• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.49-53
• /
• 2010

Surface plasmon resonance (SPR) which is utilized in thin film refractometry-based sensors has been concerned on measurement of physical, chemical and biological quantities because of its high sensitivity and label-free feature. In this paper, an application of SPR to detection of alcohol content in wine and liquor was investigated. The result showed that SPR sensor had high potential to evaluate alcohol content. Nevertheless, food industry may need SPR sensor with higher sensitivity. Herein, we introduced a nano-technique into fabrication of SPR chip to enhance SPR sensitivity. Using Langmuir-Blodgett (LB) method, gold film with nano-structured surface was devised. In order to make a new SPR chip, firstly, a single layer of nano-scaled silica particles adhered to plain surface of gold film. Thereafter, gold was deposited on the template by an e-beam evaporator. Finally, the nano-structured surface with basin-like shape was obtained after removing the silica particles by sonication. In this study, two types of silica particles, or 130 nm and 300 nm, were used as template beads and sensitivity of the new SPR chip was tested with ethanol solution, respectively. Applying the new developed SPR sensor to a model food of alcoholic beverage, the sensitivity showed improvement of 95% over the conventional one.

• Journal of the Korean earth science society
• /
• v.30 no.4
• /
• pp.454-463
• /
• 2009

In this study, from January 2006 to February 2009, we observed 107 ice spikes formed in a natural state, and analyzed their environment. We developed an experimental device to reproduce ice spikes in laboratory and successfully made 531 ice spikes. We analyzed the process of the formation and the principle of how those ice spikes grow through videotaped data of the formation in the experiment. In the natural world, when the surface of water and the lower part of a vessel begin to freeze, a vent (breathing hole) develops at the surface where an ice is not frozen; this vent serves as the seed of an ice spike. It is assumed that the volume expansion of ice in the vessel which occurs when water freezes makes the supercooled water go upward through the vent and becomes an ice bar called an ice spike. In the laboratory, however, when distilled water is poured into an ice tray cube and kept in the experimental device for about one and a half hours at a temperature of -12- $-13^{\circ}C$, a thin layer of ice then begins to develop on the surface of the water, the vent is formed, and ice spikes form for about 10-30 minutes. These spikes stop growing when the end becomes clogged. Ice spikes can be described as falling into seven categories of shape, with the apex type topping the list followed by the slant type in the natural state and the vertical type predominating in the laboratory.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.472-472
• /
• 2011

탁도는 물의 상대적인 흐림 정도를 나타내는 척도로서 이는 빛이 물을 통과할 때 산란시키는 부유고형물질 때문에 발생한다. 토양침식에 의하여 지표수로 유입된 토사와 광물질은 하천의 수송 및 퇴적 과정을 거치며 이동한다. 이때 하상 퇴적물은 바닥으로부터 먹이를 찾는 유기체에 의해 뒤섞이며 입자들은 일정기간동안 물의 흐름에 의해 부유상태로 남아 있게 되고, 유입되는 영양소와 빛에 의하여 성장하는 조류 또한 탁도를 증가시키는 원인이 된다. 이러한 부유물질의 증가는 수중에 태양복사에너지 전달을 방해하여 수중생태계의 먹이사슬과 저서생물의 서식환경에 많은 영향을 미치고, 수표면 온도 또한 태양으로부터 열을 흡수하는 표면 근처의 부유물질에 의해 증가하여 용존산소의 양에도 영향을 미친다. 따라서 수체내 분포하고 있는 부유물질의 종류와 양 및 공간적 분포 파악은 수질문제와 재난 예방 및 생물의 서식환경 문제를 파악하고 해결하는 데 매우 중요하다. 그러나 부유물질에 부착되어 있는 영양소, 금속, 살충제 등은 물 순환 시스템을 통하여 끊임없이 운반되고 상류유역의 흐름 조건에 따라 시공간적으로 변화하기 때문에 이를 규명하는 것이 매우 어려운 실정이다. 이러한 문제를 해결하기 위하여 광역적인 탁수환경의 분석방법으로 원격탐사(Remote Sensing, 이후 RS) 기법을 이용한 방법이 제안되고 있다. 이미 선진국에서는 광역수계의 수질관리를 위해 RS 기법을 이용하여 신속하고 정확한 수질상태 파악을 시도하고 있으며, 우리나라에서도 KOMPSAT 발사를 계기로 RS 관련 기술이 비약적으로 진화하고 있다. 그러나 RS 데이터를 활용하는데 필수적인 분광학적 특성 규명에 대한 연구는 대부분 식생과 토양에 한정되어 있으며 수체에 대한 연구는 현장조사의 어려움으로 인하여 상당히 제한적인 수준이다. 따라서 본 연구에서는 탁도의 변화에 따른 분광반사 특성을 휴대용 분광복사계를 이용하여 규명하고, 이를 Landsat 위성영상에 적용하여 새만금 유역을 대상으로 완공 직후인 2006년부터 2010년까지의 탁수환경을 모니터링 하였다. 그 결과 새만금 유역 탁수환경을 정성적으로 확인할 수 있었으며, 이를 이용하여 탁수환경 연구에 RS 기법이 효과적임을 제시하고자 한다.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.565-571
• /
• 2010

