• Korean journal of applied entomology
• /
• v.18 no.1 s.38
• /
• pp.11-14
• /
• 1979

Spinaches showing dark green mosaic symptoms were used for identification of broad bean wilt virus. In host reaction test, that virus caused local lesions on the inoculated leaves and mosaic symptoms on upper leaves of Chenopodium amaranticolor, Chenopodium quinoa and Vicia faba, and developed mosaic symptoms on Physalis floridana, Spinacia oleracea, Nicotiana tabacum, (White burley, Bright yellow) Nicotiana glutinusa. In agar gel-diffusion test, the virus showed positive reaction with broad bean wilt virus antiserum. Spherical virus particles with size of 25nm in diameter were observed in electron microscope.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.856-865
• /
• 1994

Cylindrical fine-ceramics, $Al_{2}O_{3}$, was lapped on its outer surface by vibrational lapping unit manufactured in the laboratory. Cylindrical lapping of fine-ceramics is necessarily be characterized and optimized because its process as other finishing methods is time-spending and, so, inefficient one, and because it is very complicated and random process affected by numerous factors in itself and in its environment. In this study, an efficient experimental approach, experimental design method, was used to analyze characteristics of the cylindrical lapping of fine-ceramics, $Al_{2}O_{3}$, and response surface methodology(RSM) to find out the optimal variables combination for the maximum improvement of surface roughness($R_a$). From the final surface roughness point of view in the given lapping conditions, a stationary point or optimal lapping conditions as well as the possible maximum improvement of surface roughness($R_a$) was predicted.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.3
• /
• pp.533-541
• /
• 2013

In this study, a simple principal component analysis using Lasso is proposed. This method consists of two steps. The first step is to compute principal components by the principal component analysis. The second step is to regress each principal component on the original data matrix by Lasso regression method. Each of new principal components is computed as the linear combination of original data matrix using the scaled estimated Lasso regression coefficient as the coefficients of the combination. This method leads to easily interpretable principal components with more 0 coefficients by the properties of Lasso regression models. This is because the estimator of the regression of each principal component on the original data matrix is the corresponding eigenvector. This method is applied to real and simulated data sets with the help of an R package for Lasso regression and its usefulness is demonstrated.

• Journal of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.463-467
• /
• 1975

The polymerization of methyl methacrylate(MMA) initiated by cobalt (II) nitrate in tetrahydrofuran (THF) has been studied. From the results of kinetic studies, the overall polymerization rate (Rp) could be expressed as following; $R_p=k\;[cobalt(Ⅱ)\;nitrate]^{0.5}\;[MMA]^{1.5}$ By considering the effects of chelating agent on the polymerization rate, it could be assumed that the monomer, MMA might form a coordination complex with cobalt(II) nitrate. In the presence of radical inhibitor hydroquinone, the inhibition time was observed. And the apparent overall activation energy was calculated to be 14.0 kcal/mole.

• Korean Journal of Food Science and Technology
• /
• v.18 no.4
• /
• pp.259-263
• /
• 1986

The effect of ingredients on the hardness of ginseng jelly were studied by response surface methodology and observed by multiple regression equation $({R_A}^2=0.8660)$ and response surface contour. The hardness of ginseng jelly was directly influenced by the order of the contents of glucose > gelatin > sucrose > water > citric acid and it was also affected interactions of water and glucose.

