• Geophysics and Geophysical Exploration
• /
• v.16 no.3
• /
• pp.171-179
• /
• 2013

An automated ultrasonic velocity measurement system adopting pulse-echo-overlap (PEO) method has been constructed, which is known to be a precise and versatile method. It has been applied to velocity measurements for 5 kinds of engineering plastic cores and compared to first arrival picking (FAP) method. Because it needs multiple reflected waves and waves travel at least 4 times longer than FAP, PEO has basic restriction on sample length measurable. Velocities measured by PEO showed slightly lower than that by FAP, which comes from damping and diffusive characteristics of the samples as the wave travels longer distance in PEO. PEO, however, can measure velocities automatically by cross-correlating the first echo to the second or third echo, so that it can exclude the operator-oriented errors. Once measurable, PEO shows essentially higher repeatability and reproducibility than FAP. PEO system can diminish random noises by stacking multiple measurements. If it changes the experimental conditions such as temperature, saturation and so forth, the automated PEO system in this study can be applied to monitoring the velocity changes with respect to the parameter changes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.468-473
• /
• 2004

본 연구에서는 기존의 ㅡ자형, ㄴ자형, ㄷ자형 조파시스템이 경사진 방향으로 가동될 때 발생되는 에너지의 불연속성으로 인한 회절철상이나 구조물에서 반사된 파가 조파판에서 발생하는 재 반사 철상의 단점을 보완할 수 있도록 곡선형태의 조파판을 배치하여 수치실험을 행하였다. 조파판을 곡선형으로 배치시켜 실험 대상물에서부터 반사된 파가 가능한 조파판에 직각으로 부딪치도록 유도하였다. 편미분 격자생성기법을 도입하여 구성된 곡선형 격자망에서 Copeland(1985)의 완경사 방정식을 이용하여 수치해석 하였다. 우선, 1차원 실험영역에서 파를 생성하여 대상구조물에서 반사되어 돌아온 반사파 성분을 조파판에서 흡수하면서 입사파를 생성하는 현상을 재현하였다. 그 후, 실험영역을 2차원으로 확장시켜 조파판을 곡선형으로 배치하여 수치 실험하여 진행파와 회절파의 중첩으로 고안된 해석해와 수치 해를 비교하려다. 그 결과, 기존의 조파시스템에 비하여 에너지 불연속선에서의 회절 현상도 발생하지 않고 반사파 성분을 효율적으로 흡수하는데 효과적임을 알아냈다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.538-542
• /
• 2005

본 연구에서는 Penney와 Price(1952)의 해석 해를 사용하여 반무한방파제, 양익방파제등에서 발생하는 회절현상에 대한 해석 해를 구하였다. 양익방파제가 경사지게 위치한 경우에도 중첩을 통하여 해석 해를 구할 수 있었으며, 이를 바탕으로 방파제의 위치와 입사파랑의 각도에 따른 각각의 경우에 대하여 해석 해를 구할 수 있다. 또한, 구조물에 입사된 파랑성분과 구조물의 폭만큼의 개구부를 갖는 양익방파제를 통과하는 회절파성분과 같게 표현될 수 있는 반사파성분을 서로 중첩시켜 구조물 전면부에서 발생되는 완전반사 및 부분반사현상에 대한 해석 해를 제시하였다. 국내의 실무에서 해안 및 항만 구조물 설계에 사용되는 수치프로그램들의 정확도를 간단히 판단할 수 있는 비교 대상으로 이러한 해석해가 이용될 수 있으리라 판단된다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.150-155
• /
• 2001

단일 소파막에 대한 파도 반사문제와 투과. 또 이중으로 설치된 소파막에 대한 반사와 투과문제에 대한 양함수 해를 도출하였다. 단일 막에 대한 파도의 반사가 에어리 파의 해당 벽에 의해서만 입자반사로서 일어난다고 보고 이를 원거리 파도에너지와 일치시켜 반사 파고를 얻었다. 이중 막에 대해서는 각각의 파도가 독립적으로 단일 막에 의해서 반사 또는 투과가 되고 이들이 중첩되어 전체 파고가 형성되어지는 것으로 간주하여 전체 반사계수와 투과계수를 결정하였다. 단일 막에 대한 투과계수의 결과는 정성적으로 다른 계산결과와 비슷한 경향을 보이며, 실험결과보다는 높게 예측되었다. 이중 단일 막에 대한 결과는 낮은 주파수에서 실험결과와 유사한 경향을 보이고, 중간 주파수에서 완만한 감소를 보였다. 계산이 양함수 해로 얻어지므로 개념설계와 현장에서 유용하게 활용될 수 있으리라 기대된다.

