• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.311-316
• /
• 2008

Ratcheting is a cyclic accumulation of strain under a cyclic loading. It is a kind of mechanisms which generate cracks in rail steels. Though some experimental and numerical study has been performed, modeling of ratcheting is still a challenging problem. In this study, an elastic-plastic constitutive equation with non-linear kinematic hardening equation was applied. Contact stresses in wheel-rail were analyzed. Under the tangential stress of the contact stresses, a cyclic stress-strain relation was obtained by using the model. A constant ratcheting strain per cycle was accumulated.

• The Korean Journal of Applied Statistics
• /
• v.15 no.2
• /
• pp.297-310
• /
• 2002

Liang and Zeger proposed generalized estimating equations(GEE) for analyzing repeated data which is discrete or continuous. GEE model can be extended to model for repeated categorical data and its estimator has asymptotic multivariate normal distribution in large sample sizes. But GEE is based on large sample asymptotic theory. In this paper, we study the properties of GEE estimators for repeated ordinal data in small sample sizes. We generate ordinal repeated measurements for two groups using two methods. Through Monte Carlo simulation studies we investigate the empirical type 1 error rates, powers, relative efficiencies of the GEE estimators, the effect of unequal sample size of two groups, and the performance of variance estimators for polytomous ordinal response variables, especially in small sample sizes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.330-330
• /
• 2016

투명전극은 디스플레이, 터치스크린, 태양전지 등 폭넓은 분야에서 응용되고 있어 현재 각광 받는 연구 주제 중 하나이다. 특히, ITO(인듐산화물)을 이용한 투명전극은 뛰어난 효율성 때문에 가장 주목 받고 있는 전극 형태 중 하나이다. 그러나 ITO투명전극은 인듐 소재의 희소성으로 인한 자원고갈문제 및 복원력, 투명도 등에서 취약점을 지니고 있는 것으로 보고되어 있다. 이러한 ITO 투명전극의 취약점을 보완하고, 동시에 플렉서블 디스플레이(Flexible Display) 소자에 적용 가능한 대체 투명전극에 관한 연구는 현재 가장 주목할 만한 가치가 있는 연구분야로 부각되고 있다. 본 연구에서는 대체 투명전극 중 하나로 그래핀 투명전극(Graphene Transparent Electrode)을 주목했다. PEN(Polyethylene Naphthalate) 투명기판 상에 Wet-Transfer형식으로 그래핀을 전사하여 그래핀 투명전극을 구현했으며, 복원력 확인을 위해 그래핀에 2가지 (Compressive/Tensile) 압력을 가하며 구부러짐 실험(Bending Test)을 진행하며 그래핀 투명전극의 저항값을 측정했다. 일반 금속전극의 경우, 일정한 수준 이상의 압력 또는 구부러짐이 반복되는 실험의 횟수가 증가되면 원래의 복원력을 상실하며, 저항값이 상승하는 것으로 보고된바 있다. 그러나 이번 연구에서는 그래핀 투명전극을 사용해 PEN 기판 위에 투명전극을 제작한 경우, 일정한 수준의 구부러짐 반복횟수(~1,000회) 및 구부러짐 정도(~10%) 하에서 저항값이 일정하게 유지됨을 확인할 수 있었다. 별도로, 기존에 알려져 있던 순수 그래핀(Pristine Graphene)의 취약점 중 하나인 높은 저항값을 우려하여 본 연구에서는 그래핀에 도핑을 하고, 그 영향을 분석해 보았다. 그 동안 그래핀 도핑법에 대한 적지않은 연구들이 진행되었으며, 본 연구에서는 TFSA(Bis(trifluoromethanesulfonyl)amide)라는 물질을 이용한 그래핀 도핑법을 채택했다. 실험 결과, 도핑된 그래핀 투명전극은 위와 같은 수준의 그래핀 본연의 복원력을 유지하면서 저항값은 순수 그래핀 대비 약 70% 정도 낮아짐을 확인할 수 있었다. 본 연구를 통해 그래핀 투명전극이 그래핀 고유의 특성인 높은 투명도와 복원력, 도핑으로 인한 저항값 감소가능성을 확인함으로써, 그래핀 투명전극이 ITO 투명전극의 좋은 대체자가 될 수 있는 가능성을 확인할 수 있었다.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.6
• /
• pp.1195-1205
• /
• 2014