• Science of Emotion and Sensibility
• /
• v.3 no.2
• /
• pp.103-112
• /
• 2000

본 연구는 Graphic simulator에서 자동차 속도 변화에 따른 운전자의 감성변화를 주관적 평가와 자율신경계의 반응을 통해 알아보고자 한다. 속도 변화는 정차(0km/h), 40km/h, 100km/h, 160km/h로 제시하였고, 건강한 10명의 피험자를 대상으로 심박변화율, 피부저항, 피부온도, 맥파 등의 생리신호를 측정하였다. 본 연구 목적에 적절한 속도 관련 어휘를 추출하여 각 속도에서의 주관적 감성 변화를 평가하였다. 또한, 각 속도 실험 전 후에 Simulator Sickness를 측정하여 Simulator Sickness가 실험 결과에 미치는 영향을 분석하였다. 속도가 증가함에 따라 긴장도와 쾌도가 증가한다는 주관적 평가 결과를 얻었다. 실험 전에 비해 실험 후의 Simulator Sickness 값은 증가하였지만 실험 전, 후의 통계적 차이는 관찰할 수 없었다. 속도 증가에 따라, 평균 R-R간격, 피부온도의 진폭은 감소하였고, 피부저항은 증가하였고, 맥파의 평균 진폭은 감소하였다. 그러므로 본 연구를 통해 Simulator Sickness의 큰 영향 없이 Graphic Simulator에서 속도의 증가에 따라 교감신경계가 활성화됨을 관찰할 수 있었고, 이는 실제 동적 환경에서 속도 변화에 따른 자율신경계의 반응 및 주관적 평가 결과와 일치하는 것이다. 향후 복합 감각 자극이 가능한 시뮬레이터가 구축이 될 것이고, 이를 통해 보다 현실감 있는 동적 환경 제시와 감성 측정이 가능할 것이다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.102-105
• /
• 2007

The performance evaluation of the micro thruster utilizing hydrogen peroxide decomposition is described. The catalyst bed was made of porous ceramic material($Isolite^{(R)}$) with large surface to mass ratio. 14%wt platinum was loaded on the catalyst support as a catalyst. Hydrogen peroxide with 85% concentration was used as a monopropellant. The length of the catalyst bed and the feed pressure of the hydrogen peroxide were taken as the parameters for the experiment. All experiments were carried out under cold start condition for 30 seconds. The $c^*$ efficiency was evaluated for each test case using measured pressure data. For the catalyst support length of 30 mm and feed pressure at 5.51 bar, satisfactory $c^*$ efficiency beyond 95% was observed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.21-27
• /
• 2018

In this paper the laminate design parameters are researched to maximize the performance index of a composite pressure vessel. To maximize the performance index, the three design variables that the thickness of each of helical and hoop layers and the length of hoop layer are considered under the assumption of fixed internal space. To optimize the variables, the response surface method is introduced for construction of the surrogate model and the ANOVA(analysis of variance) is performed to evaluate the effects of the variables. The optimization problem is formulated to maximize performance index under the burst pressure constraint. To verify the effectiveness of the research, numerical analyses are performed for the optimum model.

• Journal of Industrial Technology
• /
• v.14
• /
• pp.127-140
• /
• 1994

This study is concerned with the accuracy and the patterns when different methods was used in interpolation task. Although 3 methods employed the same modality for input (visual) and for output (manual responding), they differed in central processing, which method 1 is relatively more tendency of verbal processing, method 2 is realtively more tendency of spatial processing and method 3 needed a number of switching code (verbal/spatial) performing task. Split-plot design was adopted, which whole plot consisted of methods (3), orientations (horizon, vertical), base-line sizes (300, 500, 700 pixels) and split plot consisted of target locations (1-99). The results showed the anchor effect and the range effect. Method 2, method 3 and method 1 that order was better accuracy. ANOVA showed that the accuracy was significantly influenced by the method, the location of target, and its interactions ($method{\times}location$, $size{\times}location$). Analysis of error data, response time and frequency of under, just, over estimate indicated that a systematic error pattern was made in task and methods changed not only the performance but also the pattern. The results provided support for the importance of the multiple resources theory in accounting for S-C-R compatibility and task performance. They are discussed in terms of multiple resources theory and guidelines for system design is suggested by the S-C-R compatibility.

• Journal of Hydrogen and New Energy
• /
• v.25 no.1
• /
• pp.79-86
• /
• 2014

In Dimethyl Ether (DME) indirect production processes, DME have a reforming process to separate Methanol. DME has a high cetane number and Methanol has a high octane number. Each fuel has a different combustion characteristics and reactivity. So, this paper was investigated on the combustion characterisitics of DME and Methanol. Basically, Methanol has a effect of retarding ignition. However, Within 10% of total carbon mole number in DME, Methanol slightly changed the onset timing of Low Temperature Reaction (LTR) with increasing thermal-ignition preparation range. It means that controlling combustion phasing of DME can be possible without eliminated LTR. In case of IMEP, the ranges.