• Journal of Korea Water Resources Association
• /
• v.37 no.9
• /
• pp.729-736
• /
• 2004

Analysis of reflection of random waves propagating over rectangular submerged non-porous breakwaters was performed by using the eigenfunction expansion method. In this study, random waves were generated by superposition of several monochromatioc waves. Reflection coefficients were calculated by summing each numerical results of regular waves. Predicted results from the eigenfunction expansion method were in a good agreement with the results of laboratory measurements. Reflection coefficients of random waves were also resonated at the Bragg reflection condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1269-1274
• /
• 2014

Since power and control cables have narrow bandwidth due to their loss at high frequencies, it is difficult to detect the weak fault using conventional reflectometry. It is because the reflected wave caused by the weak fault is overlapped and hidden by the ripple of the strong reflected wave from the end of the cable. This paper proves that the reflected wave from the weak fault can be considered to be linearly superposed on the strong reflected wave from the end of the cable based on the transmission line theory. Then, the weak fault point is experimentally diagnosed using the difference between reflection coefficients before and after the fault generation.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2000.09a
• /
• pp.149-154
• /
• 2000

파랑은 먼바다에서 주로 바람에 의하여 생성되어 천해로 전파되어 오면서 천수, 굴절, 회절, 반사, 중첩의 여러 가지 변형 과정을 거친다. 이 변형 과정 가운데 바닥의 영향으로 발생하는 것은 천수, 굴절, 반사이고 파랑간에 발생하는 것은 회절, 중첩이다. 수심이 파장의 1/2보다 작은 경우 바닥의 영향을 받게 되는데 이 해역이 중간수심해와 천해에 해당한다. 파랑변형모형은 파향선추적법부터 시작된다. (중략)

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.335-344
• /
• 2011

A curvilinear non-hydrostatic free surface model is developed to investigate nonlinear wave interactions in a circular channel. The proposed model solves the unsteady Navier-Stokes equations in a three-dimensional domain with a pressure correction method, which is one of fractional step methods. A hybrid staggered-grid layout in the vertical direction is implemented, which renders relatively simple resulting pressure equation as well as free surface closure. Numerical accuracy with respect to wave nonlinearity is tested against the fifth-order Stokes solution in a two-dimensional numerical wave tank. Numerical applications center on the evolution of nonlinear waves including diffraction and reflection affected by the curvature of side wall in a circular channel comparing with linear waves. Except for a highly nonlinear bichrmatic wave, the model's results are in good agreement with superimposed analytical solution that neglects nonlinear effects. Through the numerical simulation of the highly nonlinear bichramatic wave, the model shows its capability to investigate the evolution of nonlinear wave groups in a circular channel.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.129-139
• /
• 2008

The purpose of the present work is to derive the reflection and transmission coefficients of $S_0\;and\;A_0$ mode Lamb waves in relation to the geometry of a rectangular notch when the waves propagate across the notch in an elastic plate. Firstly, the excitable modes of the Lamb wave were analyzed with respect to the plate thickness. The scattering phenomena were divided into three independent processes according to the boundary shape of the notch and the direction of the wave propagation. Linear equations for each process were derived with corresponding free or continuous boundary conditions to analyze the scattered waves. By the rule of linear superposition, the waves scattered at each process were summed for each mode. Then the steady-state reflection and transmission coefficients of the scattered waves were determined so that the difference of energy flux between the incident and the scattered waves would remain within 4%.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.3
• /
• pp.37-45
• /
• 2000

In recent years two reflection methods, i.e. GPR and seismic Impact-Echo, are usually performed to obtain the information about tunnel lining structures composed of concrete lining, shotcrete, water barrier, and voids at the back of lining. However, they do not lead to a desirable resolution sufficient for the inspection of tunnel safety, due to many problems of interest including primarily (1) inner thin layers of lining structure itself in comparison with the wavelength of source wavelets, (2) dominant unwanted surface wave arrivals, (3) inadequate measuring strategy. In this sense, seismic physical modeling is a useful tool, with the use of the full information about the known physical model, to handle such problems, especially to study problems of wave propagation in such fine structures that are not amenable to theory and field works as well. Thus, this paper deals with various results of seismic physical modeling to enable to show a possibility of detecting the inner layer boundaries of tunnel lining structures. To this end, a physical model analogous to a lining structure was built up, measured and processed in the same way as performed in regular reflection surveys. The evaluated seismic section gives a clear picture of the lining structure, that will open up more consistent direction of research into the development of an efficient measuring and processing technology.