• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.2
• /
• pp.141-146
• /
• 2019

Non-emissive LCDs need a backlight, and have difficulty implementing wide viewing angles due to differences in phase retardation depending on the behavior of the liquid crystals. Although wide viewing angles are good characteristics for devices such as TVs, they are not good for mobile devices. In this paper, we propose ways to design diffusers with ELC lenses to achieve wide and narrow viewing angles depending on the circumstances. A study was conducted on optimizing the design of a liquid lens diffuser with the same light as that for an OLED, by extracting design factors that affect the performance of the diffuser and applying the Taguchi method to them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4644-4652
• /
• 2014

This study examined the effects of the cement type and sand to cement ratio on the properties of grout for offshore PSC structures. Types I and III cement were used and the sand to cement ratio was varied from 0.5 to 1.5. When type I cement was used, considerable bleeding occurred on the all S/C after 3 hours and 20 hours. When type III cement was used, bleeding was reduced but the flowability decreased. A comparison of a superplasticizer containing naphthalene with that containing polycarboxylate showed that the problem of flowability could be solved using polycarboxylate.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.129-129
• /
• 2003

해양저질에서 휴면포자의 분포와 분포량에 대한 조사는 미래의 와편모조류 적조발생 시기나 장소를 예측할 수 있게 한다. 그러므로 저질내의 휴면포자를 찾고 분리하는 기술이 기본적으로 수행되어야 하며 지금까지 여러 방법이 개발되어 왔다. 이 연구의 목적은 기존의 휴면포자 계수방법들을 비교함으로써 연구의 효율을 제고 하고자 하는데 있다. 이 실험에서는 새만금 해역의 동일정점 저질내에 존재하는 휴면포자를 형광 염색하여 계수하는 Primuline 염색법, 해수, 휴면포자, sodium polytungstate의 비중차이를 이용하여 밀도구배원심법으로 분리하는 방법, 그리고 10% HCl로 탄산질을 제거하고 47% HF로 규산질을 제거한 뒤 휴면포자를 계수하는 고전적 계수방법 (palynological technique)을 사용하여 저질 내의 휴면포자를 분리 비교하였다. Primuline 염색법을 이용하였을 경우 Alexandrium famarense/catenella complex, Alexandrium sp. (spherical), Gonyaulax verior, Gonyaulax scrippsea, Gonyaulax spinifera complex등의 일부 종만 염색되어 관찰되었다. sodium polytungstate를 비중 1.3 g$cm^{-3}$으로 조정한 후 휴면포자를 분리한 밀도구배 원심법은 생물에 거의 무해한 것으로 알려져 있어서 발아가 가능해 휴면포자와 영양세포간의 관계를 규명할 수 있다는 장점이 있으나 계수에 있어서는 재현성이 떨어졌다. 반면 Palynological technique은 발아는 되지 않지만 석회질 벽을 가지는 휴면포자를 제외한 대부분의 종들이 관찰되었다. 이 결과는 실험 목적별로 휴면포자 계수방법을 달리 할 수 있음을 보여준다. 즉 발아실험을 할 경우에는 밀도구배원심법을, Alexandrium과 같은 특정종의 계수목적시에는 Primuline 염색법을, 정점 내 정확한 종 분포 파악을 위해서는 palynological technique을 사용하는 것이 효과적일 수 있다. 하지만 종분포 파악시에는 시간이 많이 소요되므로 좀더 신속하고 정확한 실험을 위해 분자생물학적인 기법들이 요구된다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1991.05a
• /
• pp.68-69
• /
• 1991

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.101.3-101.3
• /
• 2010

Glass frit은 실리콘 태양전지의 Ag/Si contact을 위해 필수적이다. 태양전지의 고효율 특성 구현 때문에, Contact resistance(Rc)가 우수한 Pb-frit의 사용이 불가피한 상황이다. 본 연구는 기존의 Pb계를 무연화함과 동시에 동등수준의 효율을 목표로 하였다. Ag 분말 size 및 glass frit의 열적 거동 특성이 SiNx 코팅층 침투와 Ag re-crystallites에 미치는 영향에 대해 평가하였다. 6 inch 다결정 실리콘 웨이퍼를 사용하였으며, softening temperture(Sp)별로 4종의 Bi계 glass frit을 제조 하였고, 분말 size가 다른 3종의 Ag powder를 선정하였다. Glass frit Sp가 $460^{\circ}C$ 이상의 경우에는 효율이 10% 미만이였으나 Sp $460^{\circ}C$ 이하에서는 16% 수준의 효율을 확인할 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.716-719
• /
• 1990

