• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.130-145
• /
• 2019

The palaces in South Korea are largely divided into primary palaces (法宮) and secondary palaces (離宮). In the early Joseon period, the primary palace was Gyeongbokgung Palace, and the secondary palace was Changdeokgung Palace. Additionally, there is the concept of imperial palaces (正宮). Gyeongbokgung Palace was the primary palace and the imperial palace. The topography of Gyeongbokgung is based on Mt. Baegak, which is the symbol of royal authority. The location of the palaces was chosen to highlight the king's dignity and authority. The three gates and three courts (三門三朝) were positioned on a straight line based on one axis along the ridge of Mt. Baegak to establish the legitimacy, hierarchy, and unity of the kingship. The secondary palace was built according to the demands of the king and the royal family or the political situation. It was created as a royal living space; thus, creating independent and diverse spaces along multiple axes. The primary palace was chosen to be built on the terrain of Yang, and the secondary palace was chosen to be built on the terrain of Yin; the criteria for laying buildings in the palace areas had to be different. The most important point in the formation of Joseon palaces was that the secret vital energy for the king (王氣) originated from the sacred mountain. Important elements of the palace were the secret vital energy chain of feng shui (風水氣脈) and the forbidden stream (禁川). The secret vital energy chain of feng shui was the gateway to the secret vital energy for the king, and the forbidden stream was a method of preventing the king from leaving the palace grounds. Gyeongbokgung Palace, which is on typical feng shui terrain, faithfully reflects the principles of feng shui. On the other hand, the secondary palace was built on incomplete and irregular feng shui terrain. Feng shui was part of the nature and the geography of the ruling classes in the Joseon Dynasty. By examining their geography, I believe that the perfection of traditional culture inheritance and restoration can be improved.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.73-104
• /
• 2007

Centering around ruins recognized of being relatively early stage related to flat tile and brick, excavated in Silla capital area, the study attempted elementary approach to seek the appearance time of every remain through comparing them from the excavated cases and production methods of Short beating, Medium beating plate, Long beating plate and Stamped-roof tile. Gyeongju began to use the short beating plate made of tile-less plates or tile plate and increased its quantity. That is deemed to be due to efficiency of beating plate making methods, and moreover to be limited only for use in the palace castle and offices. That is, making short beating plates is presumed to be made merely under some definite objectives. Medium beating plate has been spread to the whole country since Silla and Baekje united. Differently from Koguryo and Baekje, Silla had its unique Beating-plates making technology available for mass-production, which was spread to the whole country and resulted in disappearing of Koguryo and Baekje technology. Long beating plate was not nearly founded in Gyeongju area, but flat tile and common tile excavated in Sachunwang Temple site and Samrang Temple 3rd remains are known. In the outskirts of Gyeongju, long beating plate appeared between the latter half of 8C and the beginning of 9C. Until now, different views have raised to appearance of long beating plate of Unified Silla, which is expected to be clarified under the situation excavated by position relations. Stamped-roof title in Gyeongju is estimated as used after the datum point year 679. While in Baekje area, five stems and branches were involved, in Silla area, code or sign was shown much. The difference between two areas would be due to each other factory, and especially the marked contents werenot letters, which means it had been changed from Baekje s existing-methods. That is, it says the production environment changed owing to Silla's merging. And stamped-roof tile was temporarily used in Gyeongju but soon disappeared, which was because Silla beating plates made under cylinder-shaped tile barrel(圓筒瓦桶) and hitting-pressing of Medium beating plate had beenspread to the whole country, so the production technology of Koguryo and Baekje was naturally dismissed. In consequence, the mergence by Silla brought about unification of each nation's special technology.