An innovative application of surfactant-enhanced air sparging(SEAS) technique was developed in this study. Using a laboratory-scale physical model packed with water-saturated sand, air sparging was implemented to remove water-dissolved toluene that was introduced into a specific depth of the system with finite vertical width prior to sparging. An anionic surfactant(Sodium dodecylbenzene sulfonate) was introduced into the contaminated layer as in dissolved form in the toluene-contaminated solution for SEAS, whereas no surfactant was applied in the control experiment. Due to the suppressed surface tension of water in the surfactant(and toluene)-containing region, the toluene removal rate increased significantly compared to those without surfactant. More than 70% of the dissolved toluene was removed from the contaminated layer for SEAS application while less than 20% of toluene was removed for the experiment without surfactant. Air intrusion into the contaminated layer during sparging was found to be more effective than that without surfactant, enhancing air contact with toluene-contaminated water, which resulted in improved volatilization of contaminant. This new method is expected to open a new option for remediation of VOC(volatile organic compound)-contaminated aquifer.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.453-469
• /
• 2019

The celadon jar with inscription of 'the Fourth Sunhwa Year' is an important chronology that shows the conditions of production of the early celadon due to the inscription on the bottom including its purpose, application, and the producer. This celadon jar has been restored several times in the past. However, concerns over the structural stability, such as the separation and level differences in the joined cracks, have risen because of the aging of the repair materials, which were subjected to various environmental changes over a long time. By examining the conditions of preservation, the major damage was identified as the '入' shaped crack on the front, the 'V' shaped restored part and the crack on its left side, and the 'J' shaped crack on the back side. In the past, the cracks were found to be joined using a refined lacquer containing camphor, drying oil, rosin, etc. mixed with soil powder. The joint line was repainted with the refined lacquer and covered with gold powder. The missing parts were restored with gypsum and colored with acrylic color. After that, the repair materials were aged and emergency treatment was performed at the National Museum of Korea in 1981. At that time, Cemedine C or Cemedine C mixed with microballoons was used for reinforcing the cracks. Conservation treatment focused on removing the past repair materials and reinforcing the physically fragile parts by joining and restoring them based on the examination of the preservation condition. in addition, the area around the restored part was colored for future exhibition.

• Journal of Korea Port Economic Association
• /
• v.37 no.3
• /
• pp.93-104
• /
• 2021

A coastal ferries, which serve as a mode between mainland and offshore islands, are frequently used by islanders and travelers visiting islands. Therefore, it is located in a place with good accessibility to the downtown so that users can use it conveniently. However, research on the built environment and walking environment of coastal ferry terminals has not been conducted to ensure that elderly islanders and general travelers can use comfortably the coastal ferry terminal. In this study, with a focus on the coastal ferry terminal space, the walking section was set as 1)the accessibility of the coastal ferry terminal, 2)the built environment for using the coastal ferry terminal, and 3)walking environment in the ferry boarding and disembarkation at the coastal ferry terminal, and 4, 5)walking environment in the ferry. An evaluation tool was developed to measure the walking environment for each walking section, and the importance and satisfaction of users were analyzed using the IPA for the Yeosu Coastal Ferry Terminal. As a result, in the process of approaching the ferry terminal, 'convenience of using public transportation by foot' and 'convenience of using signposts guiding the location and direction of the ferry terminal' were investigated as concentrated areas. On the other hand, the built environment inside the ferry terminal and the walking environment showed that the satisfaction of the users was high. Regarding the walking environment from the ferry terminal to the ferry, the 'surface walking environment of the walking path', 'convenience of walking with luggage', 'convenience of walking in the slope section', and 'convenience of walking in the ferry ramp section' showed low satisfaction. This study can be used as basic data for improving the facilities and walking environment of Yeosu Coastal Ferry Terminal and is expected to be used as data for comparative research with other coastal ferry terminals.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.51-61
• /
• 2022

