• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.2
• /
• pp.2949-2967
• /
• 1973

The purpose of this study is to find out and determine the minimum consumptive use of water for Korean cabbage and turmp, so that the minimum water requirement can be secured always for a stable cultivation of these vegetables regardless of weather conditions. The experiment was conducted in two periods; first one from May to July and second one from August to October, each experiment with two varieties of cabbage and two varieties of radish with 2 replicants and 15 treatments. The results found from the above are briefly as follows: 1. Since the mean soil moisture equivalent 64 days after the treatment was 28.5% and the soil moisture content at the time was 2.67% which is far less than that of the wilting point, the crop seemed to be extremely caused by a drought. 2. The rate of 51 days after the seeding, soil moisture content of plot No.2 where irrigation has been continuous was the highest or 21.3%, whereas the plot No.14 without irrigations was 11.2% and the lowest. Therefore, the soil moisture content for the minimum qrowth seemed to be 20%. 3. The consumptive coefficient of Blaney and Criddle on cabbage in two periods were K=1.14 and 0.97 respectively, and on radish in two periods were K=1.06 and 0.86 respectively, thus, cabbage was higher than radish. The consumptive coefficient in the first experiment (May-July) was 0.17 to 0.20 higher than the 2nd experiment(August-October). 4. Nomally, cabbage and radish germinate within one week, however, the germination ot these crops which were treated with a suspended water supply from the beginning took two full weeks. 5. When it elapsed 30 days after seeding, the conditions in plot 1,2 and 3 were fairly good however, the crops in the plops other than these showed a withering and the leaves were withered and changed into high green due to an extrem drought. Though it was about same at the beginning, the drought damage on cabbage was worse than that on radish period, and the reasos for this appears in the latter that the roots are grown too deep. 6. The cabbage showed a high affinity between treated plots and varieties. Consequently, it can be said that cabbage is very suseptive to drought damage, and the yield showed a difference of 35% to 56% depending on the selection oe varieties. 7. The radish also showed a high affinity between the treated plots, however, almost us affinity existed between varieties. Therfore, the yield of radish largely depends on the extent of drought, and the selection of variety does not affect at all. 8. The normal consumptive use on cabbage is $0.62{\ell}/sec$, while that on radish is $0.64{\ell}/sec$, and the minimum optimum water requirement that was obtained in this study is $4,000cc/day/m^3$ or $0.462{\ell}/sec/ha$.

• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.267-274
• /
• 2017

This paper deals with the natural occurrence of total aflatoxins ($B_1$, $B_2$, $G_1$, and $G_2$) in commercial herbs for food and medicine. To monitor aflatoxins in commercial herbs for food and medicine not included in the specifications of Food Code, a total of 62 samples of 6 different herbs (Bombycis Corpus, Glycyrrhizae Radix et Rhizoma, Menthae Herba, Nelumbinis Semen, Polygalae Radix, Zizyphi Semen) were collected from Yangnyeong market in Seoul, Korea. The samples were treated by the immunoaffinity column clean-up method and quantified by high performance liquid chromatography (HPLC) with on-line post column photochemical derivatization (PHRED) and fluorescence detection (FLD). The analytical method for aflatoxins was validated by accuracy, precision and detection limits. The method showed recovery values in the 86.9~114.0% range and the values of percent coefficient of variaton (CV%) in the 0.9~9.8% range. The limits of detection (LOD) and quantitation (LOQ) in herb were ranged from 0.020 to $0.363{\mu}g/kg$ and from 0.059 to $1.101{\mu}g/kg$, respectively. Of 62 samples analyzed, 6 semens (the original form of 2 Nelumbinis Semen and 2 Zizyphi Semen, the powder of 1 Nelumbinis Semen and 1 Zizyphi Semen) were aflatoxin positive. Aflatoxins $B_1$ or $B_2$ were detected in all positive samples, and the presence of aflatoxins $G_1$ and $G_2$ were not detected. The amount of total aflatoxins ($B_1$, $B_2$, $G_1$, and $G_2$) in the powder and original form of Nelumbinis Semen and Zizyphi Semen were observed around $ND{\sim}21.8{\mu}g/kg$, which is not regulated presently in Korea. The 56 samples presented levels below the limits of detection and quantitation.