• The Korean Journal of Archival Studies
• /
• no.51
• /
• pp.133-173
• /
• 2017

The records and archives center provide a variety of archival information services in an effort to get closer to the public. However, there are still some problems with regard to the lack of awareness of records and archives. In order to activate the use of archives, it is necessary to understand the users of archives. Given the problems, this study aims to investigate the awareness of records and archives in university students who are potential users of archives as well as to suggest methods to activate the use of records and archives reflecting the characteristics of university students' awareness. As such, this study surveyed 182 university students at J university. The questionnaire items referred to Market & Opinion Research International (MORI) (2003) as a part of the projects conducted by the Museums Libraries Archives Council (MLA) and Cho's study (2008). The questionnaire items consisted of four major areas: awareness of records and archives, experience with records and archives or reasons of not using them, requirements for the use of archives by potential users, and efficient method of promoting archives. As a result of the survey, most of the university students are indifferent to records. However, they recognized that it is highly important to manage records that are related to historical values and archives that are relevant to information values. In addition, they showed a positive intention to use the archives in the future; thus, it is highly likely for them to be converted into active users through appropriate services. Based on the results, this study proposed important considerations for activating the use of the archives to university students, and suggested methods to activate the archives in terms of user education, program development, and user segmentation.

• The Journal of Korean society of community based occupational therapy
• /
• v.10 no.3
• /
• pp.1-13
• /
• 2020

Objective : The purpose of this study is to present an analysis model in developing an inclusive response for safety hazards and disaster preventive information system for vulnerable people to the disaster including persons with disabilities, and those with specific needs. Methods : In this study, the persona analysis method is used to analyze fictitious characters that correspond to various characteristics such as age, disability, environment, occupation, etc. in terms of the scenario of some particular disaster subjects. Based on the user's communication problems derived from the persona analysis, focused group interview and ICF based analysis were implemented to identify needs and arbitration methods. Results : The needs from persona analysis and ICF-based communication items analysis identifies the factors that make each fictitious character difficult in terms of communication in obtaining the benefits consistent with the purpose of the service. The study derives service requirements that can provide arbitration or facilitation methods to increase communication ability of the users. Conclusion : Through the persona analysis method, difficulties that could occur when receiving disaster information using communication devices were identified and analyzed in conjunction with communication problems described in the ICF. In building information services for the prevention of safety hazards and disasters, this study presented a model that uses the persona analysis method and the ICF classification system to derive user requirements for accessible information system.

• Science of Emotion and Sensibility
• /
• v.24 no.1
• /
• pp.105-114
• /
• 2021

This study determines the differences between Korean female university students and their Chinese counterparts residing in Korea by evaluating the subjective sensation and tactile preference in fabrics for casual shirts. Seven types of white causal shirt fabrics were selected as specimens from those available in spring and autumn shirt collection. The fabrics were made from various fibers (cotton 100%, polyester 100%, flax 100%, polyester 80%/cotton 20%, polyester 65%/cotton 35%, polyester 50%/cotton 45%/spandex 5%, and polyester 50%/modal 50%). Forty Korean and Chinese female university students subjectively assessed the subjective sensation of fabrics used for casual shirts. Participants were asked to observe the seven types of fabrics and complete the questionnaire. The subjective sensation to be assessed for white casual shirt fabrics was classified into the following four factors: smoothness, lightness, softness, and stretchiness. Subjective sensation factors showed partially significant differences by nationality. Korean female students evaluated cotton fabric as being light, whereas their Chinese counterparts evaluated the polyester/cotton/spandex blended fabric as light. Korean female students evaluated polyester/modal blended fabric as being stretchable. The tactile preference for fiber composition of the fabrics showed partially significant differences by nationality. Korean female students preferred cotton 80%/polyester 20% blended fabric, polyester 50%/cotton 45%/spandex 5% blended fabric, and flax 100% fabric. The subjective sensation of the fabrics had different effects on preferences by nationality. Smoothness and softness had positive effects on preferences for the fabrics of Korean students. However, smoothness, softness, and stretchiness had positive effects on the preferences of Chinese students. The subjective sensation and tactile preference for casual shirt fabrics showed a difference between Korean female students and their Chinese counterparts. Therefore, when planning casual shirt fabrics for female university students, it is necessary to reflect on these differences in subjective sensation and tactile preference.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.419-430
• /
• 2021