Earthenware horn cups with horse head decorations were excavated from Tomb No. 7 of Bokcheon-dong, Dongraegu, Busan Metropolitan City. Made of earth in the shape of a horn, these cups are considered to have been used to drink alcohol or beverage. Large numbers of earthenware horn cups of various shapes were excavated from tombs located in the old territories of Silla and Gaya. A pair of earthenware horn cups were excavated from Tomb No. 7, and the two cups are almost identical in overall shapes and manufacturing techniques despite different sizes. Conservation treatment was carried out for the bigger one of the two horn cups this time. There are two cracks toward the horse head decorations around the mouth with missing parts observed. The chest of the horse touches the ground with one side decorating the horse head and the other side facing the conical mouth of the horn cup. It is in the U shape, striking a balance based on two legs attached behind. The surface of the horn cup was made with a potter's wheel, and the connection to the horse head has traces of cutting and trimming. The horse head is expressed realistically with its features including the ears, eyes, nose, and mouth well apprehended and its color is grey This study intended to investigate manufacturing techniques of the artifact by examining its internal structure through the condition survey in a non-destructive way. CT imaging was used to figure out its manufacturing techniques and to diagnose its condition, and accordingly the scientific conservation treatment was conducted to stabilize the artifact. The precise diagnosis on conservation condition found that there are two chips in the spout with their cracks extended. One of the chips is connected with separation added to the crack. The material which has been used for connection in the past was collected for the infrared spectroscopic analysis, which was identified to be nitrocellulose resin for the connection. Therefore, this conservation treatment focused on removing the old material and preventing the spread of cracks. Before conservation treatment, the condition survey and scientific examination for the artifact were carried out to secure data about the earthenware horn cup with horse head decorations(Treasure). Based on them, effective plans for its conservation treatment was sought for and then existing adhesive was safely removed, and restoration material was selected to take into account its reversibility. In addition, the conservation treatment according to optimal methodologies was conducted through the consultation meeting with experts.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.620-626
• /
• 2015

$Ho^{3+}$ doped $SrAl_2O_4$ upconversion phosphor powders were synthesized by spray pyrolysis, and the crystallographic properties and luminescence characteristics were examined by varying activator concentrations and heattreatment temperatures. The effect of organic additives on the crystal structure and luminescent properties was also investigated. $SrAl_2O_4:Ho^{3+}$ powders showed intensive green emission due to the $^5F_4/^5S_2{\rightarrow}^5I_8$ transition of $Ho^{3+}$. The optimal $Ho^{3+}$ concentration in order to achieve the highest luminescence was 0.1%. Over this concentration, emission intensities were largely diminished via a concentration quenching due to dipole-dipole interaction between activator ions. According to the dependence of emission intensity on the pumping power of a laser diode, it was clear that the upconversion of $SrAl_2O_4:Ho^{3+}$ occurred via the ground state absorption-excited state absorption processes involving two near-IR photons. Synthesized powders were monoclinic as a major phase, having some hexagonal phase. The increase of heat-treatment temperatures from $1000^{\circ}C$ to $1350^{\circ}C$ led to crystallinity enhancement of monoclinic phase, reducing hexagonal phase. The hexagonal phase, however, did not disappear even at $1350^{\circ}C$. When both citric acid (CA) and ethylene glycol (EG) were added to the spray solution, the resulting powders had pure monoclinic phase without forming hexagonal phase, and led to largely enhancement of crystallinity. Also, N,N-Dimethylformamide (DMF) addition to the spray solution containing both CA and EG made it possible to effectively reduce the surface area of $SrAl_2O_4:Ho^{3+}$ powders. Consequently, the $SrAl_2O_4:Ho^{3+}$ powders prepared by using the spray solution containing CA/EG/DMF mixture as the organic additives showed about 168% improved luminescence compared to the phosphor prepared without organic additives. It was concluded that both the increased crystallinity of high-purity monoclinic phase and the decrease of surface area were attributed to the large enhancement of upconversion luminescence.

