• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.118-125
• /
• 2018

This study aimed to obtain data for a comparative analysis of the properties of bio aviation fuel to be developed in the future by measuring and comparing the ignition delay times of various presently used aviation fuels. In the case of petroleum-based aviation fuel, the ignition delay time of exo-THDCP was 4.92 ms, which was 3.42 times longer than 1.44 ms of Jet A-1 at $590^{\circ}C$ / 55 bar. In the case of foreign bio aviation fuel, the ignition delay time of 11POSF7629 was the longest (1.16 ms), while the ignition delay time of 10POSF6308 (1.06 ms), 12POSF7720 (1.07 ms), and 07POSF5172 (1.05 ms) were similar.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.2
• /
• pp.13-20
• /
• 2019

In this study, the ignition delay time of blended aviation fuels was measured and analyzed to confirm the characteristic of ignition delay according to the blending ratio of bio-aviation fuel to petroleum-based aviation fuel. The ignition delay time of bio-aviation fuel(Bio-6308) was shorter than that of petroleum-based aviation fuel(Jet A-1) at all measured temperatures; further, the ignition delay time of the blended aviation fuels shortened as the ratio of Bio-6308 increased. It was confirmed that the aromatic compounds constituting the Jet A-1 affect these results; this was done by comparing the obtained ignition delay time with that of n-heptane/Toluene.

• Journal of the KSME
• /
• v.55 no.7
• /
• pp.32-36
• /
• 2015

최근 화석 연료의 과다 사용에 따른 에너지 자원 고갈 및 환경오염에 대한 우려가 증가함에 따라 비화석연료 기반의 재생가능하고 지속가능하며, 환경친화성이 높은 에너지에 대한 관심이 급증하고 있다. 농산폐기물, 폐목재, 에너지작물, 도시고형폐기물, 미세조류, 거대조류 등 육상 및 해상에서 발생하는 바이오매스는 재생가능한 에너지원으로서 화석원료와는 달리 사용 후 발생하는 이산화탄소를 다시 흡수하는 탄소중립(carbon-nutral)의 특성을 갖고 있어 전세계적으로 많은 주목을 받고 있다. 바이오연료 중 당질계원료를 이용하는 바이오에탄올 및 식물성유지를 이용하는 바이오디젤은 현재 상업적인 생산이 이루어지고 있으나, 이들 1세대 바이오연료는 식량자원과의 경쟁이라는 원천적인 한계를 가지고 있고, 분자구조식에 산소를 포함하고 있기 때문에 기존 화석원료에서 출발하는 가솔린, 항공유 및 디젤과 비교하였을 때 에너지 함량이 낮은 단점이 있다. 따라서 기존 1세대 바이오연료에서 탈피하여, 식량자원과 경쟁이 없으며, 또한 분자구조식에 산소를 적게 포함하거나 아예 포함하지 않는 바이오연료("drop-in" 바이오연료) 생산에 많은 관심이 집중되고 있다. 이 글에서는 최근 그린공정으로 대표되는 초임계 유체를 이용한 "drop-in" 바이오연료를 제조하기 위한 바이오매스 액화의 기술동향을 소개하고자 한다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.32 no.2
• /
• pp.151-158
• /
• 2024

Microalgae are aquatic microorganisms capable of photosynthetic growth using water, carbon dioxide and sunlight, and can replace petroleum for transportation. It is receiving great attention as a potential next-generation biological resource. The microalgae biodiesel production process is largely based on the development of highly efficient strains and mass production. It consists of cultivation, harvesting, oil extraction, fuel conversion and by-product utilization. Currently, microalgae diesel is 3-5 times more expensive than petroleum diesel. However, with the optimization of each element technology and the development of integrated systems, not only biofuels, but also industrial materials, wastewater treatment, and greenhouse gases As application expands to various fields such as abatement, the timing of commercialization may be brought forward. Oil prices have recently fallen due to the influence of sail gas. Although there has been a significant drop, global warming is an urgent challenge for current and future generations. In particular, Korea, which does not have oil resources, We must always prepare for political environmental changes, high oil prices, and energy crises. In this paper, the need for eco-friendly biofuel for carbon dioxide conversion. In addition to research trends, domestic and international research trends, and economic prospects, the concept of microalgae and the element technologies of the biodiesel production process are briefly discussed introduced.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.307-310
• /
• 2010

The research for production of jet fuel from petroleum displacement resources such as bio-mass, coal, natural gas mainly consists of three sub-research areas; the fisrt step is the pretreatment for producing a synthetic gas, and the next step is the Fischer-Trophsh reaction process for making hydrocarbons. The last is the upgrading technology for the hydrocarbons to fit a jet fuel specification via cracking and isomerization reactions. This talk presents reaserch trends and main technologies for production of jet fuel derived from petroleum displacement resources.

