• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.699-707
• /
• 1995

The material that is both conductive in electricity and transparent to the visible ray is called transparent conducting thin film. It has many fields of application such as Solar Cell, Liquid Crystal display, Vidicon on T.V, transparent electrical heater, selective optical filter, and a optical electric device , etc. In the recent papers on several TCO( transparent conducting oxide ) material, the study is mainly focusing on ITO(indium tin oxide) because ITO shows good results on both optical and electrical properties. Nowaday, in the development of LCD(Liquid Crystal display), the low temperature process to reduce the production cost and to deposit ITO on polymer substrate (or low melting substrate) has been demanded. In this study, we prepared indium tin oxide(ITO) by a cylindrical DC magnetron sputtering with Indium-tin (9:1) alloy target instead of indium-tin oxide target. The resistivity of the film deposited in oxygen partial pressure of 5% and substrate temperature of 140.deg. C. is 1.6*10$\^$-4/.ohm..cm with 85% optical transmission in viaible ray.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.6
• /
• pp.287-291
• /
• 2008

Reactively magnetron sputtered TiN films were deposited on Si wafers under varying bias voltage and characterized by X-ray diffraction, field-emission scanning electron microscopy and Nanoindentation. The films deposited under an Ar + $N_2$ atmosphere exhibited a mixed (200)-(111) orientation with a strong (200) texture, which subsequently changed to a strong (111) texture with increasing bias voltage. The changes in texture and grain size of the TiN thin films are due to one or a combination of factors such as strain energy, surface free energy, surface diffusivity and adatom mobility. The influence of each factor depends on the processing conditions. The average deposition rate and grain size were calculated from FE-SEM images of the films indicating that the deposition rate was lower at the films deposited under bias voltage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.75-78
• /
• 1996

The deposition condition Gf TiN films as electrode was studied by sheet resistance, TiN depositon Thickness X-ray diffraction. TiN was made by reactively DC magnetron sputtering with varying $N_2$/Ar mixture gas and substrate temperature. After finding The deposition condition of TiN films, The samples with the structure of Cu/Ta$_2$O$_{5}$, TiN/Ta$_2$O$_{5}$Si, Cu/TiN/Ta$_2$O$_{5}$ Si were prepared and were measured I-V, C-V. As a results, it was found that when TiN was deposited in an $N_2$a results, it was found that when TiN was deposited in an $N_2$atmosphere its Sheet resistance is lower n than n V$_2$Ar mixtureixture

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.2
• /
• pp.83-89
• /
• 2011

In this study, we investigated the effects of shutter control by Reactive Magnetron Sputtering using Inductively-Coupled Plasma(ICP) for obtaining ZnO thin films with high purity. The surface morphologies and structure of deposited ZnO thin films were characterized using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and X-ray Diffractometer (XRD). Also, optical and chemical properties of ZnO thin films were analyzed by Spectroscopic Ellipsometer (SE) and X-ray Photoelectron spectroscopy (XPS). As a result, it observed that ZnO thin films grown at reactive sputtering using shutter control and ICP were higher density, lower surface roughness, better crystallinity than other conventional sputtering deposition methods. For obtaining better quality deposition ZnO thin films, we will investigate the effects of substrate temperature and RF power on shutter control by a reactive magnetron sputtering using inductively-coupled plasma.

• Journal of the Korean Ceramic Society
• /
• v.48 no.5
• /
• pp.342-347
• /
• 2011

Nanocrystalline TiN films were deposited on Si(100) substrate using asymmetric pulsed DC reactive magnetron sputtering. We investigated the growing behavior and the structural properties of TiN films with change of duty cycle and pulsed frequency. Grain size of TiN films were decreased from 87.2 nm to 9.8 nm with decrease of duty cycle. The $2{\theta}$ values for (111) and (200) crystallographic planes of the TiN films were also decreased with decrease of duty cycle. This shift in $2{\theta}$ could be attributed to compressive stress in the TiN coatings. Thus, the change of plasma parameter has a strong influence not only on the microstructure but also on the residual stresses of TiN films.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.45-46
• /
• 2008

Hard coatings of TiN which exhibit a large variation in their electrical resistivities, have been prepared in magnetron sputtering system using bipolar pulsed DC generator. TiN coatings have also been prepared using a DC generator in the same sputtering system under identical deposition conditions. Microstructural, Mechanical, Crystallographic properties of TiN films using continuous and bipolar pulsed DC generators were examined. Field emission scanning microscope and Nanoindenter have been used to characterize the coatings.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.300.1-300.1
• /
• 2013

반사방지막 코팅(Anti-reflection coating)은 태양전지(Solar cell), 발광다이오드(LED) 등의 반사율을 낮추어 효율을 증대시키기 위하여 사용되고 있다. 본 실험에서는 유리 기판 위에 실리콘 타겟을 이용한 Reactive magnetron sputtering 장비를 활용하여, 50~100 mTorr의 높은 공정 압력(High pressure)에서 증착하여 SiO2 반사방지막 코팅층을 형성하였다. Ellipsometer를 이용하여 SiO2 박막층의 굴절률(Refractive index)을 측정한 결과, 공정 압력에 따라 SiO2 박막이 다양한 굴절률을 가지는 것을 확인할 수 있었다. 또한, UV-Vis spectrometer를 이용하여, 450~600 nm 파장에서의 반사율(Reflectance)과 투과율(Transmittance)을 측정하여 비교, 분석하였다. 나아가 증착된 SiO2 반사방지막을 비정질 실리콘 박막 태양전지에 적용하여 효율 향상 효과를 실험하였다. 이를 활용하여 낮은 굴절률을 갖는 반사방지용 SiO2 코팅층을 형성하여 태양전지의 광 변환 효율을 상승 시킬 수 있고, 발광다이오드의 광 추출 효율을 증가시킬 있을 것으로 여겨진다.