• Journal of Animal Environmental Science
• /
• v.9 no.2
• /
• pp.103-112
• /
• 2003

In this study, the distributions of internal climates such as air temperature, humidity, dust, ammonia gas, and air velocity were systematically measured at a mechanically ventilated broiler houses during summer season, with local weather data. The analysis was focused on the suitability, stability, and uniformity of internal climate, resulting in serious stress on chickens and decrease of productivity In the mechanically ventilated broiler house, the difference between measured and recommended air temperatures(suitability) was 10.4C in maximum during the summer time. The difference of air temperature in the house between day and night was $8.7^{\circ}C$ in maximum. And maximal hourly range of internal air temperature at 0.4m height from the floor was $3.7^{\circ}C$ suggesting it maintained thermal uniformity in the broiler house. The $NH_3$ and dust concentrations were pretty low because ventilation was fully performed. The air speed at chicken location was measured 2.2m/s and 1.7m/s, respectively without and with chicken existence.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.88-88
• /
• 2002

인공수정 및 수정란기술의 활성화에 따라 소에 있어서 인공수정은 90%이상이 실시되고 있으나, 수정란이식은 수정란의 생산이 안정적이지 않아 활성화에 많은 지장을 초래하고 있다. 이의 원인은 수정란이식에 의한 수태율의 저하가 가장 크며, 수태율 향상을 위하여 수란우에 progesterone, hCG 등의 주사가 실시되고 있다. 그러나 이는 수정란의 착상에 있어서 자궁의 환경을 개선한다고 하나, 착상의 정확한 기전의 구명은 미미한 상태이다. 한편 비장유래 macrophage가 황체를 자극하고 TGF-$\beta$의 생산을 유도하는 것으로 보고되고 있으며, IL-I $\alpha$와 $\beta$에 따라 TGF-$\beta$ 생산에 있어서 약간의 차이를 보이는 것으로 보고되고 있다. 따라서 본 연구는 비장유래 macrophage가 TGF-$\beta$의 생산시 임신관련 Cytokine인 IL-I$\alpha$와의 관계를 조사하기 위하여 실시하였다. 임신 및 비임신 도축 암소의 비장을 채취하여 얼음에 채워 실험실로 운반한 후 비장의 표면을 70%의 알콜로 세척하고, 표피를 벗겨 비장조직을 세절하여 10% FBS+DMEM에 넣어 조직을 눌러 짜면서 조직속의 세포를 분리하였다. 세척한 배양액은 4-5$m\ell$를 100mm 유리 petri dish에 넣고 39$^{\circ}C$, 5% $CO_2$, 95% 공기인 배양기에서 2시간이상 배양하였으며, 배양 후 냉장된 buffer A 용액으로 세척하여 유리 petri dish의 바닥에 부착된 macrophage만을 cell scraper로 분리하였다. 분리한 macrophage는 0.5-1 $\times$ $10^{6}$ cells/$m\ell$가 되게 조정하여, IL-I 을 0.001, 0.01, 0.1 또한 1 ng/$m\ell$를 첨가하여 농도에 따른 효과를 조사하였고, 각각 24, 48, 72, 96 또한 120시간을 배양하여 시간에 의한 효과도 실시하였다. 각 배치구에서 얻어진 배양액은 TGF-$\beta$를 조사하기 전까지 -2$0^{\circ}C$에 동결 보존하였다. TGF-$\beta$의 측정은 TGF-$\beta$ kit(promega, USA)를 이용하여 실시하였으며, 통계학적 분석은 Anova test를 Statview program을 이용하여 분석하였다. 시험의 결과 대조구에 비해 IL-I 첨가구는 2-3배의 TGF-$\beta$생산을 보였으며, 배양시간에 따른 생산은 시간이 지남에 따라 약간 상승하는 경향을 보였으나, 유의적인 차이를 보이지는 않았다. 또한 IL-I의 농도에 따른 생산의 변화는 IL-I의 농도에 따라 약간의 차이를 보였고 유의적인 차이는 인정되지 않았다. 임신 및 비임신의 경우 임신우의 비장 macrophage가 비임신보다는 약간 상승하는 거스로 나타났다. 이상의 결과로 볼 때 IL-I $\alpha$ 는$\beta$subunit 보다 TGF-$\beta$ 생산에 있어서 서로 다른 양상을 보일 것으로 추정되며, IL-I은 macrophage의 직접적인 영향을 주기보다는 황체세포를 매개로 한 자궁에 TGF-$\beta$의 생산을 유도하는 것으로 사료되며, 임신관련 cytokine에 대한 다양한 연구가 요구되고 있다.