• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.504-510
• /
• 2011

In the culture performance field, device technologies for public performances with new concept is on the rise with the advancement of science. Most designers make use of the performance devices to achieve powerful and dramatic effect in their performances. It increases the perfection of performance. Most of all, applying high technology to performances' stage leads to enhance the space efficiency of the limited stage as well as to enable us to run a fully unmanned performance. This paper proposes a reconstructible electric block system for public performances' stage to heighten the fantastic stage effect variously.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.2 s.24
• /
• pp.53-61
• /
• 2007

A conventional passive TMD is only effective when it is tuned properly. In many practical applications, inevitable off-tuning of a TMD occurs because the mass in a building floor could change by moving furnishings, people gathering, etc. When TMDs are offtuned, TMDs their effectiveness is sharply reduced. Moreover, the off-tuned TMs can excessively amplify the vibration levels of the primary structures. This paper discusses the application of a new class of MR damper, for the reduction of floor vibrations duo to machine and human movements. The STMD introduced uses a MR damper called to semi-active damper to achieve reduction in the floor vibration. Here, the STMD and the groundhook algorithm are applied to a single degree of freedom system representative or building floors. The performance or the STMD is compared to that or the equivalent passive TMD. In addition, the effects of off-tuning due to variations in the mass of the floor system. Comparison of the results demonstrates the efficiency and robustness of STMD with respect to equivalent TMD.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.86-92
• /
• 2017

The possibility to development of floor vibration problem is larger in case of long span structure under service loads. Therefore, to improve the vibration performance of the floor, increasing of its thickness is a common method. But, increasing of thickness can lead to increase of slab self weight and reduce the effectiveness of the building. For this reason, attention for voided slab which reduces the self-weight is increasing. Hence, voided deck slab combined with deck plate and polystyrene void foam which has buoyancy prevention capacity and much developed construct ability has bee developed. By using the developed voided slab, vibration performance of a mock-up building structure has been investigated in the current study. The results according to analysis showed that they can be implemented in living and bedroom which are considered as 1st grade on the basis of "Residential Evaluation Guidelines for Vibration of Buildings" by the Architectural Institute of Japan.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.385-386
• /
• 2009

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.458-461
• /
• 2011

이방향 중공슬래브 시스템의 구조특성 및 성능평가 연구의 일부로 실제 건축물에 적용된 이방향 중공슬래브의 연직진동을 측정 및 분석하였다. 캡슐형 경량체를 사용한 이방향 중공슬래브가 적용된 두 건축물에서 바닥 용도상 일상적인 진동발생원이라고 가정할 수 있는 75 kg 성인의 보행, 달리기, 제자리 점프에 대해 슬래브의 연직진동을 측정하였다. 두 대상 건축물은 각각 연구소와 교육시설 용도로 설계 및 건축되었다. 측정된 수직 가속도 데이터로 일본건축학회 환경기준에 (AIJES-2004) 근거하여 진동수 범위 3~30 Hz에 대해 1/3 옥타브 밴드 분석을 실시하였다. 이 분석을 바탕으로 AIJEES-2004에 제시한 기준에 따라 바닥의 연직진동에 대한 거주 성능을 평가한 결과, 측정한 세 건축물에 적용된 이방향 중공슬래브 모두 보행과 달리기에 대해서는 피진동자의 10% 미만이 인지, 제자리 점프에 대해서는 50~70% 미만이 인지할 수 있는 것으로 나타나, 이방향 중공슬래브가 바닥의 연직 진동에 대해 거주 성능이 양호함을 보여주었다.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.549-550
• /
• 2011

본 논문은 다구찌 설계방법을 이용하여 이동식 정수 시스템의 구조물에 대한 최적설계 조건을 확보하기 위하여 유한요소해석을 수행하였다. 다구찌 설계방법은 이동식 정수 시스템 구조물의 설계인자 중 가장 큰 영향을 미치는 파라미터를 고찰하고 최적화 하는데 유용한 결과를 제시 하였다. 다구찌 설계방법으로 수행된 민감도 해석 결과에 따르면 이동식 정수 시스템 구조물의 최적설계에 필요한 중요 인자로 세로방향 보강빔의 수량을 보여주고 있다. 결과적으로 안전하면서 효율적인 이동식 정수 시스템 구조물을 제작하기 위한 최적설계 시 가로방향 보강빔 수량과 바닥판의 두께보다는 세로방향 보강빔의 수량이 매우 중요한 설계인자라는 해석결과를 제시하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.19-26
• /
• 2016