• Korean Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.158-173
• /
• 2012

The objectives of this study were to analyze the longitudinal gradient and temporal variations of water quality in Daecheong Reservoir in relation to the major inflowing streams from the watershed, during 2001~2010. For the study, we selected 7 main-stream sites of the reservoir along the main axis of the reservoir, from the headwater to the dam and 8 tributary streams. In-reservoir nutrients of TN and TP showed longitudinal declines from the headwater to the dam, which results in a distinct zonation of the riverine ($R_z$, M1~M3), transition ($T_z$, M4~M6), and lacustrine zone ($L_z$, M7) in water quality, as shown in other foreign reservoirs. Chlorophyll-a (CHL) and BOD as an indicator of organic matter, were maximum in the $T_z$. Concentration of total phosphorus (TP) was the highest (8.52 $mg\;L^{-1}$) on March in the $R_z$, and was the highest (165 ${\mu}g\;L^{-1}$) in the $L_z$ on July. Values of TN was the maximum (377 ${\mu}g\;L^{-1}$) on August in the $R_z$, and was the highest (3.76 $mg\;L^{-1}$) in the $L_z$ on August. Ionic dilution was evident during September~October, after the monsoon rain. The mean ratios of TN : TP, as an indicator of limiting factor, were 88, which indicates that nitrogen is a surplus for phytoplankton growth in this system. Nutrient analysis of inflowing streams showed that major nutrient sources were headwater streams of T1~T2 and Ockcheon-Stream of T5, and the most influential inflowing stream to the reservoir was T5, which is located in the mid-reservoir, and is directly influenced by the waste-water treatment plants. The key parameters, influenced by the monsoon rain, were TP and suspended solids (SS). Empirical models of trophic variables indicated that variations of CHL in the $R_z$ ($R^2$=0.044, p=0.264) and $T_z$ ($R^2$=0.126, p=0.054) were not accounted by TN, but were significant (p=0.032) in the $L_z$. The variation of the log-transformed $I_r$-CHL was not accounted ($R^2$=0.258, p=0.110) by $I_w$-TN of inflowing streams, but was determined ($R^2$=0.567, p=0.005) by $I_w$-TP of inflowing streams. In other words, TP inputs from the inflowing streams were the major determinants on the in-reservoir phytoplankton growth. Regression analysis of TN : TP suggested that the ratio was determined by P, rather than N. Overall, our data suggest that TP and suspended solids, during the summer flood period, should be reduced from the eutrophication control and P-input from Ockcheon-Stream should be controlled for water quality improvement.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.158-174
• /
• 2002

