• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.11-18
• /
• 2021

A novel microwave dielectric composite material for ultra-low temperature co-fired ceramics (ULTCC) with (1-x)BaWO₄-xBaV₂O₆ (x=0.54~0.85) composition was prepared by firing a mixture of BaWO₄ and BaV₂O₆. Shrinkage tests showed that the ceramic composite begins to densify at a temperature as low as 550℃ and can be sintered at 650℃ with 98% of relative density under the influence of BaV₂O₆. X-ray diffraction analysis showed that BaWO₄ and BaV₂O₆ coexisted and no secondary phase was detected in the sintered bodies, implying good chemical compatibility between the two phases. Near-zero temperature coefficients of the resonant frequency (𝛕_f) could be achieved by controlling the relative content of the two phases, due to their positive and negative 𝛕_f values, respectively. With increasing BaV₂O₆ (x from 0.53 to 0.85), the 𝛕_f value of the composites increased from -7.54 to 14.49 ppm/℃, ε_r increased from 10.08 to 11.17 and the quality factor (Q×f value) decreased from 47,661 to 37,131 GHz. The best microwave dielectric properties were obtained for x=0.6 samples with ε_r=10.4, Q×f=44,090 GHz, and 𝛕_f=-2.38 ppm/℃. Chemical compatibility experiments showed the developed composites are compatible with aluminum electrode during co-firing process.

• Korean Journal of Environment and Ecology
• /
• v.35 no.6
• /
• pp.621-631
• /
• 2021

The purpose of this study is to survey and analyze acorn production and characteristics of the Quercus acuta Thunb. according to the need for information on seed supply and seedling cultivation during the restoration of warm broad-leaved forests. For the survey, a total of 30 seed traps with a surface area of 1 m² were set up, 3 in each of 10 quadrats (8 in Wando, 1 in Haenam, and 1 in Jindo). The acorns that fell in the seed trap at the end of each month were collected from August to December each year between 2013 to 2016. The collected acorns were then classified into sound, damaged, decayed, or empty grade, and the number of acorns produced was calculated. In the case of sound acorns, acorn traits, such as length, diameter and weight of acorns without cupule, were measured. Duncan's multiple tests of acorn production and characteristics were conducted for comparative analysis of the annual average values with the values by year, stand, month, and treatment plot. The annual number of acorn dropped into the seed traps in each quadrat from 2013 to 2016 was 5-350 acorns/3 m² in 2013, 17-551 acorns/3 m² in 2014, 5-454 acorns/3 m² in 2015, and 14-705 acorns/3 m² in 2016. There was a large difference in acorn production between the quadrats, presumably attributed to the difference in the amount of light received due to the density of trees in the square. Annual acorn production per area was 335,000 acorns/ha in 2013, 932,000 acorns/ha in 2014, 556,000 acorns/ha in 2015, and 1,037,000 acorns/ha in 2016. That was a sharp variation of acorn production in the two-year cycle. As the fluctuation in the production of Q. acuta showed simultaneity between stands, it is judged that Quercus acuta Thunb. had a clear cycle of fruitfulness and fruitiness between forest objects. September showed the biggest amount of fallen acorns and largest damage from insect pests, indicating that preventing early fall of acorns could increase the fruiting period and enable mass production of sound acorns. There was no significant difference between annual average acorn length in each region. In the case of the acorn diameter and weight, the average values of acorns from Haenam were significantly higher than those from Wando and Jindo. There was no significant difference in the average annual acorn characteristics by month, and the average annual acorn length, diameter, and weight in November were 19.72mm, 12.23mm, and 1.64g, respectively, the highest between August and November.