The essential oils were isolated by steam distillation from 13 spices used for curry. Antimicrobial activity of essential oils for two strains of Gram(+) bacteria, Gram(-) bacteria, lactic acid bacteria, yeast and mold were investigated by agar diffusion method. 5 spice essential oils(clove, cumin, nutmeg, oregano, rosemary) having high antimicrobial activity were selected and their minimal inhibitory concentration(MIC) were measured. Very low concentration ($0.2{\sim}9\;mg/ml$) of 5 spice essential oils were sufficient to prevent microbial growth. The data show that Gram(+) bacteria were more sensitive to the antimicrobial compounds in spices than Gram(-). But though Gram(+) bacteria, lactic acid bacteria were less sensitive to the compounds than Gram(-).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.182-194
• /
• 1999

Occupant injury in rear end impact is rapidly becoming one of the most aggravating traffic safety problems with high human suffering and societal costs. Although rear end impact occurs at relatively low speed , it may cause permanent disability due to neck injuries resulting from an abrupt moment, shear force , and tension/compression force at the occipital condyles. The analysis is performed for a combined occupant-eat model response, using the SAFE(Safety Analysis for occupant crash Environment) computer program. The computational results are verified by those from sled tests. A parameter study is conducted for many physical and mechanical properties. Seat design has been performed based on the design of experiment process with respect to five parameters; seat-back upholstery stiffness, torsional stiffness of the seat-back. An orthogonal array is selected from the parameter study. A good design has been found from the analysis results based on the orthogonal array. The results show that reductions of stiffness in seat-back upholstery and joint are the most effective for preventing neck injuries.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1256-1261
• /
• 2004

Nonlinear Response Optimization using Equivalent Static Loads (NROESL) method/algorithm is proposed to perform optimization of non-linear response structures. It is more expensive to carry out nonlinear response optimization than linear response optimization. The conventional method spends most of the total design time on nonlinear analysis. Thus, the NROESL algorithm makes the equivalent static load cases for each response and repeatedly performs linear response optimization and uses them as multiple loading conditions. The equivalent static loads are defined as the loads in the linear analysis, which generates the same response field as those in non-linear analysis. The algorithm is validated for the convergence and the optimality. The function satisfies the descent condition at each cycle and the NROESL algorithm converges. It is mathematically validated that the solution of the algorithm satisfies the Karush-Kuhn-Tucker necessary condition of the original nonlinear response optimization problem. The NROESL algorithm is applied to two structural problems. Conventional optimization with sensitivity analysis using the finite difference method is also applied to the same examples. The results of the optimizations are compared. The proposed method is very efficient and derives good solutions.

• Annals of Clinical Neurophysiology
• /
• v.17 no.1
• /
• pp.24-27
• /
• 2015

Amyloidosis is a systemic disorder associated with clonal plasma cell dyscrasia. Nephrotic syndrome, congestive heart failure, autonomic and peripheral neuropathy is often associated features in amyloidosis. Early diagnosis is most important because of different prognosis by stage. The diagnosis can be delayed since symptoms of amyloidosis may vary or nonspecific. We describe a patient of myeloma-associated amyloidosis, who showed orthostatic intolerance as the first symptom of the disease.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1262-1269
• /
• 2003

In structural optimization, static loads are generally utilized although real external forces are dynamic. Dynamic loads have been considered in only small-scale problems. Recently, an algorithm for dynamic response optimization using transformation of dynamic loads into equivalent static loads has been proposed. The transformation is conducted to match the displacement fields from dynamic and static analyses. The algorithm can be applied to large-scale problems. However, the application has been limited to size optimization. The present study applies the algorithm to shape optimization. Because the number of degrees of freedom of finite element models is usually very large in shape optimization, it is difficult to conduct dynamic response optimization with the conventional methods that directly threat dynamic response in the time domain. The optimization process is carried out via interfacing an optimization system and an analysis system for structural dynamics. Various examples are solved to verify the algorithm. The results are compared to the results from static loads. It is found that the algorithm using static loads transformed from dynamic loads based on displacement is valid even for very large-scale problems such as shape optimization.