Remote sensing techniques using drone-based multispectral image were studied for fast and two-dimensional monitoring of algal blooms in the river. Drone is anticipated to be useful for algal bloom monitoring because of easy access to the field, high spatial resolution, and lowering atmospheric light scattering. In addition, application of multispectral sensors could make image processing and analysis procedures simple, fast, and standardized. Spectral indices derived from the active spectrum of photosynthetic pigments in terrestrial plants and phytoplankton were tested for estimating chlorophyll-a concentrations (Chl-a conc.) from drone-based multispectral image. Spectral indices containing the red-edge band showed high relationships with Chl-a conc. and especially, 3-band model (3BM) and normalized difference chlorophyll index (NDCI) were performed well (R²=0.86, RMSE=7.5). NDCI uses just two spectral bands, red and red-edge, and provides normalized values, so that data processing becomes simple and rapid. The 3BM which was tuned for accurate prediction of Chl-a conc. in productive water bodies adopts originally two spectral bands in the red-edge range, 720 and 760 nm, but here, the near-infrared band replaced the longer red-edge band because the multispectral sensor in this study had only one shorter red-edge band. This index is expected to predict more accurately Chl-a conc. using the sensor specialized with the red-edge range.

• Korean Journal of Comparative Education
• /
• v.27 no.4
• /
• pp.255-283
• /
• 2017

The purpose of this study is to analyze the comtent of the education system of US and the UK in order to build an integrated system that can develop the leadership competency of preschool principle. Based on this, the implications are as follows. First, competencies can developed through learning rather than fixed. Therefore, re-conceptualization of leadership competence appropriate to the characteristics and organization of the individual as the presiding authority of the preschool can be considered as ability to show visible knowledge and skills, invisible self concept. Therefore, it is necessary to establish a capacity development plan based on this. Second, the introduction and implementation of continuous and systematic training programs such as the training system that strengthens the capacity of the directors and principals of the United States and the United Kingdom is necessary. To do this, we must introduce a system that renews certification every five years, like the United States, rather than a system that acquires and maintains certification with a single training. Third, various training methods should be carried out. In the case of the US and the UK, we think it is desirable to train in various ways in the training period, the university, the teacher center, and the private organization or association. Therefore, it is necessary to build a cooperation system with various institutions such as training institutes, universities, teacher centers, educational information research institutes, and private organizations in each province, and strengthen them in various ways. Fourth, the contents and methods of qualification training and future job training of the director of the preschool should be deviated from the uniform level. Therefore, the systematic research that reflects the knowledge and contents of the administration required in the field should be given priority by the university or research organization that is in charge of the training.

• 한국사회정책
• /
• v.20 no.3
• /
• pp.77-115
• /
• 2013

The purpose of this study is to present empirical evidence for discussion of financing social welfare via estimating optimal tax burden in the main member countries of the OECD by using Hausman-Taylor method considering endogeneity of explanatory variables. Also, the author produced an international tax comparison index reflecting theoretical hypotheses on revenue-expenditure nexus within a model to compare real tax burden by countries and to examine feasibility of tax increase in Korea. As a result of the analysis, the higher the level of tax burden was, the higher the level of welfare expenditure was, indicating the connection between high burden and high welfare from the aspect of scale. The results also indicated that the subject countries recently entered into the state of low tax burden. Meanwhile, Korea had maintained low burden until the late 1990s but the tax burden soared up since the financial crisis related to the IMF. However, due to the impact of foreign economy and the tax reduction policy, it reentered into the low-burden state after 2009. On the other hand, the degree of social welfare expenditure's reducing tax burden has been gradually enhanced since the crisis. In this context, the current optimal tax burden ratio of Korea as of 2010 may be 25.8%~26.5% of GDP based on input of welfare expenditure variables, a percent that Korea was investigated to be a 'high tax burden-low ITC' country whose tax increase of 0.7~1.4%p may be feasible and that the success of tax system reform for tax increase might be higher probability when compare to others. However, measures of increasing social security contributions and consumption tax were analyzed to be improper from the aspect of managing finance when compared to increase in other tax items, considering the relatively higher ITC. Tax increase is not necessarily required though there may be room for tax increase; the optimal tax burden ratio can be understood as the level that may be achieved on average when compared to other nations, not as the "proper" level. Thus, discussion of tax increase should be accompanied with comprehensive understanding of models of economic developmental difference from nations and institutional & historical attributes included in specific tax mix.