• Clean Technology
• /
• v.28 no.4
• /
• pp.309-315
• /
• 2022

Research was conducted to derive the optimal operation conditions and the optimal cathode for using a DSA electrode as an anode to minimize electrode consumption during the removal of nitrogen from wastewater by the electro-chemical method. Of the various electrodes tested as cathodes, brass was determined to be the optimal electrode. It had the highest NO₃-N removal rate and the lowest concentration of residual NH₃-N, a by-product when Cl is present in the solution. Investigating the effect of current density found that when the initial concentration of NO₃-N was 50 mg L^-1, the optimal current density was 15 mA cm^-2. In addition, current densities above 15 mA cm^-2 did not significantly affect the NO₃-N removal rate. The effect of electrolytes on removing NO₃-N and minimizing NH₃-N was investigated by using Na₂SO₄ and NaCl as electrolytes and varying the reaction times. When Na₂SO₄ and NaCl are mixed at a ratio of 1.0 g L^-1 to 0.5 g L^-1 and reacted for 90 min at a current density of 15 mA cm^-2 and an initial NO₃-N concentration of 50 mg L^-1, the removal rate of NO₃-N was about 48% and there was no residual NH₃-N. On the other hand, when using only 1.5 g L^-1 of NaCl as an electrolyte, the removal rate of NO₃-N was the highest at about 55% and there was no residual NH₃-N.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.1
• /
• pp.1-19
• /
• 2022

The Geumgang Pine (Pinus densiflora) Forest in Sogwang-ri, Uljin has traditionally been a pine tree protection area (prohibited forest) for timber production purposes, and is now designated and managed as a protected area for forest genetic resource conservation by the Korea Forest Service. This study, we analyzed topographical characteristics, existing vegetation, tree age, and plant community structure, and proposed a sustainable management method for the Geumgang Pine (Pinus densiflora) Forest in Sogwang-ri, Uljin for timber havesting purposes. The topographical characteristics of the target area were 36.7% ridges and 38.7% valleys; the ratio of ridges to valleys was similar, and the slopes formed 24.7% of the total area. The types of pine forest communities are divided into six types based on the progress of pine forest renewal, the competition with other species such as deciduous broadleaf trees, and the formation of layered structures. It has been confirmed that the age of the large-diameter pine trees (40~60cm in diameter) is approximately 60~70 years, which is relatively low. As a result of the analysis of the relative importance percentage and layered structure, differences depended on the progress of the pine forest renewal project, and not only the maintenance of the pine forest, but also the creation of a secondary growth forest, the density adjustment of pine trees, and the active management of competitive trees. The average basal area by the community was 12,642.1~25,424.4cm² for the tree layer and 1.8~1,956.5cm² for the low tree layer based on a quadrat of 400m². The difference in the basal area appeared to depend on the size and number of trees forming the tree layer and the degree of pine forest renewal (the degree of time elapsed after thinning pine trees). The average number of species that appeared in each community was 8.7-20.3; there were many species located in valleys, and the type competes with deciduous broadleaf trees due to the lack of management. The diversity of species ranged from 0.6915-1.0942, and was evaluated as low compared to pine communities in central temperate zones. In this paper, we determined the management goals of Geumgang Pine (Pinus densiflora) Forest in Sogwang-ri, Uljin to produce timber with high economic value, and suggested efficient vegetation management for continuous afforestation, the establishment of a timber production system, and improvement of wood production as a management direction.

