Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Optimized Design of Variable Viewing Angle Display Using Design of Experiment

실험계획법을 이용한 시야각 변환 디스플레이의 최적 설계

  • Park, Ki-Jong (Department of Electronic Engineering, Inha University) ;
  • Kim, Tae-Hyeon (Department of Electronic Engineering, Inha University) ;
  • Park, Woo-Sang (Department of Electronic Engineering, Inha University)
  • 박기종 (인하대학교 전자공학과) ;
  • 김태현 (인하대학교 전자공학과) ;
  • 박우상 (인하대학교 전자공학과)
  • Received : 2018.12.11
  • Accepted : 2018.12.28
  • Published : 2019.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Non-emissive LCDs need a backlight, and have difficulty implementing wide viewing angles due to differences in phase retardation depending on the behavior of the liquid crystals. Although wide viewing angles are good characteristics for devices such as TVs, they are not good for mobile devices. In this paper, we propose ways to design diffusers with ELC lenses to achieve wide and narrow viewing angles depending on the circumstances. A study was conducted on optimizing the design of a liquid lens diffuser with the same light as that for an OLED, by extracting design factors that affect the performance of the diffuser and applying the Taguchi method to them.

Keywords

JJJRCC_2019_v32n2_141_f0001.png 이미지

Fig. 1. Schematic diagram for narrow viewing angle and wide viewing angle.

JJJRCC_2019_v32n2_141_f0002.png 이미지

Fig. 2. The structure of ELC lens.

JJJRCC_2019_v32n2_141_f0003.png 이미지

Fig. 3. Main effects plot of S/N ratio.

JJJRCC_2019_v32n2_141_f0004.png 이미지

Fig. 4. Phase retardation distribution of ELC diffuser and ideal diffuser.

JJJRCC_2019_v32n2_141_f0005.png 이미지

Fig. 5. Normalized luminance for viewing angle (a) OLED, (b) wide viewing angle mode, (c) conventional LCD, and (d) narrow viewing angle mode.

Table 1. Factor and factor level.

JJJRCC_2019_v32n2_141_t0001.png 이미지

Table 2. Orthogonal array table of L18(21 × 35) .

JJJRCC_2019_v32n2_141_t0002.png 이미지

Table 3. Condition of experiment and measurement data.

JJJRCC_2019_v32n2_141_t0003.png 이미지

Table 4. Optimum conditions of experiments.

JJJRCC_2019_v32n2_141_t0004.png 이미지

References

  1. H. K. Hong, S. M. Jung, B. J. Lee, H. J. Im, and H. H. Shin, Soc. Inf. Disp. Int. Symp. Dig. Tech. Pap., 39, 348 (2008) [DOI: https://doi.org/10.1889/1.3069666]
  2. Y. Gao, Z. Luo, R. Zhu, Q. Hong, S. T. Wu, M. C. Li, S. L. Lee, and W. C. Tsai, J. Disp. Technol., 11, 315 (2015). [DOI: http://doi.org/10.1109/JDT.2015.2408993]
  3. R. Zhu, Q. Hong, Y. Gao, Z. Luo, S. T. Wu, M. C. Li, S. L. Lee, and W. C. Tsai, Opt. Express, 23, 14070 (2015). [DOI: https://doi.org/10.1364/OE.23.014070]
  4. G. Taguchi (Edited by Don Clausing, Technical Editor for the English Edition), System of Experimental Design: Engineering Methods to Optimize Quality and Minimize Costs (UNIPUB, Kraus International Publications, 1987).