Compared with single design, powers of rank transformed statistic for testing main and interaction effects for $2{\times}2$ factorial in $4{\times}4$ latin square design are rapidly increased as effect size and replication size are increased. In general powers of rank transformed statistic are superior without regard to the diversified effect composition and the type of error distributions as nontesting factors are few and effect size are small. Powers of rank transformed statistic show much higher level than those of parametric statistic in exponential and double exponential distributions. Further powers of rank transformed statistic are very similar with those of parametric statistic in normal and uniform distributions.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.2
• /
• pp.207-217
• /
• 2003

The Concrete Filled Steel Tube (M) Column has excellent structural capacities that are in accordance with the interaction effect between the steel tube and concrete. CFT structure has been focussed on a struc tural system for high-rise buildings. The purpose of this study is to evaluate the strength and deformation capacities of CFT columns that are subject to constant axial and cyclic lateral load. The test parameters are diameters to the thickness ratio of the steel tube, axial load ratios, and the shapes of the tube. Total eighteen specimens were fabricated to clarify the energy absorption capacity of the CFT columns. Experimental results were summarized for their ultimate strengths and deformation capacities.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.596-602
• /
• 2003

A Polymeric emulsifier was synthesized by solution polymerization with 2-ethylhexyl acrylate, n-butyl acrylate, and acrylic acid. A series of polymeric emulsifier have been used in the emulsion copolymerization of 2-ethylhexyl actryacrylate and n-butyl acrylate. The size of the synthesized latex particles was around 145 nm and its distribution was very narrow. Emulsion with polymeric emusifier showed no coagulum after 7 cycles of freeze-thaw test, while the emulsion with traditional emulsifier exhibited coagulum after 2 cycles. The adhesion tests showed that the initial tackiness and peel strength decreased as the molecular weight and acrylic acid content of polymeric emulsifier increased, whereas the holding power increased.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.299-300
• /
• 2022

구조물의 내진보강방법 중에서 가장 널리 이용되는 방법인 강재 이력형 감쇠장치는 수평하중에 대한 응력-변위 곡선을 이용하여 지진 에너지를 소산시키는 방법인데, 이 경우 편심하중 등에 의해서 부재가 면 외 방향으로 거동하여 응력-변위곡선이 불규칙하여 그 결과의 신뢰성이 떨어지는 경우가 있다. 이러한 형상을 방지하기 위해서는 별도의 채널(Channel)을 시공하는 불편함을 감수해야 하며, 또한 수평력이 반복적으로 작용할 때 그 효과를 장담할 수 없는 문제점이 있다. 본 연구에서는 강재 스트립과 스프링을 결합한 댐퍼를 고안하여 스프링은 탄성변형을, 강재 스트립은 소성변형을 받게 하는 혼합형 댐퍼를 개발하고자한다. 여기서, 스프링은 복원력으로 작용하여 반복하중에 대한 저항성을 키우고 강재 스트립의 하중변위 곡선을 규칙적으로 하는 역할을 수행하게 되며 에너지 소산량을 계산할 때 편리함과 정확도를 높이고자 한다. 강재 스트립의 폭과 길이는 일정하지만 두께를 변화시켜서 5종류를 선택하였으며, 댐퍼 1개당 3개의 스트립을 정삼각형 형태로 배치하고 그 중심에 상당한 강성을 갖는 스프링을 갖는 형태로 제작하였다. 댐퍼 시험체는 5개를 제작한 후, 이 댐퍼를 구조물에 배치하였을 때의 지진에 대한 에너지 소산량과 부재력을 검토하여 댐퍼의 안전성(Safety)를 검증하고자 한다.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.137-142
• /
• 2007