• Sleep Medicine and Psychophysiology
• /
• v.28 no.2
• /
• pp.78-85
• /
• 2021

Objectives: When elderly patients show depressive symptoms, discrimination between depressive disorder and prodromal phase of Alzheimer's disease is important. We tested whether a quantitative electroencephalogram (qEEG) marker was associated with cerebral amyloid-β (Aβ) deposition in older adults with depression. Methods: Non-demented older individuals (≥ 55years) diagnosed with depression were included in the analyses (n = 63; 76.2% female; mean age ± standard deviation 73.7 ± 6.87 years). The participants were divided into Aβ+ (n = 32) and Aβ- (n = 31) groups based on amyloid PET assessment. EEG was recorded during the 7min eye-closed (EC) phase and 3min eye-open (EO) phase, and all EEG data were analyzed using Fourier transform spectral analysis. We tested interaction effects among Aβ positivity, condition (EC vs. EO), laterality (left, midline, or right), and polarity (frontal, central, or posterior) for EEG alpha band power. Then, the EC-to-EO alpha reactivity index (ARI) was examined as a neurophysiological marker for predicting Aβ+ in depressed older adults. Results: The mean power spectral density of the alpha band in EO phase showed a significant difference between the Aβ+ and Aβ- groups (F = 6.258, p = 0.015). A significant 3-way interaction was observed among Aβ positivity, condition, and laterality on alpha-band power after adjusting for age, sex, educational years, global cognitive function, medication use, and white matter hyperintensities on MRI (F = 3.720, p = 0.030). However, post-hoc analyses showed no significant difference in ARI according to Aβ status in any regions of interest. Conclusion: Among older adults with depression, increased power in EO phase alpha band was associated with Aβ positivity. However, EC-to-EO ARI was not confirmed as a predictor for Aβ+ in depressed older individuals. Future studies with larger samples are needed to confirm our results.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.497-503
• /
• 2022

This study was conducted to investigate the horticultural media + decomposed granite + reused rock wool in the following mixing ratio: Control = 100:0, M1 = 80:0:20, M2 = 60:30:10, M3 = 40:30:30, M4 = 30:40:30, M5 = 0:50:50 (reused rockwool : decomposed granite : horticultural media) and develop the physicochemical properties and the growth of 'Sulhyang' strawberry runner plant. In the physical aspect of the horticultural media, statistical differences were recognized that the bulk density and particle density were lower in the control and M1. But the bulk density and particle density were high in the M3, M4, and M5, because it had high mixing ratio between recycled rock wool and decomposed granite. EAW and WBC showed a similar tendency. The air porosity and total porosity were higher in control and M1 than M3, M4, M5. Exchangeable cation (K⁺, Ca²⁺, Na⁺, Mg²⁺) and base replacement capacity (CEC) were higher in control and M1, than M2, M3, M4, and M5. As a result of the cultivation of 'Sulhyang' runner plant, the plant length was long in M2, 32.1 cm and smaller than M5 to 28.4 cm. However, if the crown diameter, which is the growth indicator of the runner plant, all 6 treatments were formed 11.23 mm-12.03 mm, which is considered to be suitable for the growth of the runner plant. There wasn't a statistical difference between the weight and dry weight of the root. As a result, the growth difference of the seedlings by the horticulture media was similar. Therefore, considering the physical properties of the horticultural media, it was judged that the air porosity and total porosity would be improved when the recycled rock wool and the decomposed granite were properly mixed rather than the use of the horticultural media as a single medium, which would be advantageous for irrigation management.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.252-258
• /
• 1985

An experiment was conducted at the Yeongnam Crop Experiment Station to obtain basic informations about cultural techniques for high yielding by manipulating plant spacing using two rice cultivars, Samgangbyeo (Indica/Japonica type) and Nakdongbyeo (Japonica type), and four plant spacings, 10${\times}$10cm, 20${\times}$20cm 30${\times}$30cm and 40${\times}$40cm, with 4 kinds of seedling number per hill, 1,3,5 and 7, respectively. High photosynthetic efficiency (Eu) exhibited at the Samgangbyeo compared to Nakdongbyeo regardless of plant spacings and seedling numbers. For Samgangbyeo, Eu value was the highest at the 20${\times}$20cm plant spacing and five seedlings and seven seedlings per hill showed high Eu values at 10${\times}$10cm plant spacing and 20${\times}$20cm plant spacing, respectively, while other plant spacings were not significantly differed among seedling numbers. For Nakdongbyeo, however, one seedling plot obtained high Eu value at the 10${\times}$10cm plant spacing while this Eu value increased as the seedling number per hill increased in other plant spacings. There was a high positive correlation between rice grain yield and total competition index for both cultivars while kind of relationships differed in these two cultivars; linear relationship for Samgangbyeo and exponential relationship for Nakdongbyeo, respectively. Competition index between rice hill was more significant than within rice hill for Samgangbyeo while both competition indexs were important for Nakdongbyeo to increase rice yield.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.1
• /
• pp.77-86
• /
• 1980

