• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.117-117
• /
• 2010

석탄 가스화에서 유도된 합성가스는 합성반응 공정을 통하여 합성석유, 메탄올(& DME), 합성천연가스(SNG) 등의 다양한 화학원료를 제조할 수 있어 이의 활용이 점차적으로 확대될 것이다. 이 중 SNG 공정의 경우, 석탄가스화기에서 생산된 합성가스는 집진, 탈황, 수성가스전환($H_2$/CO 비를 조절), $CO_2$ 제거 등의 공정을 거쳐 메탄화 반응기로 유도되는데, 메탄화 반응에서 $CO_2$가 반응에 참여하면 탄소포집 및 저장(CCS)의 부담을 크게 줄일 수 있어 이에 대한 관심이 커지고 있다. 특히, 상업용으로 활용되고 있는 단열반응기를 직렬로 연결할 경우, 메탄화반응의 발열로 인한 반응기내의 온도 상승으로 $CO_2$가 생성되는데 이후의 2차 또는 3차의 단열반응기에서 $CO_2$ 수소화반응이 진행되면 최종 생성물인 메탄의 수율이 증가하며, 뿐만아니라 생성물 중 포함된 수소의 농도를 낮출 수 있는 장점을 가지게 된다. 따라서, 본 연구에서는 Ni계 촉매를 사용하여 풍부한 $H_2$ 분위기에서 Fe를 첨가하여 이의 함량이 $CO_2$ 수소화반응의 탄소 전환율과 생성되는 메탄의 수율에 미치는 영향을 고찰하였다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.526-529
• /
• 2007

본 연구에서는 일정선량(600kGy)에서 전자빔 에너지(0.7, 1, 2 MeV)를 달리하여 조사한 $Ni/g-Al_2O_3$ 촉매를 이용하여 세 가지 다른 종류의 합성가스 전환반응(메탄의 이산화탄소 개질반응, 메탄의 수증기 개질반응, 메탄의 부분산화반응)을 수행하였다. 전자빔 조사는 He 분위기, 실온에서 수행하였으며, 조사된 촉매의 표면상태 변화를 살펴보기 위하여 XRD, XPS 분석을 수행하였다. 고에너지 전자빔 처리된 $Ni/g-Al_2O_3$ 촉매의 표면 특성분석 결과 촉매 표면의 Ni종은 metallic Ni, NiO, $NiAl_2O_4$의 3가지 상태로 존재함을 알 수 있었으며, 전자빔 에너지 증가에 따라 촉매 표면의 전체적인 Ni 함량과 촉매 표면의 Ni 분산도를 나타내는 Ni/Al ratio가 증가하였다. 또한, 전자빔 에너지 증가에 따라 Ni에 결합된 산소가 더 크게 감소되어 표면에서 산소 vacancy가 증가하는 결과를 가져왔으며, 이는 결국 세 가지 Ni의 상태 중 metallic Ni과 $NiAl_2O_4$를 증가시켰다. 이러한 결과들은 메탄의 이산화탄소 개질 반응과 메탄의 수증기 개질반응에서 반응물($CH_4$, $CO_2$)의 전환율과 생성물(CO, $H_2$)의 수득율을 증가시켰으며 메탄의 부분산화반응은 반응의 특성상 메탄의 전환율은 증가하나 생성물인 CO, $H_2$는 오히려 감소하는 결과를 가져옴을 알 수 있었다.

• Microbiology and Biotechnology Letters
• /
• v.18 no.5
• /
• pp.466-470
• /
• 1990

Aflatoxin $B_1$ ($AFB_1$) was reacted with ascorbic acid (AA) alone, with AA plue cysteine and with AA plus cupric ion for 5 days (at $37^{\circ}C$ and pH 5), and the mutagenicity of the reaction products was tested with Salmonella typhimurium TA 100. About 10% of AFBl induced mutagenesis was reduced when $AFB_1$ reacted with AA. This decreasing effect was more severe when $AFB_1$ reacted with AA plus cysteine. The mutagenicity of $AFB_1$ when reacted with AA plus cupric ion was almost completely inhibited, however, eupric ion itself was shown to enhance the mutagenicity of $AFB_1$. Therefore, $AFB_1$ may be degraded in the presence of AA under the given reaction condition and the reaction products was observed to have nonmutagenic effects on the bacterial mutagenecity trials.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.203-208
• /
• 1998

The photochemical reactivities of 2-halobenzyl phenyl ether, in which 2-halobenzyl moiety are tethered to phenyl moiety by the etheral alkyl linkage, has been studied. In the presence of nitrogen, the photochemical reaction of 2-chlorobenzyl phenyl ether (1) produces mainly phenol and photo-Fries type reaction products, while the corresponding bromo analog 2 produces photocyclization and photoreduced products, along with phenol and photo-Fries type products. The former result implies that since chlorine is bound to the benzyl ring firmly, the rather weaker $CH_{2}-O$ bond of 1 is cleavaged to produce the photo-Fries type product. The latter implies that the photoinduced fission of phenyl-bromine bond of 2 can compete with the fission of $CH_{2}-O$ bond, since the bond energy of phenyl-bromine is lower than that of phenyl-chlorine. Since by the presence of oxygen the formation of phenol is not affected much, the formation of photo-Fries type products is changed a little, and the formations of photocyclization and photoreduced products are affected effectively, a singlet state is involved in the formation of phenol, and both singlet and triplet state may be involved in the formation of photo-Fries type reaction, while a triplet state is involved in the formation of photocyclization and photoreduction products.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.535-539
• /
• 2008

Conversion to oil, yield of styrene and formation of side products such as ${\alpha}-methyl$ styrene, ethyl benzene, benzene, toluene, dimer and trimer were affected by residue formed during thermal degradation. Also, control of reaction temperature had a difficulty at the first stage. Thus, new reaction system using wetted-wall type reactor was proposed and examined on various parameters such as reaction temperature, feeding rate and removal velocity of formed vapor. Optimun condition was obtained from continuous thermal degradation using wetted-wall type reactor and reaction kinetic study was carried out at new type reactor.