The aim of this study was to investigate the effect of light irradiation modes on polymerization shrinkage, degree of cure and microleakage of a composite resin. VIP$^{TM}$ (Bisco Dental Products, Schaumburg, IL, USA) and Optilux 501$^{TM}$ (Demetron/Kerr, Danbury, CT, USA) were used for curing Filtek$^{TM}$ Z-250 (3M Dental Products, St. Paul., MN, USA) composite resin using following irradiation modes: VIP$^{TM}$ (Bisco) 200mW/$\textrm{cm}^2$ (V2), 400mW/$\textrm{cm}^2$ (V4), 600mW/$\textrm{cm}^2$ (V6), Pulse-delay (200 mW/$\textrm{cm}^2$ 3 seconds, 5 minutes wait, 600mW/$\textrm{cm}^2$ 30seconds, VPD) and Optilux 501$^{TM}$ (Demetron/Kerr) C-mode (OC), R-mode (OR). Linear polymerization shrinkage of the composite specimens were measured using Linometer (R&B, Daejeon, Korea) for 90 seconds for V2, V4, V6, OC, OR groups and for up to 363 seconds for VPD group (n=10, each). Degree of conversion was measured using FTIR spectrometer (IFS 120 HR, Bruker Karlsruhe, Germany) at the bottom surface of 2 mm thick composite specimens V2, Y4, V6, OC groups were measured separately at five irradiation times (5, 10, 20, 40, 60 seconds) and OR, VPD groups were measured in the above mentioned irradiation modes (n=5 each). Microhardness was measured using Digital microhardness tester (FM7, Future-Tech Co., Tokyo, Japan) at the top and bottom surfaces of 2mm thick composite specimens after exposure to the same irradiation modes as the test of degree of conversion(n=3, each). For the microleakage test, class V cavities were prepared on the distal surface of the ninety extracted human third molars. The cavities were restored with one of the following irradiation modes : V2/60 seconds, V4/40 seconds, V6/30 seconds, VPD , OC and OR. Microleakage was assessed by dye penetration along enamel and dentin margins of cavities. Mean polymerization shrinkage, mean degree of conversion and mean microhardness values for all groups at each time were analyzed using one-way ANOVA and Duncan's multiple range test, and using chi-square test far microleakage values. The results were as follows : . Polymerization shrinkage was increased with higher light intensity in groups using VIP$^{TM}$ (Bisco) : the highest with 600mW/$\textrm{cm}^2$, followed by Pulse-delay, 400mW/$\textrm{cm}^2$ and 200mW/$\textrm{cm}^2$ groups, The degree of polymerization shrinkage was higher with Continuous mode than with Ramp mode in groups using Optilux 501$^{TM}$ (Demetron/Kerr). . Degree of conversion and microhardness values were higher with higher light intensity. The final degree of conversion was in the range of 44.7 to 54.98% and the final microhardness value in the range of 34.10 to 56.30. . Microleakage was greater in dentin margin than in enamel margin. Higher light intensity showed more microleakage in dentin margin in groups using VIP$^{TM}$ (Bisco). The microleakage was the lowest with Continuous mode in enamel margin and with Ramp mode in dentin margin when Optilux 501$^{TM}$ (Demetron/Kerr) was used.

• Journal of Oral Medicine and Pain
• /
• v.33 no.4
• /
• pp.339-352
• /
• 2008

Aims: The aims of this study were to identify the association between cervical muscle pain and TMD by pressure pain response, and to find cervical muscles showing moderate to severe pressure pain that are correlated with masticatory muscle pain. Methods: Patients(n=129, female 65.9%, mean age 28.8 years) answered a TMD questionnaire asking about headache, neck pain, emotional stress, sleep disturbance, parafunction habits, and pain intensity. A clinical examination of the masticatory system was performed. Of the neck muscles, (1) the upper sternocleidomastoid, (2) the middle sternocleidomastoid, (3) the upper trapezius, (4) the splenius capitis, (5) the semispinalis capitis, (6) the scalene medius, and (7) the levator scapulae muscles were examined by palpation. Pressure pain or tenderness of all palpation sites was scored from 0 to 3 according to the pain response. The variables of sum of pressure pain scores were calculated from pressure pain scores and were used for statistical analyses. Results: Eighty patients(62.0%) answered that they suffer from neck pain in the TMD questionnaire. More than 40% of sternocleidomastoid and upper trapezius examination sites showed moderate to severe tenderness in the cervical muscles, and 36% of middle masseter in the masticatory muscles. For the 129 patients, the sum of cervical muscle pain scores(mean=12.88, SD=8.06) and the sum of TMD pain scores(mean=5.36, SD=5.10) were moderately correlated($\rho$ = 0.502, P < 0.001). The sum of TMD pain scores tends to increase as the sum of cervical muscle pain scores increases(Y = 0.395${\cdot}$X, $R^2$ = 0.659, P < 0.001). In the patients with masticatory muscle disorders, the sum of sternocleidomastoid and upper trapezius pain scores(mean = 8.67, SD = 4.95) and the sum of temporalis and masseter pain scores(mean = 3.37, SD = 3.56) showed moderate correlation($\rho$ = 0.375, P < 0.001). Those two variables were in a proportionate relationship(Y = 0.359${\cdot}$X, $R^2$ = 0.538, P < 0.001). In a partial correlation analysis of the sum of unilateral pain scores, the sum of right cervical muscle pain scores and the sum of left cervical muscle pain scores showed the highest correlation(r = 0.802, P < 0.001). The sum of right TMD pain scores and the sum of left TMD pain scores were moderately correlated(r = 0.481, P < 0.001). For the twenty patients with unilateral TMD pain, the partial correlation coefficient between the sum of ipsilateral cervical muscle pain scores and the sum of contralateral cervical muscle pain scores was the largest(r = 0.597, P = 0.009). A partial correlation between the sum of primary TMD side pain scores and the sum of ipsilateral cervical muscle pain scores was 0.564(P = 0.015). Conclusions: TMD is associated with cervical muscle pain on condition of pressure pain response to palpation. Of the cervical muscles, sternocleidomastoid and upper trapezius frequently exhibit moderate to severe pressure pain, and they are closely related to the masticatory muscle pain. The characteristic of symmetric involvement of pain is prominent in cervical muscles; however, TMD can affect the level of cervical muscle pain to modify its symmetric nature.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.4
• /
• pp.478-486
• /
• 2000

