• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.825-827
• /
• 2000

자성체를 포함하는 자기 시스템을 해석하는데 있어 비선형과 히스테리시스(Hysteresis)는 매우 중요한 역할을 한다. 특히 재질의 히스테리시스 특성을 유한요소법(FEM)을 이용하여 계산하기 위해서 많은 방법들이 소개되었다. 단순 반복법이나 Fixed Point Technique(FPT), M-iteration 법. 뉴튼 랍슨 (Newton-Raphson) 법 등이 그 예이다. 이 방법들 중에서 뉴튼 랍슨법은 빠른 수렴 특성으로 가장 많이 사용되고 있다. 하지만 뉴튼-랍슨법을 이용하여 히스테리시스 재질을 해석할 때는 매 반복 계산 때마다 계 계수행렬(System Stiffness matrix)이 변화하기 때문에 요소의 수가 매우 많을 경우 역행렬을 계산하기 위한 시간이 많이 소요되는 단점이 있다. 특히 히스테리시스 해석의 경우에는 주로 time-step법을 이용하여 계산하므로 가장 시간이 많이 소요되는 행렬 계산 시간을 단축함으로써 전체 계산 시간을 크게 줄일 수 있다. 최근 비선형 해석에서 TLM(Transmission Line Modeling)법이 도입되어 비선형 해석 시의 계산 시간을 크게 단축할 수 있게 되었다. 본 논문에서는 비선형 해석에 적용된 TLM법을 히스테리시스 해석에 적용하는 방법을 새로 제안한다. TLM법은 뉴튼-랍슨법과 달리 각 반복 계산 때마다 계수행렬식이 변화하지 않고 단지 구동항만 변하기 때문에 행렬의 LU를 한 번 저장해 두면 forward와 backward substitution만 시행하면 된다. 따라서 요소의 수가 증가할 경우 TLM법을 사용하면 뉴튼-랍슨법에 비해 매우 큰 계산 이득을 얻을 수 있다. 본 논문에서는 TLM법을 히스테리시스에 적용하는 방법을 기술하고 간단한 모델에 이 방법을 적용하여 뉴튼-랍슨법과의 비교를 통해 TLM법의 효용성을 보인다.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.139-146
• /
• 1998

This paper proposes a regularized iterative image restoration using method of conjugate gradient considering a priori information. Compared with conventional regularized method of conjugate gradient, this method has merits to prevent the artifacts by ringing effects and the partial magnification of the noise in the course of restoring the image degraded by blur and additive noise. Proposed method applies the constraints to accelerate the convergence ratio near the edge portions, and the regularized parameter suppresses the magnification of the noise. As experimental results, I show the superior convergence ratio and the suppression by the artifacts of the proposed method compared with conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.8
• /
• pp.868-876
• /
• 2016

MUSIC (multiple signal classification) algorithm is a representative algorithm estimating the angle of arrival using the eigenvalues and eigenvectors. Generally, the eigenvalues and eigenvectors are obtained through the eigen-analysis, but this analysis requires high computational complexity and late convergence time. For this reason, it is almost impossible to construct the real-time system with low-cost using this approach. Even though QR iteration is considered as the eigen-analysis approach to improve these problems, this is inappropriate to apply to the MUSIC algorithm. In this paper, we analyze the problems of conventional method based on the eigenvalues for convergence decision and propose the improved decision algorithm using the eigenvectors.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.473-480
• /
• 2003

Iterative reconstruction methods have played a prominent role in emission computed tomography due to their remarkable advantages over the conventional filtered backprojection method. However, since iterative reconstructions typically are comprised of repeatedly projecting and backprojecting the data, the computational load required for reconstructing an image depends highly on the performance of the projector-backprojector pair used in the algorithm. In this work we compare quantitative performance of representative methods for implementing projector-backprojector pairs. To reduce the overall cost for the projection-backprojection operations for each method, we investigate how previously computed results can be reused so that the number of redundant calculations can be minimized. Our experimental results demonstrate that the ray tracing method not only outperforms other methods in computation time, but also provides improved reconstructions with good accuracy.

