular to $c_1$) on the hysteretic behavior under earthquake type loading. The aspect ratio of column section was taken as $0.5{\sim}3\;(c_1/c_2=1/2,\;1/1,\;2/1,\;3/1)$ and the column perimeter was held constant at 1200mm in order to achieve nominal vertical shear strength $(V_c)$ uniformly. Other design parameters such as flexural reinforcement ratio $(\rho)$ of the slab and concrete strength$(f_{ck})$ was kept constant as ${\rho}=1.0%$ and $f_{ck}=40MPa$, respectively. Gravity shear load $(V_g)$ was applied by 30 percent of nominal vertical shear strength $(0.3V_o)$ of the specimen. Experimental observations on punching failure pattern, peak lateral-load and story drift ratio at punching failure, stiffness degradation and energy dissipation in the hysteresis loop, and steel and concrete strain distributions near the column support were examined and discussed in accordance with different column aspect ratio. Eccentric shear stress model of ACI 318-05 was evaluated with experimental results. A fraction of transferring moment by shear and flexure in the design code was analyzed based on the test results.

• Journal of The Korean Association For Science Education
• /
• v.38 no.4
• /
• pp.481-494
• /
• 2018

This study investigated elementary students' understanding of Earth revolution and its accompanied apparent motion of constellation in terms of spatial reasoning. We designed a set of multi-tiered constructed response items in which students described their own idea about the reason of consecutive movement of constellations for three months and drew a diagram about relative locations of the Sun, the Earth, and the constellations. Sixty-five sixth grade students from four elementary schools participated in the tests both before and after science classes on the relative movement of Earth and Moon. Their answers to the items were categorized inductively in terms of transforming frames of reference which are observed on the Earth and designed from the Space-based perspective. We analyzed those categories by the levels of spatial reasoning and depicted the change of students' levels between pre/post-tests so that we could get an idea on the preliminary developmental pathway of students' understanding of this topic. The lower anchor description was that constellations move around the Earth with geocentric perspective. Intermediate level descriptions were planar understanding of Earth movement, intuitive idea on constellation movement along with the Earth. Students with intermediate levels did not reach understanding of the apparent motion of constellations. As the upper anchor description students understood the apparent motion of constellations according to the Earth revolution and could transform their frames of reference between Earth-based view and Space-based view. The features as the case of evolutionary learning progressions and critical points of students' development for this topic were discussed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.391-399
• /
• 2004

The purpose of this study was to compare curing efficiency of newly developed curing units to traditional halogen curing unit by measuring thermal change and surface microhardness according to curing light system. Materials and mathods : The types of curing units were traditional low intensity halogen light(Optilux 360), plasma arc light(Flipo), low heat plasma arc light(Aurys), low intensity LED(Starlight), and high intensity LED(Freelight2). Temperature at the tip of light guide was measured by a digital thermometer using K-type thermocouple. And after resin was filled to 2, 3, 4mm teflon mold, bottom temperature measured during curing. After 24 hours, microhardness of top surface and bottom surface of each resin specimen were measured. Results : The result of this study can be summarized as follows, 1. As measuring temperature of curing unit tips, Flipo is the highest as $52.4^{\circ}C,\;Freelight2(37.86^{\circ}C),\;Optilux360(32.68^{\circ}C),\;Aurys(32.34^{\circ}C),\;and\;Starlight(26.14^{\circ}C)$ were followed. 2. Flipo and Freelight2 were the highest similarly and Optilux360 and Aurys were similarly next and Starlight was lowest in temperature of bottom surface of resin mold. 3. Microhardness of top surface were generally similar, and Aurys was relatively low. 4. Optilux 360 and Freelight2 were the highest, and Flipo, Starlight, and Aurys were followed in microhardness of bottom surface. Conclusions : The results suggest that careful use of Flipo and Freelight2 might be able to cure greater depth of resin composite and do not cause thermal problems than other curing units.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.132-138
• /
• 2009

Studies on target motion in 4-dimensional radiotherapy are being world-widely conducted to enhance treatment record and protection of normal organs. Prediction of tumor motion might be very useful and/or essential for especially free-breathing system during radiation delivery such as respiratory gating system and tumor tracking system. Neural network is powerful to express a time series with nonlinearity because its prediction algorithm is not governed by statistic formula but finds a rule of data expression. This study intended to assess applicability of neural network method to predict tumor motion in 4-dimensional radiotherapy. Scaled Conjugate Gradient algorithm was employed as a learning algorithm. Considering reparation data for 10 patients, prediction by the neural network algorithms was compared with the measurement by the real-time position management (RPM) system. The results showed that the neural network algorithm has the excellent accuracy of maximum absolute error smaller than 3 mm, except for the cases in which the maximum amplitude of respiration is over the range of respiration used in the learning process of neural network. It indicates the insufficient learning of the neural network for extrapolation. The problem could be solved by acquiring a full range of respiration before learning procedure. Further works are programmed to verify a feasibility of practical application for 4-dimensional treatment system, including prediction performance according to various system latency and irregular patterns of respiration.