• Korean Journal of Metals and Materials
• /
• v.47 no.6
• /
• pp.378-382
• /
• 2009

We investigated the effects of deposition conditions on the fabrication of $Fe_{3}O_{4}$ thin films using a reactive DC magnetron sputtering at room temperature. The structural, electrical, and magnetic properties of Fe oxide films dependence on the film thickness, oxygen flow rate, and the substrate crystallinity were also studied. We have successfully fabricated $Fe_{3}O_{4}$ film with thickness of about 10 nm under optimal reactive sputtering conditions. The saturation magnetization, resistivity, and Verwey transition of the $Fe_{3}O_{4}$ film were298 emu/cc, $4.0{\times}10^{-2}{\Omega}cm$, and 125 K, respectively.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.30-34
• /
• 2011

We investigated the structural, electrical and optical characteristics of thin films with ITO deposited by a low temperature RF reactive magnetron sputtering. The deposited thin films were annealed for 2 hours at various temperatures of $50^{\circ}C$, $100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$ and $250^{\circ}C$ and were analyzed by using X-ray diffractometer, scanning electron microscopy and 4 point probe. The films annealed at temperatures higher than $150^{\circ}C$ were found to be crystallized and their electrical resistance were decreased from $40{\Omega}cm$to $18{\Omega}cm$. The optical transmittance of the film annealed at $150^{\circ}C$ was increased by over 87% in the 450 nm ~ 900 nm wavelength range. Our results indicate that the films with ITO deposited at even a low temperature can show better optical and electrical properties through a proper heat treatment.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.23.1-23.1
• /
• 2011

최근 화석연료를 대체하기 위한 지속가능한 신에너지에 대한 요구가 증대됨에 따라 태양광 발전에 대한 연구도 폭발적으로 늘어가고 있는 추세이다. 태양광이 화석연료 대체에너지로 실효성을 가지기 위해서는 태양광 발전 시스템의 발전효율을 높이고 생산 비용을 저감하는 문제가 선결되어야 한다. 기존 실리콘 태양전지 시스템 설비 비용의 60% 이상을 차지하는 모듈의 제조과정에서 소재 손실을 최소화함으로써 저가격화를 실현하고자 박막형 태양전기 기술이 태동되었다. 현재 박막 태양전지와 관련하여 활발한 기술 개발이 진행되고 있으며 상당한 시장 점유율을 보이고 있는 실정이다. 박막 태양전지 분야에서 CIGS와 같은 화합물 반도체 박막 태양전지 시장이 확대되고 있는 실정을 고려한다면 실리콘 박막 태양전지의 경우 고효율화 저가격화 달성은 더욱 절실한 문제이다. 실리콘 박막의 경우 독성이 없으며 고갈 우려가 없는 소재이면서 기존의 직접회로 산업의 인프라 구조를 활용할 수 있어 많은 기대와 관심을 끌고 있는 박막 태양전지 후보이다. 박막 태양전지 제조에 있어서 핵심기술은 도핑된 실리콘층과 광흡수를 위한 진성 실리콘층을 합성하는 공정 기술이다. 현재 박막 태양전지 산업에서 실리콘 박막 소재의 합성은 주로 PECVD법에 의해 이루어지고 있다. 그러나 스퍼터 공정을 이용한 실리콘 박막 합성 연구 또한 20년 이상의 오랜 기간 동안 연구되어 오고 있다. 스퍼터 공정을 이용한 실리콘 박막합성는 독성 가스를 사용하지 않으며, 디스플레이와 같은 기존의 소자 공정 기술을 채용할 수 있다는 장점을 가지고 있어 주목 받고 있다. 실제로 반응성 마그네트론 스퍼터링에 의해 제조된 실리콘 박막은 PECVD공정에 의한 실리콘 박막에 상응하는 우수한 광전자적 특성을 보인다. 스퍼터 공정에서는 박막 성장을 위한 수송 물질들이 열적 평형 상태에 근접한 라디칼들이라기 보다 대부분 고에너지 원자종과 이온들이 주류를 이루고 있어 합성된 실리콘 박막의 결함 제어가 어렵다는 문제가 있다. 박막 합성 기구의 규명을 통하여 이러한 문제를 해결하기 위한 시도들이 이루어 지고 있으며, 본 발표를 통하여 스퍼터 공정을 이용한 태양전지용 실리콘 박막 합성기술에 대한 현황을 소개하고자 한다.