Background : In acute lung injury, alveolar macrophages play a pivotal role in the inflammatory process during the initiation phase and in the reconstruction and fibrosis process during the later phase. Recently, it has been proven that alveolar macrophages are constituted by morphologically, biochemically and immunologically heterogenous cell subpopulations. The possibility of alterations to these characteristics of the alveolar macrophage population during lung disease has been raised. To investigate such a possibility a hyperoxic rat lung model was made to check the distributional and morphological changes of rat alveolar macrophage subpopulation in acute hyperoxic lung injury. Method : Alveolar macrophage were lavaged from normal and hyperoxic lung injury rats and separated by discontinuous gradients of percoll. After cell counts of each density fraction were accessed, the morphomeric analysis of alveolar macrophages was performed on cytocentrifuged preparations by transmission electron micrograph. Result : 1. The total alveolar macrophage cell count significantly increased up to 24 hours after hyperoxic challenge (normal control group $171.6{\pm}24.1{\times}10^5$, 12 hour group $194.8{\pm}17.9{\times}10^5$, 24 hour group $207.6{\pm}27.1{\times}10^5$, p<0.05). oHoHH However the 48 hour group ($200.0{\pm}77.8{\times}10^5$) did not show a significant difference. 2. Alveolar septal thickness significantly increased up to 24 hours after hyperoxic challenge(normal control group $0.7{\pm}0.2{\mu}m$, 12 hour group $1.5{\pm}0.4{\mu}m$, 24 hour group $2.3{\pm}0.4{\mu}m$, p<0.05). However the 48 hour group did not show further change ($2.5{\pm}0.4{\mu}m$). Number of interstitial macrophage markedly increased at 24 hour group. 3. Hypodense fraction(fraction 1 and fraction 2) of alveolar macrophage showed a significant increase following hyperoxic challenge ($\beta=0.379$.$\beta=0.694$. p<0.05) ; however, fraction 3 was rather decreased following the hyperoxic challenge($\beta=0.815$. p<0.05), and fraction 4 showed an irregular pattern. 4. Electron microscopic observation of alveolar macrophage from each fraction revealed considerable morphologic heterogeneity. Cells of the most dense subfraction(fraction 4) were small, round, and typically highly ruffled with small membrane pseudopods. Cells of the least dense fraction (fraction 1) were large and showed irregular eccentric nucleus and high number of heterogenous inclusions. Conclusion : In conclusion, these results suggest that specific hypodense alveolar macrophage subpopulation may play a an important role in an acute hyperoxic lung injury model But further study, including biochemical and immunological function of these subpopulations, is needed.