• Journal of Advanced Navigation Technology
• /
• v.13 no.1
• /
• pp.62-67
• /
• 2009

The demand for high performance computer grows to solve large linear systems of equations in such engineering fields - circuit simulation for VLSI design, image processing, structural engineering, aerodynamics, etc. Many various parallel processing systems have been proposed and manufactured to satisfy the demand. The properties of linear system determine what algorithm is proper to solve the problem. Direct methods or iterative methods can be used for solving the problem. In this paper, an intelligent parallel iterative method for solving linear systems of equations with large sparse matrices is proposed and its efficiency is proved through simulation.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.6
• /
• pp.1105-1112
• /
• 2011

Mack (1981), Skilling and Wolfe (1977, 1978) proposed typical nonparametric method in randomized block design with replications. In this paper, we proposed the procedures based on placement as extension of the two sample placement tests described in Orban and Wolfe (1982) and treatment versus control tests described in Kim (1999). Also Monte Carlo simulation study is adapted to compare power of the proposed procedure with those of previous procedures.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.28-35
• /
• 2013

The Krylov-Schur algorithm has been applied to reveal the eigen-properties of the wave guide having the square cross section. The eigen-matrix equation has been constructed from FEM with the basis function of the tangential edge-vectors of the triangular element. This equation has been treated firstly with Arnoldi decomposition to obtain a upper Hessenberg matrix. The QR algorithm has been carried out to transform it into Schur form. The several eigen values satisfying the convergent condition have appeared in the diagonal components. The eigen-modes for them have been calculated from the inverse iteration method. The wanted eigen-pairs have been reordered in the leading principle sub-matrix of the Schur matrix. This sub-matrix has been deflated from the eigen-matrix equation for the subsequent search of other eigen-pairs. These processes have been conducted several times repeatedly. As a result, a few primary eigen-pairs of TE and TM modes have been obtained with sufficient reliability.

• Journal of the korean veterinary medical association
• /
• v.38 no.10
• /
• pp.892-914
• /
• 2002

의학연구에서는 여러 가지 이유로 반복측정 실험이 자주 수행된다. 저자가 대한수의학회지와 임상수의학회지에 발표된 최근 몇 년의 실험연구를 분석한 결과 상당수의 논문이 반복측정 실험계획을 활용하였지만 자료분석에서는 매우 잘못된 분석을 수행함으로써 결과의 신빙성과 객관성에 많은 문제점을 안고 있는 것으로 조사되었다. 아무리 훌륭한 실험을 수행하였다고 하더라도 실험계획에 적합하지 않는 자료분석은 논문으로서의 가치가 없음을 너무나 분명한 사실이다. 많은 국내외 저자들이 의학연구에서 자료분석의 오류가 끊임없이 지적하였음에도 불구하고 이에 대한 교육 부재와 필요성에 대한 인식부족은 여전하다. 본 원고에서는 의학연구에서 흔하게 접하는 두가지 예제를 들어 반복측정 실험계획의 기본원리와 분석법 및 결과의 해석에 초점을 맞추어 설명하고자 한다. 본 실험계획법에 대하여 관심이 있는 독자는 저자에게 연락하면 자세한 논의를 할 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.5
• /
• pp.375-380
• /
• 2007

The nonlinear aerodynamic analysis of wing with control surface is performed using the frequency-domain panel method. To take into consideration the nonlinear aerodynamic characteristics of wing an iterative decambering approach is introduced. The iterative decambering approach uses the known aerodynamic characteristics of airfoil to calculate the aerodynamic characteristics of wing. The multi-dimensional Newton iteration is used to account for the coupling between the different sections of wing. The present method is verified by showing that it produces results that are in good agreement with experiments. The present method will be useful for the analysis of aircraft in the conceptual design because the present method can calculate promptly the nonlinear aerodynamic characteristics of wing with a few computing resources.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.391-394
• /
• 1998

본 논문에서는 극심한 가산 잡음에 의해 손상된 음성 신호를 스펙트럼 차감법으로 개선할 때, 잡음 스펙트럼 추정을 위한 무음 구간 추정 방법을 제안한다. 스펙트럼 차감법은 잡음을 효과적으로 제거한다고 알려져 있으나, SNR 0 dB 이하의 잡음 환경에서는 무음 구간의 검출이 힘들어 잡음 스펙트럼 추정치의 정확도가 저하된다. 일반화 스펙트럼 차감법의 과차감(oversubtraction)과 잡음 스펙트럼 추정을 반복하여 얻은 무음 구간은 SNR -10 dB~ 0 dB의 낮은 SNR에서도 비교적 정확하며, 프레임 에너지를 이용한 무음 검출 방법에 비해 향상된 성능을 보였다.