Floor damping materials used in floating floor system to diminish the floor noise have been made with low density and dynamic stiffness. Owing to this low density and dynamic stiffness, the deflection in these materials under long-term loading and cracking of the floor finishing mortar in the floating floor system may occur. This paper presents the results of long-term loading effects on the deflection of different types of floor damping materials. The experimental program involved the long-term loading tests for 490 days loading period on sixteen specimens. Specimens were classified as DM1(Damping Materials) to DM8, depending upon the four main parameters; types, bottom shapes and densities of floor damping materials and amount of loading. Results indicated that the long-term deflection of all specimens of damping materials remained unchanged after 200 days at all loading amounts, except the specimens made up of Polystrene, in which long-term deflection remained unchanged after 160 days at 250 N load and 100 days 500 N load. In this paper, two types of correlation expressions were shown in the deflection range prior to the range where deflection remained constant; two analyses by ISO 20392 and linear regression. In comparison of two analyses and experimental results on the difference of deflection of 16 specimens, the difference of deflection was below 0.4 mm in those analyses in case of that total deflection was below 10 mm. Restrictively, it was judged that the analysis for the deflection of specimens made up of Polystrene is more appropriate using ISO 20392.

• International Journal of Highway Engineering
• /
• v.4 no.3 s.13
• /
• pp.15-23
• /
• 2002

The waterproofing system's performance is known to show a determing by complex interaction of material factors, design details, and the quality of construction, and the waterproofing integrity of waterproofing membranes is determined by the bond to the deck and the amount of damage to the waterproofing membrane. In this research, the basic properties of waterproofing membranes on market and the tensile adhesive chracteristics of waterproofing systems of concrete bridge deck have also been investigated in the view of the damages frequently reported from job site. For the tensile adhesive strength of sheet waterproofing membranes, the results after asphalt concrete paving tends to increase more than before those. The results of the liquid waterproofing membranes are upside-down, and the more concrete has strength, the more strength of tensile adhesive increase. The ambient temperature of asphalt concrete when application of the waterproofing membrane has considerable influence on the performance of waterproofing system. As described above, waterproofing system can be influenced by several factors. If they are not considered under construction, the overlooking will cause the damages of pavement and waterproofing system after traffic opening.

• Journal of Korea Multimedia Society
• /
• v.14 no.8
• /
• pp.1094-1107
• /
• 2011

We can use panorama systems or image based modeling systems when we want to make 3D space model and look around result. Panorama systems make 3D model to stitch images and map cylinder or cube. The structure of 3D model, made by panorama system, is not same as structure of a real room, so user can't infer a real structure. Typically, Image based modeling systems work on a desktop computer. That makes it difficult to reconstruct 3D model in real time and take long time for processing. In this paper, we propose a 3D panorama modeling system that uses images on a mobile device. This system reconstructs a 3D space model, similar with a real room in real time, from multiple images captured part of rooms. Using this system, user can reconstruct various shape of space and look around a 3D space model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1446-1449
• /
• 2007

인정바닥구조는 신청에서부터 인정서 발급까지 기본적으로 2개월 이상이 소요되며, 신청 제품이 많을수록 그 기간은 길어지게 된다. 본 논문은 이와 같은 완충재의 성능을 확인하기 위해 소요되는 기간과 비용을 획기적으로 단축할 수 있는 간편한 방법을 제시하기 위한 것이다. 완충재 설치 이후 습식으로 시공되는 경량기포콘크리트와 모르터를 사전에 일정 크기로 제작(축소모형 시험판)한 후 골조가 완성된 현장에서 바닥충격음을 측정하는 방법이다. 완충재 2개 제품에 대하여 축소모형 시험판을 이용하여 측정한 결과와 전체 세대를 시공한 후 측정한 결과를 비교한 결과 경량충격음은 축소모형 시험판이 훨씬 낮은 결과를 나타냈지만 중량충격음은 비슷한 결과를 나타냈다. 이로써 축소모형 시험판을 이용하여 바닥충격음을 측정하는 것은 경량충격음을 저감하기 위한 재료 선정 및 제품 시스템 구성 등에 활용될 수 있을 것이며, 현장에서 중량충격음 차단성능을 신속하게 검증할 수 있는 방법으로 활용할 수 있을 것으로 기대된다.