• Tuberculosis and Respiratory Diseases
• /
• v.64 no.6
• /
• pp.433-438
• /
• 2008

Background: Measurement of the maximum oxygen uptake in patients with chronic obstructive pulmonary disease (COPD) has been used to determine the intensity of exercise and to estimate the patient's response to treatment during pulmonary rehabilitation. However, cardiopulmonary exercise testing is not widely available in Korea. The 6-minute walk test (6MWT) is a simple method of measuring the exercise capacity of a patient. It also provides high reliability data and it reflects the fluctuation in one' s exercise capacity relatively well with using the standardized protocol. The prime objective of the present study is to develop a regression equation for estimating the peak oxygen uptake ($VO_2$) for men with moderate to very severe COPD from the results of a 6MWT. Methods: A total of 33 male patients with moderate to very severe COPD agreed to participate in this study. Pulmonary function testing, cardiopulmonary exercise testing and a 6MWT were performed on their first visits. The index of work ($6M_{work}$, 6-minute walk distance [6MWD]${\times}$body weight) was calculated for each patient. Those variables that were closely related to the peak $VO_2$ were identified through correlation analysis. With including such variables, the equation to predict the peak $VO_2$ was generated by the multiple linear regression method. Results: The peak $VO_2$ averaged $1,015{\pm}392ml/min$, and the mean 6MWD was $516{\pm}195$ meters. The $6M_{work}$ (r=.597) was better correlated to the peak $VO_2$ than the 6MWD (r=.415). The other variables highly correlated with the peak $VO_2$ were the $FEV_1$ (r=.742), DLco (r=.734) and FVC (r=.679). The derived prediction equation was $VO_2$ (ml/min)=($274.306{\times}FEV_1$)+($36.242{\times}DLco$)+($0.007{\times}6M_{work}$)-84.867. Conclusion: Under the circumstances when measurement of the peak $VO_2$ is not possible, we consider the 6MWT to be a simple alternative to measuring the peak $VO_2$. Of course, it is necessary to perform a trial on much larger scale to validate our prediction equation.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.353-360
• /
• 2015

Yakju, a Korean traditional alcoholic beverage, is made from rice and Nuruk. In this study, the fermentation characteristics of Yakju was investigated using rice and rice starch. Ingredients was classified into raw material (rice, rice starch) and starter (enzyme supplements, modified Nuruk, traditional Nuruk, and yellow rice koji) for fermentation. The crude protein content of rice, rice starch, and starter were determined as follows (%): rice 6.69, rice starch 0.44, enzyme supplements 7.84, modified Nuruk 15.29, traditional Nuruk 14.28, and yellow rice koji 7.28. The alcohol content of rice with traditional Nuruk ($20.13{\pm}0.12%$) was higher than other Yakju. The concentration of organic acids of rice starch-based Yakju (389.83~538.34 mg%) was higher than that of rice Yakju (259.27~357.70 mg%). The concentration of nitrogen compound of rice Yakju (498.38~5976.93 ppm) was higher than that of rice starch-based Yakju (600.43~4463.79 ppm). In line with these findings, further studies will be necessary for the quality analysis of the rice, rice starch and fermented starter (enzyme supplements, modified Nuruk, traditional Nuruk and yellow rice koji).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.455-462
• /
• 2000

