• Environmental Analysis Health and Toxicology
• /
• v.19 no.3
• /
• pp.295-305
• /
• 2004

본 연구에서는 유전자 재조합 발광 박테리아를 이용하여 농약에 대한 박테리아의 스트레스 반응과 세포 독성을 분석하였다. 15종류의 농약에 대하여 유전자 손상, 생물막 손상, 산화적 손상 및 단백질 손상을 측정할 수 있는 발광 박테리아와 독성 유무로 인한 세포 독성을 측정할 수 있는 발광 박테리아, 5종을 이용하여 스트레스 반응을 분류하고 세포 독성 정토를 분석하였다. 그 결과, 농약의 화학적 구조가 박테리아의 스트레스 반응에 영향을 미치며, 산화과정이 진행 됨에 따라 독성의 작용 기작이 변하는 것을 확인 할 수 있었다. 이와 같은, 유전자 재조합 발광 박테리아를 이용한 생물체내의 독성 메커니즘에 대한 분석은 생태계 유해물질들에 의한 독성을 분석하고 예상하기 위해 적용될 수 있을 것이다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.2
• /
• pp.156-163
• /
• 2008

Luminescent bacterial toxicity test was first introduced in the early 1980s, registered as international standard method in 1998 and now widely used as a common toxicity test method. This toxicity test uses luminescent bacterium, Vibrio fischeri, originated from marine environment as a test organism. The degree of toxicity can be evaluated from the comparison of luminescent emission intensity between control and treatment groups to toxicants and materials from various environmental matrix for 30 min. This test can be carried out by using commercial products and its results are sensitive and precise. This research is on the feasibility of adopting luminescent bacterial test as a domestic standard test protocol. Using commercial products, a series of experiments were conducted to identify the precision and accuracy of injection volume and light emission, and to evaluate concentration-response relationship between chemical concentrations and light emissions. Also, the feasibility of the application to environmental media and quality assurance/quality control were checked. The results of serial toxicity tests revealed that the preliminary luminescent bacterial toxicity test was robust and suitable as a standard method.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.429-437
• /
• 2018

In this study, the mixed toxicity of heavy metals (Cu, Pb, Hg) and surfactants (SLS, ALS) was evaluated by using Vibrio fischeri and Daphnia magna. The sensitivity of ecotoxicity to heavy metals was sensitive to daphnia but the case of surfactants were more sensitive to Vibrio fischeri. Experimental results of Vibrio fischeri show that the toxicity value P(O) was lower than the predicted value P(E), and the antagonistic effect was observed when the heavy metal and the surfactant were mixed. It seems that SLS and ALS, which are anionic surfactants, have anionic form on the hydrophilic head, so that they have an antagonistic effect that they are bonded with heavy metal ion which is a cation type and the actual toxicity is lowered. In Daphnia magna, the results showed that antagonistic, additive and synergistic effects were in order as concentrations increased. As the concentration increases, Daphnia magna, which is highly sensitive to heavy metals, seems to have a synergistic effect with a rapid increase in mortality.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2000.12a
• /
• pp.92-92
• /
• 2000

• Economic and Environmental Geology
• /
• v.50 no.3
• /
• pp.251-256
• /
• 2017

This study presents measures to enhance the efficiency of Successive Alkalinity Producing Systems(SAPS), a natural biological purification method that prevents environmental pollution arising from the release of Acid Mine Drainage(AMD) from abandoned mines into rivers and groundwater. The treatment of AMD using SAPS is based on biological processing technology that mostly involves sulfate reducing bacteria(SRB). It has been proven effective in real-world applications, and has been employed in various projects on the purification of AMD. However, seasonal decrease in temperature leads to a deterioration in the efficiency of the process because sulfate-reducing activity is almost non-existent during cold winters and early spring even if SRB is able to survive. Against this backdrop, this study presents measures to enhance the activity of the SRB of the organic layer by integrating light emitting diode(LED)s in SAPS and to maintain the active temperature using LEDs in cold winters. Given that mine drainage facilities are located in areas where power cannot be easily supplied, solar cell modules are proposed as the main power source for LEDs. By conducting further research based on the present study, it will be possible to enhance the efficiency of AMD treatment under extreme cold weather using solar energy and LEDs, which will serve as an environmentally-friendly solution in line with the era of green growth.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.828-834
• /
• 2012