Asking to change the cropping patterns to save the labor and capitals in paddy rice cultivation, the study was intended to know the weed problems under the various possible cultural systems; namely, direct seeding (in broadcast and row), machine transplanting and hand transplanting. Under the conditions as weedy check plots, paddy yields were significantly variated among cropping systems, and the functions of panicle No. and spikelet No. to the yield were neglected, among others. However, the yield and yield components were narrowed among cropping systems, and the function of spikelets number per area was comparatively improved to the others.

• Korean journal of applied entomology
• /
• v.24 no.2 s.63
• /
• pp.65-70
• /
• 1985

The locational preference of the brown planthopper (BPH) Nilaparvata lugens ($St{\aa}l$) and the whitebacked plant hopper (WBPH) Sogatella furcifera(Horvath) was studied on rice cultivars IR22 and IR36 as an integral part of subsequent research on insect-fungal pathogen relationships. The BPH was observed to stay consistently on the basal portion while the WBPH showed a general preference for the upper portion regardless of varieties, rice growth stages and insect population density levels. The habitat preference of both species (BPH and WBPH) was found not to be affected by the presence of the other species when both species are present on the same host plant Five rice cultivars with different reactions to BPH biotype 2 were used in the study on BPH-Rhizoctonia solani relationship: IR22 and TN1 (susceptible); Triveni and ASD7 (moderately resistant); and IR42 (resistant). Test plants were inoculated with R. solani (Kuhn) $3{\sim}4$days after insect infestation. Sheath blight disease severity/incidence was significantly higher in the treatment where BPH+R. solani were together than in the treatment with only the pathogen. Symptom expression of the disease in the BPH-pathogen combination was faster and mycelial growth was more profuse inducing the formation of more infection structures. Regardless of varietal reaction to BPH biotype 2, the degree of hopperburn was significantly higher in the combination of the two pests as compared with that of BPH alone. There could be a synergistic relationship between the insect pest and the pathogen indicated by a positive interaction between the two species.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.270-280
• /
• 1988

This experiment was conducted to evaluate the main effects and pleiotropic effects of two comparable isogenic lines for culm and spike length in hulled barley and observed various agronomic characteristics, yield and yield components under the conditions of heavy fertilizer application and high planting densities. Three isogenic lines, culm, spike and culm and spike, were planted and to obtain basic data for improving high-yielding and quality of hulled barley at Experiment Farm, Dankook Univ., Cheonan city in 1985. Differences of culm length between two comparable isogenic lines, short culmed line (SCL) and medium culmed line (MCL), in isogenic lines for culm length showed highly significant differences. And differences of spike length between two comparable isogenic lines, short spike line (SSL) and medium spike line (MSL), in isogenic lines for spike length showed highly significant differences. Differences of culm and spike length between two comparable isogenic lines, short culmed and spike line (SCSSL) and medium culmed and spike line (MCMSL), short culmed and spike line (SCSSL) and long culmed and spike line (LCLSL), in isogenic lines for culm and spike length showed highly significant differences. Characteristics affected highly by the genes of culm length in isogenic lines for culm length were heading days, the 1st and 2nd internode length, No. of grains per spike, No. of spikes/m$^2$, and one litre weight. Characteristics affected highly by the genes of spike length in isogenic lines for spike length were No. of spike nodes, heading days, maturity days, thousand grain weight and one litre weight. Characteristics affected highly by the genes of culm and spike length in isogenic lines for culm and spike length were No. of spike nodes, the 2nd, 3rd and 4th internode length, thousand grain weight and grain yield. Grain yield of SCL, MSL, MCMSL and SCSSL was more than grain yield of MCL, SSL, SCSSL and LCLSL, respectively. Maturity days of SCL, MSL, SCSSL and LSLSL were faster than maturity days of MCL, SSL, MCMSL and SCSSL, respectively.