• Journal of the Korean Chemical Society
• /
• v.54 no.1
• /
• pp.27-37
• /
• 2010

The reaction of 1,1'-bis(dimethylhydrosilyl)ferrocene with alkynes in the presence of a catalytic amount of ($C_2H_4$)Pt$(PPh_3)_2$ leads to the acyclic mixture of monohydrosilylated and/or dihydrosilylated compounds. But the analogous reactions in the presence of Ni$(PEt_3)_4$ catalyst yield monohydrosilylated compounds or dihydrosilylated products. The monohydrosilylated products were generated from the reactions of alkenes with the silylated ferrocene using nickel catalyst.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.72.2-72.2
• /
• 2010

평판형 고체산화물 연료전지 스택의 고온 밀봉 구조에 대하여 설명하고 스택 운전 후 사후 분석을 통하여 밀봉재와 금속 분리판의 계면반응에 대하여 고찰하였다. 대표적인 고온 밀봉재인 Barium-Silicate 계 결정화 유리와 Fe-Cr 계 금속 분리판은 스택의 작동온도인 $700{\sim}850^{\circ}C$ 에서 고온 반응을 통하여 계면에 반응생성물을 형성하는 것이 확인되었다. 이러한 계면반응은 장기 운전시 SOFC 스택 성능 저하의 원인이 되고, 열 싸이클(작동온도${\leftrightarrow}$상온)을 가하면 계면반응 생성물이 delamination 되어 밀봉구조가 파괴되어 수명을 단축시키게 된다. 계면반응은 Fe-Cr 계 금속 분리판의 산화물인 Cr 산화물, Fe 산화물이 밀봉유리 소재와 반응을 일으키는 것이 주요 원인으로 판명되었다. SOFC 스택에서 열 싸이클시 계면반응에 의하여 기밀도가 감소하는 현상이 확인되었으며, 밀봉 구조의 어느 부분에서 계면반응이 진행되는지 관찰하였다. 이러한 계면반응을 막기 위해서는 금속 분리판과 밀봉유리 사이에 계면반응을 억제하는 보호층을 형성하는 방법이 효과적이다. 본 연구에서는 보호층으로서 밀봉유리 및 Fe-Cr 계 금속 분리판과의 계면반응성이 낮고 열팽창 계수가 비슷한 Yttria Stabilized Zirconia 층을 APS(Atmospheric Plasma Spray) 공정을 이용하여 형성하였다. 밀봉유리/YSZ 보호층/금속분리판은 gas-tight 한 밀봉 구조를 형성하였으며, YSZ 보호층은 밀봉유리와 Fe-Cr 계 금속 분리판 소재와 계면반응을 효과적으로 억제하는 것이 확인되었다.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.69-83
• /
• 2020

Light olefins are important petrochemicals as well as primary building blocks for various chemical intermediates. As the number of ethane cracking center (ECC) process, in which ethylene accounts for most of the production, has increased in recent years, propylene supply is not catching up with steadily increasing propylene demand. This trend makes the conversion of methanol to olefins to get more industrial importance. The methanol to olefins (MTO) process produces methanol through syngas and obtain olefins such as propylene through methanol. Since the reaction from methanol to olefins provides different product compositions depending on the catalyst used for the reaction, it is important to choose an appropriate separation process for the reaction product with different composition. Four different separation processes are considered for four representative cases of product compositions. The separation processes for the reaction products are evaluated by techno-economic analysis based on the simulation results using Aspen plus. Guidelines are provided for selecting a suitable separation process for each of representative case of product compositions in the MTO process.

• Journal of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.408-414
• /
• 1974

The direct reactions of titanium tetrachloride with piperidine and diphenylamine in dichloromethane have been studied by examining the isolated reaction products. In the reaction with piperidine, titanium tetrachloride undergoes both addition and substitution reactions as in the following: $TiCl_4+C_5H_{10}NH{\to}TiCl_4{\cdot}C_5H_{10}NH$$TiCl_4+C_5H_{10}{\to}TiCl_3{\cdot}NC_5H_{10}+HCl$ The addition reaction is relatively fast and completed in minutes whereas the substitution reaction is very slow. The both reaction products coprecipitated with piperidine hydrochloride formed during the substitution reaction were isolated and characterized. The reaction with diphenylamine resembles to the above reaction but the addition compound could be obtained in pure crystal form.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.1
• /
• pp.52-64
• /
• 1997

Pelitic rocks of southwestern Nova Scotia have been affected by widespread contact metamorphism due to the intrusion of the Shellburne Pluton, with aureole up to 15 km wide. Well-preserved pseudomorphic textures indicate that common staurolite and andalusite metacrysts formed at the expense only of plagioclase, muscovite and biotite. Excess components (K, Na and Ca) from such replacement reactions imply extensive metasomatism throughout the contact aureole. Modal analysis of a typical andalusite-bearing rock indicates a one-to-one volume ratio of product to reactant. However the products of the replacement reactions contain approximately three times more aluminum than the reactants, indicating that the regional metasomatism also involved aluminum.