The ecotoxicity detection device for preliminary test (Test jig) was manufactured to develop the biological early warning system using Vibrio fischeri. In this study, the ecotoxicity detection charateristics of the Test jig was investigated for 6 heavy metals (Cr, Zn, Pb, Cd, Cu and Hg). It was observed that relative luminescence unit (RLU) of Vibrio fischeri constantly decreased by the concentrations of the tested heavy metals. In contrast with other heavy metals, RLUs of Pb and Hg constantly decreased even at low concentrations. RLU of Hg drastically decreased when its concentration increased from 0.13 mg/L to 0.25 mg/L. $EC_{50}$ values of Cr, Zn, Pb and Cd gradually decreased with exposure time, whereas there was no significant change in $EC_{50}$ values of Cu and Hg with time. On the other hand, $EC_{50}$ values between the Test jig and Reference device were compared to evaluate the ecotoxicity detection performance of the Test jig. No big difference was found in $EC_{50}$ vlaues between the two devices, indicating that the Test jig could be applied as the ecotoxicity detection device for heavy metals.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.5
• /
• pp.451-458
• /
• 2009

Purpose: Optical molecular luminescence imaging is widely used for detection and imaging of bio-photons emitted by luminescent luciferase activation. The measured photons in this method provide the degree of molecular alteration or cell numbers with the advantage of high signal-to-noise ratio. To extract useful information from the measured results, the analysis based on a proper quantification method is necessary. In this research, we propose a quantification method presenting linear response of measured light signal to measurement time. Materials and Methods: We detected the luminescence signal by using lab-made optical imaging equipment of animal light imaging system (ALIS) and different two kinds of light sources. One is three bacterial light-emitting sources containing different number of bacteria. The other is three different non-bacterial light sources emitting very weak light. By using the concept of the candela and the flux, we could derive simplified linear quantification formula. After experimentally measuring light intensity, the data was processed with the proposed quantification function. Results: We could obtain linear response of photon counts to measurement time by applying the pre-determined quantification function. The ratio of the re-calculated photon counts and measurement time present a constant value although different light source was applied. Conclusion: The quantification function for linear response could be applicable to the standard quantification process. The proposed method could be used for the exact quantitative analysis in various light imaging equipments with presenting linear response behavior of constant light emitting sources to measurement time.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.212-215
• /
• 2000

Recombinant bioluminescent bacterial strains that use specific promoters fused to the bioluminescence genes (lux genes) have been applied in environmental monitoring. Advantages of using recombinant bioluminescent bacteria as blosensing cells include rapid responses, low costs, and improved reproducibility. In this study, a recombinant Escherichia coli, GC2, containing a lac::luxCDABE fusion immobilized with solid agar media and glass beads was used to estimate the effect of this soil flushing technique. This bacterium constitutively emits light under normal conditions (no toxic chemicals). When growth and metabolism of these bioluminescent bacteria is inhibited by their exposure to toxic chemicals, the bioluminescence (BL) is reduced. A biosurfactant, rhamnolipids, was used to extract phenanthrene from the soil after flushing.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.04a
• /
• pp.176-177
• /
• 1999

• Korean Journal of Microbiology
• /
• v.36 no.1
• /
• pp.1-7
• /
• 2000

The genes involved in riboflavin synthesis (ribI, II, III, and IV) were found immediately downstream of luxG in the lux operon from Photobacterium species. The single stranded DNA containing the intergenic region of lux genes and rib genes from Photobacterium phosphoreum was fully protected by P. phosphoreum mRNA from the S1 nuclease mapping assay suggesting that a transcriptional terminator was not present in the region. In addition, the levels of riboflavin synthase activity in P. phosphoreum was increased during the development of bacterial bioluminescence in the same fashion as the luciferase and fatty acid reductase activities. Insertion of the Photobacterium leiognathi DNA extending from luxB to ribII, between a strong lux promoter and a reporter gene (chloramphenicol acetyltransferase, CAT) and transferred by conjugation into P. leiognathi, did not affect expression of reporter gene. Moreover the CAT gene was not expressed in an analogous construct missing the lux promoter indicating that a promoter was not present in this region. Based on the data here, it can be concluded that the lux genes and rib genes in Photobacterium species are under common regulation.