• The Korean Society of Law and Medicine
• /
• v.20 no.1
• /
• pp.163-201
• /
• 2019

Doctor has the duty of an inter-hospital transfer, known as inter-facility or secondary transfer, when the diagnostic and therapeutic facilities required for a patient are not available at the given hospital. Also, the decision to transfer the patient to an another facility is rely on whether ill patient is the benefits of care, including clinical and non-clinical reasons, available at the another facility against the potential risks. Crucial point to note is that issues about 'inter-hospital transfer' is limited to questions occurred in the course of transfer between emergency medicals (facilities). 'emergency medical (facility)' is specified by Medical Law, article 3 and the duty of an inter-hospital transfer includes any possible adverse events, medical or technical, during the transfer. Because each medical facility has an different ability to care for a patient in an emergency condition, coordination between the referring and receiving hospitals' emergency medicals would be important to ensure prompt transfer to the definitive destination avoiding delay at an emergency. Simultaneously, transfer of documents about the transfer process, medical record and investigation reports are important materials for maintaining continuity of medical care. Although the duty of an inter-hospital transfer is recognized as one of duty of doctor and more often than not it occurs, there is constant legal conflict between a doctor and a patient related to the duty of the inter-hospital transfer. Therefore, we need clear and specific legal standard about the inter-hospital transfer. This paper attempts to review the Supreme Court's cases associated to the inter-hospital transfer and to compare opinion of the cases with guideline for an inter-hospital transfer already given. Furthermore, this article is intended to broaden our horizons of understanding the duty of an inter-hospital transfer and I wish this article helps to resolve the settlement and case dealt with the duty of inter-hospital transfer.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.551-557
• /
• 2013

In the present study, pristine carbon nanotube (p-CNT) and thiolated carbon naotube (t-CNT) electrodes were investigated to improve their detectabilities for cadmium (Cd) and lead (Pb). In addition, we evaluate which reaction mechanism is used when the electrolyte contains both Cd and Pb metals. Square wave stripping was employed for analyzing the sensitivity for the metals. A frequency of 30 Hz, a deposition potential of -1.2 V vs. Ag/AgCl and a deposition time of 300 s were used as optimal SWSV parameters. t-CNT electrodes show the better sensitivity for both Cd and Pb metals than that of p-CNT electrodes. In case of Cd, sensitivities of p-CNT and t-CNT electrodes were $3.1{\mu}A/{\mu}M$ and $4.6{\mu}A/{\mu}M$, respectively, while the sensitivities for Pb were $6.5{\mu}A/{\mu}M$ (p-CNT) and $9.9{\mu}A/{\mu}M$ (t-CNT), respectively. The better sensitivity of p-CNT electrodes is due to the enhancement in the reaction rate of metal ions that are facilitated by thiol groups attached on the surface of CNT. When sensitivity was measured for the detection of Cd and Pb metals present simultaneously in the electrolyte, Pb indicates better sensitivity than Cd irrespective of electrode types. It is ascribed to the low standard electrode potential of Pb, which then promotes the possibility of oxidation reaction of the Pb metal ions. In turn, the Pb metal ions are deposited on the electrode surface faster than that of Cd metal ions and cover the electrode surface during deposition step, and thus Pb metals that cover the large portion of the surface are more easily stripped than that of Cd metals during stripping step.

• Management & Information Systems Review
• /
• v.31 no.2
• /
• pp.41-59
• /
• 2012

ERP is a new technique of process innovation. It indicates enterprise resource planning whose purpose is an integrated total management of enterprise resources. ERP can be also seen as one of the latest management systems that organically connects by using computers all business processes including marketing, production and delivery and control those processes on a real-time basis. Currently, however, it's not easy for local enterprises to have operators who will be in charge of ERP programs, even if they want to introduce the resource management system. This suggests that it's urgently needed to train such operators through ERP education at school. But in the field of education, actually, the lack of professional ERP instructors and less effective learning programs for industrial applications of ERP are obstacles to bringing up ERP workers who are competent as much as required by enterprises. In ERP, accounting is more important than any others. Accountants are assuming more and more roles in ERP. Thus, there's a rapidly increasing demand for experts in ERP accounting. This study examined previous researches and literature concerning ERP education, identified problems with current ERP education at college and proposed how to solve the problems. This study proposed the ways of improving ERP education at college as follows. First, a prerequisite learning of ERP, that is, educating the principle of accounting should be intensified to make students get a basic theoretical knowledge of ERP enough. Second, lots of different scenarios designed to try ERP programs in business should be created. In association, students should be educated to get a better understanding of incidents or events taken place in those scenarios and apply it to trying ERP for themselves. Third, as mentioned earlier, ERP is a system that integrates all enterprise resources such as marketing, procurement, personnel management, remuneration and production under the framework of accounting. It should be noted that under ERP, business activities are organically connected with accounting modules. More importantly, those modules should be recognized not individually, but as parts comprising a whole flow of accounting. This study has a limitation because it is a literature research that heavily relied on previous studies, publications and reports. This suggests the need to compare the efficiency of ERP education between before and after applying what this study proposed to improve that education. Also, it's needed to determine students' and professors' perceived effectiveness of current ERP education and compare and analyze the difference in that perception between the two groups.