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.472-478
• /
• 2023

The usage of jet fuel has been increasing with increasing passenger and logistics movements under globalization. CO₂, which is the main global warming gas from aircraft, was charged about 3.5% of total global CO₂ emissions and 12% of transportation fuel emissions. For these reasons, a lot of governments and the international civil aviation organization (ICAO) are trying to reduce CO₂ emissions via the introduction of bio-jet fuel. In this paper, we showed the jet fuel properties, specifications, and presentative production methods of bio-jet fuel such as alcohol to jet (ATJ), oil to jet (OTJ), gas to jet (GTJ) and sugar to jet (STJ). Also, we described the status of global and domestic bio-jet fuel usage and the policy plan for efficient distribution.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.620-627
• /
• 2019

In this study, ignition delay characteristics of various bio aviation fuels (Bio-ADD, Bio-6308, Bio-7720) produced by HEFA process using different raw materials were compared and analyzed. In order to confirm the feasibility of applying bio aviation fuel to actual system, ignition delay characteristics of petroleum-based aviation fuel (Jet A-1) and blended aviation fuel (50:50, v:v) also analyzed. Ignition delay time of each aviation fuel was measured by using CRU, surface tension measurement and GC/MS and GC/FID analysis were performed to interpret the results. As a result, ignition delay time of Jet A-1 was the longest at all temperature because it contains aromatic compounds about 22.8%. The aromatic compounds can produce benzyl radical which is thermally stable and has low reactivity with oxygen during decomposition process. In the case of bio aviation fuels, ignition delay times were measured similarly because the ratio of n-paraffin/iso-paraffin constituting each aviation fuel is similar (about 0.12) and the composition ratio of cycloparaffin also has no difference. In addition, ignition delay times of blended aviation fuels (50:50, v:v) were measured close to the mean value those of each fuel so it was confirmed that it can be applied without any changing or improving of existing system.

• Prospectives of Industrial Chemistry
• /
• v.24 no.2
• /
• pp.10-21
• /
• 2021

최근 폐플라스틱의 사용량 증가와 미세플라스틱으로 인한 해양 오염 및 생태계 축적 등의 부정적인 영향으로 인해 플라스틱 업사이클링(upcycling) 및 리파이너리(refinery) 기술에 대한 관심이 증가하고 있다. 화학적 재활용 방법 중의 하나로, 폐플라스틱의 열분해를 통해서 재생 연료 및 화학물질을 생산하는 연구는 90년도에 활발히 진행된 바 있고, 최근의 환경오염에 대한 대응으로서 다시 많은 관심을 받고 있다. 폐플라스틱을 효율적으로 분해하기 위해서는 촉매를 사용하여 분해 속도를 제어해 주어야 하며, 사용된 촉매의 특성에 따라 최종 생성물의 성상이 크게 달라진다. 본 기고문에서는 폐플라스틱의 촉매 열분해를 통해 가솔린, 디젤유 및 항공유와 같은 수송용 연료, 발전용 연료 혹은 방향족 화학 물질을 생산하는 기술들의 최신 연구 동향을 다루고 향후 전망에 대해 기술하고자 한다. 아울러 최근 몇 년간 많은 연구가 있었던 바이오매스와 폐플라스틱의 혼합열분해를 통한 하이브리드 촉매 공동 열분해 기술에 대해서도 다루고자 한다.

• Clean Technology
• /
• v.25 no.3
• /
• pp.238-244
• /
• 2019

In this study, the ignition characteristics of petroleum-based aviation fuel (Jet A-1), bio aviation fuel (Bio-6308), and blended aviation fuel (50:50, v:v) were analyzed in accordance with change of temperature and pressure. The ignition delay time of each aviation fuel was measured by combustion research unit (CRU) and the compositions of the fuels were analyzed by GC/MS and GC/FID for qualitative and quantitative results. From the results, it was confirmed that the ignition delay times of all aviation fuels were shortened with increasing temperature and pressure. In particular, the effect of temperature was larger than the effect of pressure. Also, the ignition delay time of Jet A-1 was the longest at all measurement conditions, and it was judged that this result is because of the structurally stable characteristics of the benzyl radical generated during the oxidation reaction of the aromatic compound (about 22.48%) in Jet A-1. Also, it was confirmed that Jet A-1 had no section where the degree of shortening of ignition delay time was decreased by increasing temperature, which was because the benzyl radical inhibits the response that can affect the negative temperature coefficient (NTC). The ignition characteristics of blended aviation fuel (50:50, v:v) showed a similar tendency to those of Jet A-1, rather than to those of Bio-6308, so that the blended aviation fuel (50:50, v:v) can be applied to the existing system without any change.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.247-251
• /
• 2015

본 논문에서는 항공기의 3자유도 질점 모델과 Dubins 곡선을 이용한 3차원 경로생성 알고리즘 및 비선형 경로추종 유도기법을 통합하여 항공기의 경로계획을 위해 적용한 경로생성 알고리즘을 검증하고, 경로추종 성능과 항공교통관리를 위한 시뮬레이션에 3자유도 질점 항공기 모델 사용의 타당성을 확인하였다. 최적경로 생성을 위해 사용된 Dubins 곡선의 경우 계산속도가 빠르고 경로계획에 바로 적용이 가능하다는 장점이 있다. 하지만 주로 2차원 상의 경로문제를 다루기 때문에 이를 3차원 비행경로로 확장시킨 알고리즘을 사용하였다. 경로추종을 위한 유도제어법칙은 Specific Acceleration 명령을 통해 자세를 제어하는 비선형 경로추종 유도법칙을 활용하였으며, 이에 대한 결과를 확인하였다.