• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.369-377
• /
• 1999

Recently, it is gradually raised necessity that thickness of thin film is measured accuracy and managed in industrial circles and medical world. Ultrasonic signal processing method is likely to become a very powerful method for NDE method of detection of microdefects and thickness measurement of thin film below the limit of ultrasonic distance resolution in the opaque materials, provides useful information that cannot be obtained by a conventional measuring system. In the present research. considering a thin film below the limit of ultrasonic distance resolution sandwiched between three substances as acoustical analysis model, demonstrated the usefulness of ultrasonic signal processing technique using information of ultrasonic frequency for NDE of measurements of thin film thickness. Accordingly, for the detection of delamination between the junction condition of boundary microdefect of thin film sandwiched between three substances the results from digital image processing.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.43-55
• /
• 2003

As the development of If industries and their electronic device manufacturing technology have been accelerated recently, the request for electronic devices with small size, light weight, and high performance has been inducing that electronic package and substrate (PCB) companies have to develop substrates with low cost, high dense I/O, excellent thermal properties and electrical properties. Therefore, world-wide chip makers have been setting their own severe reliability standards and requiring their suppliers to keep specification and to develop green, high frequency and high-performing substrates. Because properties of substrates are dependent mainly on their constituent materials, the application of them showing superior properties is expected to satisfy the customer's requirement. Therefore, substrate companies should ensure the superiority of materials and assure their competitive capability of substrates by analyzing the latest trends of technology and properties of the materials.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.305-310
• /
• 2002

최근 첨단 반도체 패키지 공정에서는 전극형성 공정에 BGA package 시스템이 도입되고 있으며 BGA package은 잔존 flux 및 이물질의 제거공정이 필수적이다. 잔존하는 flux는 세척이 제대로 이루어지지 않을 경우 solder ball들이 고온 또는 습도에 노출되었을 때 lead, circuit board 등의 부식과 conductor Insulation 수축의 원인이 된다.(중략)

• Electrical & Electronic Materials
• /
• v.15 no.5
• /
• pp.26-31
• /
• 2002

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.14-14
• /
• 2001

• Journal of the KSME
• /
• v.45 no.6 s.295
• /
• pp.43-48
• /
• 2005

• Electrical & Electronic Materials
• /
• v.16 no.8
• /
• pp.3-9
• /
• 2003

• Electrical & Electronic Materials
• /
• v.16 no.8
• /
• pp.27-43
• /
• 2003

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.135-135
• /
• 2012

세계 환경유해물질 규제에 대응하여 반도체 substrate의 Pb-free solution의 일환으로 등장한 PPF (Pre-Plated Frame)는 패키지공정 조립성은 물론, 자동차 반도체와 같은 고 신뢰성 및 low cost 요구를 만족하기 위해 초박막 고품질의 도금층과 Sub-micro scale의 rough treatment 와 같은 미세 표면제어 기술, 그리고 Au wire로부터 Cu wire 로의 전환에 대응하는 최적화된 도금층 구조로 발전하고 있다. 이러한 기술적인 진화를 거듭해온 이 기술은 다양한 반도체 substrate에 광범위하게 사용될 수 있기 때문에 향후 PPF기술의 활용저변은 더욱 확대될 전망이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1157-1164
• /
• 2006

In this paper, we proposed a method for measuring accurate positions and sizes of package and balls in a micro BGA. To find defects of BGA accurately, we focused on finding positions of package and balls. After labeling, we detected connected components of package and balls using feature parameters. After the detection of package component, we measured position and size of package by employing rectangular model which was constructed by the package information. After the detection of the ball components, we measured positions and diameters of balls by employing circular models which were constructed by the ball informations. We did calibration based on landmarks to measure real length, and we compared the measured results with the SEM data. Finally, we found that the accuracy of the proposed method is 94% in terms of ball's radius.