• Korean Journal of Poultry Science
• /
• v.37 no.2
• /
• pp.139-143
• /
• 2010

Quail is a very useful animal model for studying vertebrate development because of its small body size and unique reproductive traits. This species is also ideal model for producing germline chimeras via transferring exogenous primordial germ cells (PGCs) into the recipient embryo. To increase the contribution efficiency of donor PGCs into recipients' tissues, decreasing the population of endogenous PGCs has been rate-limiting factor. We therefore conducted this study to investigate if gamma ($\gamma$)-irradiation depletes endogenous PGCs in developing quail embryo. Firstly, freshly laid stage X quail embryos were irradiated with various output of $\gamma$-irradiation and its teratogenic effect on the embryo was evaluated. Although a dose-dependent increase in the number of embryo showing malformation was found as the output increased (0, 250, 500, 750, and 1,000 rads), only a maximum of 10.1% of embryos were abnormal in 1,000 rads. Immunocytochemical analysis using the QCR1 antibody, which is specific marker for quail PGCs, was conducted to analyze the effect of sterilization. As results, $\gamma$-rays at a dose-rate of 500 rads/73 sec onto undeveloped stage X embryo significantly reduced the number of germ cells to an average of 75.55 % and 82.03 % in male and female embryos, respectively. We conclude that $\gamma$-ray selectively targets PGCs while affects minimally to the somatic development in quail embryo. Our results will not only provide important data for germline chimera production but can be used for analyzing the effect of ionized rays on the differentiating germ cells in various stages during animal development.

• Journal of the Korean Society of Radiology
• /
• v.11 no.2
• /
• pp.145-155
• /
• 2017

The purpose of this study was to compare and analyze changes in body composition and bone mineral density (BMD) during combined exercise in premenopausal women who did not take regular diet or regular physical activity within 6 months, In addition to being able to recognize the importance of pre-menopausal women's health and exercise, it also provides basic data for the development of educational programs for early prevention of osteoporosis prevention education I want to. The average age of the subjects in their 30s was 35.44 years and their height was 158.89 cm in their 30s. The average age of the subjects in their 40s was 41.89 and their average height was 160.78 cm in their 40s. Body composition, BMI, and body fat percentage were higher in the 30s, and bone mineral content, lean body mass, skeletal muscle mass, body weight, body fat mass and waist circumference were higher in their forties. Lumbar spine BMD and femur density were higher in their 30s than their 40s. Body composition, skeletal muscle mass, and fat mass increased in the 30s body composition by age - related complex exercise in premenopausal women, body fat mass, body fat percentage, waist circumference decreased. Body mass, body fat, body fat percentage, and BMI decreased in the 40s. The lumbar spine, the lumbar spine, the lumbar spine, and the femur were increased in the lumbar spine, the lumbar spine, the femur, and the femur. In the post-analysis results, changes in body composition were statistically significant due to decrease in muscle mass, body weight, body fat mass and BMI after combined exercise. In the change of bone density, lumbar spine BMD was measured as lumbar spine 1, lumbar spine 2, lumbar spine 3, And the femur density was increase.

• Korean journal of food and cookery science
• /
• v.25 no.3
• /
• pp.365-378
• /
• 2009

This study performed microbiological hazards analysis in raw food materials, cooking processes, kitchen staff, utensils, and the environment in order to obtain contamination levels of S. aureus in school foodservice operations. S. aureus was not detected in cooked foods offered by the foodservice operations; however, it was found in raw food materials prior to cooking. In the case of vegetables, S. aureus was detected in washed mung bean sprouts, parboiled mung bean sprouts, and bellflower roots both before and after disinfection, at levels of 2.2, 1.0, 1.0, and 1.0 log CFU/g, respectively. For processed foods, S. aureus was detected in one sample of packaged bean curd as well as in mung bean jelly cake at the level of 1.5 log CFU/g. For meat products, S. aureus was detected in beef brisket and chicken at levels of 2.3 and 1.3 log CFU/g, respectively. To determine microbiological hazard data for the hands and gloves of cooking personnel, the staff members were divided into two groups: a group presenting Enterobacteriaceae or coliforms, and another group presenting neither Enterobacteriaceae nor coliforms. The results showed that S. aureus was detected on the hands of staff in each group at levels of 2.0 and 2.1 log CFU/hand, respectively, and at 1.8 and 0.0 log CFU/hand on the gloves of staff in each group, respectively. Among kitchen utensils, as an environmental factor in school foodservice operations, S. aureus was detected on meat knives, mixing bowls, and dish cloths at levels exceeding 1.0 log CFU/hand.