한정된 주의력 자원을 회복 시키기 위한 방법 중 피드백이 효과가 있는 것으로 보고되고 있다. 그러나 피드백의 구체적 내용에 대한 집중력 회복의 연구는 미미하다. 본 연구는 집중력을 회복할 수 있는 감각적 자극 중 정서적 피드백 간의 효과 차이를 분석 하였다. 집중력을 평가하기 위한 온라인 실험 시스템을 구축하고 시각, 청각, 촉각 피드백 자극을 제시하여 각각의 감각자극과 집중력 회복의 효과를 분석 하였다. 실험 참여자의 감각 피드백의 선호도에 따른 영향 요인을 알아보기 위하여 실험 후 주관적 설문을 실시하였다. 감각 피드백을 6명의 대학원생에게 일주일에 걸쳐 반복적으로 약200개의 자극을 제시하고 5회 이상 실험을 통하여 얻어진 30회 결과를 분석하였다. 결과적으로 피드백 별 수행 수준에서는 청각, 촉각, 시각 순으로 효과가 높았으며, 반응 시간에서는 촉각, 청각, 시각 순으로 효과적으로 나타났다.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.523-530
• /
• 2002

Repeatabilities and Correlations among Average Daily Gain, Backfat Thickness and Lean Percent in Swine The repeatability, correlation and rank correlation coefficients among average daily gain, backfat thickness and lean percent were estimated on the basis of records tested from August 1999 to February 2000 with 695 pigs of Duroc, Landrace and Yorkshire boars and gilts tested at 2nd Korea Swine Test Station located in Ha-dong, Kyeongnam Province. The effect of the sex, breed and month of measured were estimated by the least square method. The repeatabilities were estimated from the component of variance among repeated measurements of the trait for the same animal. The results obtained are summarized as follow ; 1. The means of the major economic traits studied were 142.1 days, 173.7 days and 182.5 days for age at 1st, 2nd and 3rd measure, 57.9%, 56.2% and 55.2% for lean percent at 1st, 2nd and 3rd measure, 1.33cm, 1.61cm and 1.63cm for backfat thickness at 1st, 2nd and 3rd measure, 946.6g, 879.2g and 879.4g for average daily gain at 1st, 2nd and 3rd measure, respectively. 2. The correlation coefficients between the backfat thicknesses measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.424, 0.700 and 1.424, respectively. The correlation coefficients between the lean percent measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.493, 0.619 and 0.471, respectively. The correlation coefficients between the average daily gain measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.716, 0.861 and 0.601, respectively. 3. The rank correlation coefficients between backfat thickness measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.438, 0.693 and 0.441, respectively. The rank correlation coefficients between lean percent measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.508, 0.593 and 0.478, respectively. The rank correlation coefficients between average daily gain measured at 1st and 2nd, at 2nd and 3rd, at 1st and 3rd were 0.704, 0.834 and 0.571, respectively. 4. The estimated repeatabilities of the traits studied were 0.428 for the lean percent, 0.374 for the backfat thickness and 0.673 for the average daily gain, respectively.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.6
• /
• pp.459-465
• /
• 2016

In this paper, it was performed the fatigue test to examine the effect of cyclic loading for the simple T-joint. Axial force of bolt by clamping and the change of the force by applied load were measured in the joint. And the bolt force, the failure mode and the fatigue strength under cyclic loading were investigated. The parameters of the tension joint were set to be the flange thickness and the diameter of bolt to a different stiffness of the joint in response to the combination. From the fatigue test, failure mode of tensile joints under cyclic loading could be evaluated using a static ultimate load of the specific failure mode in EC3. The fatigue strength of the tension joints was considerably higher than the fatigue strength of the EC3(36) that does not consider a lever action. However, the additional axial force by lever action occurs to an increase in the axial force of the bolt it requires a careful evaluation of the fatigue strength.