The objective of this study was to examine the physicochemical characteristics of coagulation reaction between loess and red tide organisms (RTO) and its feasibility, in developing a technology for the removal of RTO bloom in coastal sea. The physicochemical characteristics of loess were examined for a particle size distribution, surface characteristics by scanning electron microscope, zeta potential, and alkalinity and pH variations in sea water. Two kinds of RTO that were used in this study, Cylindrothen closterium and Skeietonema costatum, were sampled in Masan bay and were cultured in laboratory. Coagulation experiments were conducted using various concentrations of loess, RTO, and a jar tester. The supernatant and RTO culture solution were analyzed for pH, alkalinity, RTO cell number. A negative zeta potential of loess increased with increasing pH at $10^(-3)M$ NaCl solution and had -71.3 mV at pH 9.36. Loess had a positive zeta potential of +1,8 mV at pH 1.98, which resulted in a characteristic of material having an amphoteric surface charge. In NaCl and $CaCl_2$, solutions, loess had a decreasing negative zeta potential with increasing $Na^+\;and\;Ca^(+2)$ ion concentration and then didn't result in a charge reversal due to not occurring specific adsorption for $Na^+$ ion while resulted in a charge reversal due to occurring specific adsorption for $Ca^(+2)$ ion. In sea water, loess and RTO showed the similar zeta potential values of -112,1 and -9.2 mV, respectively and sea sand powder showed the highest zeta potential value of -25.7 mV in the clays. EDLs (electrical double-layers) of loess and RTO were extremely compressed due to high concentration of salts included in sea water, As a result, there didn't almost exist EDL repulsive force between loess and RTO approaching each other and then LVDW (London-yan der Waals) attractive force was always larger than EDL repulsive force to easily form a floe. Removal rates of RTO exponentially increased with increasing a loess concentration. The removal rates steeply increased until $800 mg/l$ of loess, and reached $100{\%}$ at 6,400 mg/l of loess. Removal rates of RTO exponentially increased with increasing a G-value. This indicated that mixing (i.e., collision among particles) was very important for a coagulation reaction. Loess showed the highest RTO removal rates in the clays.

• Radiation Oncology Journal
• /
• v.16 no.3
• /
• pp.265-274
• /
• 1998

Purpose : This prospective study has been conducted to assess the value of three dimensional conformal radiation therapy (3DCRT) for lung cancer and to determine its potential advantage over current treatment approaches. Specific aims of this study were to 1) find the most ideal 3DCRT technique 2) establish the maximum tolerance dose that can be delivered with 3DCRT and 3) identify patients at risk for development of radiation pneumonitis. Materials and Methods : Beginning in Nov. 1994, 95 patients with inoperable non-small cell lung cancer (stage I; 4, stage II; 1, stage IIIa; 14, stage IIIb; 76) were entered onto this 3D conformal trial Areas of known disease and elective nodal areas were initially treated to 45 Gy and then using 3DCRT technique 65 to 70 Gy of total dose were delivered to the gross disease. Sixty nine patients received 65 Gy of total dose and 26 received 70 Gy Seventy eight patients (82.1$\%$) also received concurrent MVP chemotherapy. 3DCRT plans were compared with 2D plans to assess the adequacy of dose delivery to target volume, dose volume histograms for normal tissue, and normal tissue complication Probabilities (NTCP). Results : Most of plans (78/95) were composed of non-coplanar multiple (4-8) fields. Coplanar segmented conformal therapy was used in 17 pateints, choosing the proper gantry angle which minimize normal lung exposure in each segment. 3DCRT gave the full dose to nearly 100$\%$ of the gross disease target volume in all patients. The mean NTCP for ipsilateral lung with 3DCRT (range; 0.17-0.43) was 68$\%$ of the mean NTCP with 2D treatment planning (range; 0.27-0.66). DVH analysis for heart showed that irradiated volume of heart could be significantly reduced by non-coplanar 3D approach especially in the case of left lower lobe lesion. Of 95 patients evaluable for response, 75 (79$\%$), showed major response including 25 (26$\%$) with complete responses and 50 (53$\%$) with partial responses. One and two rear overall survivals of stage III patients were 62.6$\%$ and 35.2$\%$ respectively. Twenty percent (19/95) of patients had pneumonitis; Eight patients had grade 1 pneumonitis and 11 other patients had grade 2. Comparison of the average of NTCP for lung showed a significant difference between patients with and without radiation pneumonitis. Average NTCP for Patients without complication was 62$\%$ of those with complications. Conclusions : This study showed that non-coplanar multiple fields (4-8) may be one of the ideal plans for 3DCRT for lung cancer. It also suggested that 3DCRT may provide superior delivery of high dose radiation with reduced risk to normal tissue and that NTCP can be used as a guideline for the dose escalation.