• (The)Study of the Eastern Classic
• /
• no.66
• /
• pp.129-162
• /
• 2017

This article examines the form of hell and the nature of literary works in the late Joseon period. 'Hoeshimgok(回心曲)' divides a sinner into a man and a woman, and presents a virtue of goodness to a man and an item of evil to a woman. The elements of virtue and malice are both Buddhist ethical norms and Confucian ethical norms. Hell-related novels have common features that emphasize the ethical norms that should be kept in daily life through the causes of hell, though the patterns of punishment and their reasons are slightly different depending on the works. And 'Hoeshimgok(回心曲)' and these works are generally shown by reducing the punishment pixel of hell compared to the cause of hell. This characteristic shows that the literary works of the late Joseon literature related to hell were mainly aimed at providing or educating ethical virtues centered on 'Samgangwol(三綱五倫)' through sanctions of 'Hell' widely known to the general public. The emphasis on Confucian ethics is not limited to works of literature related to hell. In the nineteenth century, when these works were created and circulated, there is a surge in the number of chapters and publications of books for Confucian Indoctrination, Didactic Gasa, and Goodness Books, which emphasize Confucian ethics. Such a strengthening of the Confucian ethical consciousness can be attributed to the crisis of the 19th century Joseon society about the social confusion that threatens the existing system. In particular, the creation and circulation of literary works related to hell in the late Joseon period is related to the dissemination and spread of Catholicism. In the end, the hell shape of the late Joseon literature reflects the crisis of social confusion faced by Joseon society in the nineteenth century. Therefore, it can be said that it has the character of literary response to the prevalent diffusion of Catholicism.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.727-736
• /
• 2021

Road tunnel lengths are increasing. Some 1,300 tunnels with 1,102 km in length had been increased till 2019 from 2010. There are 64 tunnels over 3,000 m in length, with their total length adding up to 276.7 km. Safety facilities in the event of a tunnel fire are critical so as to prevent large-scale casualties. Standards for installing disaster prevention facilities are being proposed based on the guidelines of the Ministry of Land, Infrastructure and Transport, but they may be limited to deep underground tunnels. This study was undertaken to provide guidelines for the spacing of evacuation connection passages and the widths of evacuation connection doors. Evacuation with various spacing and widths was simulated in regards to evacuation time, which is the measure of safety, using the evacuation analysis simulation software EXODUS Ver.6.3 and the fire/smoke analysis software SMARTFIRE Ver.4.1. Evacuation connection gates with widths of 0.9 m and 1.2 m, and spacings of 150 m to 250 m, were set to every 20 m. In addition, longitudinal slopes of 6 % and 0 % were considered. It was determined to be safe when the evacuation completion time was shorter than the delay diffusion time. According to the simulation results, all occupants could complete evacuation before smoke spread regardless of the width of the evacuation connection door when the longitudinal slope was 6 % and the interval of evacuation connection passage was 150 m. When the evacuation connection passage spacing was 200 m and the evacuation connection gate width was 1.2 m, all occupants could evacuate when the longitudinal slope was 0 %. Due to difference in evacuation speed according to the longitudinal slope, the evacuation time with a 6 % slope was 114 seconds shorter (with the 190 m connection passage) than with a 0 % slope. A shorter spacing of evacuation connection passages may reduce the evacuation time, but this is difficult to implement in practice because of economic and structural limitations. If the width of the evacuation junction is 1.2 m, occupants could evacuate faster than with a 0.9 m width. When the width of a connection door is 1.2 m with appropriate connection passage spacing, it might provide a means to increase economic efficiency and resolve structural limitations while securing evacuation safety.