• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.202-205
• /
• 2009

체력이나 건강을 위한 트레이닝이나 심장 질환자의 생체신호 모니터링을 위해 다양하게 사용되는 심전도는 현재 여러가지 장비형태로 사용되고 있다. 최근에는 착용자가 인식하지 않고 손쉽고 편안한 방법으로 측정하거나 모니터링 할 수 있는 형태의 생체신호 모니터링 의복에 관한 연구가 많이 진행되고 있다. 본 연구에서는 20대 남성의 체표면 분석을 통해 심전도 검출이 가능한 일체형 의복을 설계하고 제작된 시제품의 착의평가를 진행하였다. 심전도 측정이 가장 효과적인 흉부 부분을 중심으로 심전도 데이터 추출 정확성을 위해 다층구조로 센서를 설계하고, 흉부의 움직임을 최소화하여 노이즈를 감소할 수 있는 디자인을 제안한 결과, 심전도 데이터 추출 정확성 및 편의성은 향상되고 노이즈는 감소하는 결과를 도출하였다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.123-126
• /
• 2009

최근 생체 신호 센싱 기능의 의류가 연구 개발되어 왔으나, 생체 신호 측정 시 착용자의 동작에 의한 치명적인 잡음이 발생하는 문제가 지속적으로 보고되어 왔다. 이에 본 연구는 심전도 센싱 의류를 기반으로 생체 신호 측정의 정확성을 향상시키기 위하여 착용자의 동작에 의한 영향을 최소화할 수 있는 심전도 센싱 스마트 의류의 모형을 개발하고자 하였다. '일자형 절개 타입', '십자형 절개 타입', '엑스형 절개 타입', '곡선 엑스형 절개 타입'의 총 네 가지 타입의 생체신호 센싱 스마트 의류의 시안을 설계하고 제작하였다. 디자인 시안은 민소매 형태의 남성용 티셔츠로 신축성 있는 소재를 사용하여 인체 굴곡을 따라 의복과 전극이 밀착될 수 있도록 하였으며, 트랜스미터를 이용하여 메인 컴퓨터로 데이터가 무선 전송되게 하였다. 본 연구에서는 개발된 4 가지 의류 타임을 기반으로 인체의 정지 및 동작 상태에서의 심전도 센싱 성능을 평가하기 위해 동작에 따른 전극의 변위를 측정하고, 심전도 측정 평가를 실시하여 SNR을 분석하였다. 본 실험 곁과를 반영하여 의류 디자인 시안의 수정 및 보완 과정을 거친 후, 최종적으로 동작 잡음을 최소화하는 생체신호 센싱 스마트 의류 디자인 모형을 제시하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.5
• /
• pp.723-740
• /
• 2022

This study aimed to develop an Arduino-based garment pressure device (APD) on the basis of using Single-Tact sensor by suggesting the reliable clothing pressure range and coefficient of selected sensors through the APD calibration process. Once the APD was validated, the pressure of the experimental men's lower body compression wears was measured using the APD and was compared to the pressure measured using the existing air-pack type pressure meter. The subjects were one mannequin and eight men in their 20's, and the trial compression wears were calf sleeves and pants. Clothing pressures were measured in hip, mid-thigh, calf, and ankle. In terms of the 99% confidence level, the experimental clothing pressure measured at the designated measuring points using the APD was considered identical to the one measured using an existing clothing pressure meter. Therefore, on the basis of the experiment results, this study demonstrated that the APD is as reliable as the existing clothing pressure meter within the pressure ranges of 0.54-16.79 kPa and 0.18-25.47 kPa as provided by the SingleTact sensor supplier's data on the basis of using an external ADC (Analog to Digital Converter) module.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.277-285
• /
• 2012

This research studied how to develop tight upper sportswear from 3D scan data considering fabric stretch property. Subjects were five Korean men of average figure in their 20's. Scanning was done for ten postures via vitus smart/pro(Techmath LTD). Analyzing from 3D scan data, more than 70% of the upper body surface showed surface change rate under 20%. It was shoulder and under arm side part that showed most noticeable body surface change when moving. A parametric model with convex surface was generated and flattened onto the plane, resulting 2D pattern. The error rate occurring in the process of 3D to 2D conversion was 0.2% for outline and 0.13% for area, respectively. Thirteen kinds of stretchable fabrics in the market were collected for this study. Stretch property was in the range of 16.0~58.2% for wale direction; 23.1~78.4% for course. Based on wear trial test, four fabrics were chosen for making the 1st experimental garment and finally one fabric was chosen for the 2nd one, which was developed applying 4 kinds of crosswise reduction rate on 2D pattern: 0, 5, 10, and 15%. Through wear trial test and garment pressure measurement, experimental garment applied with 10% pattern reduction rate was evaluated as most comfortable and considerable.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.929-938
• /
• 2017

This research investigated the effects of cool touch fabrics on thermo-regulating physical properties and subjective evaluation using a 3D fitted women's T-shirts in wear test. Qmax, clothing microclimate, microclimate wettedness, thermogram and subjective vote were observed during rest-right after an exercise-rest protocol. As a result, there was no single determining physical variable to explain the reasons of cool sensations of T-shirts made of cool touch fabric across the entire protocol. Qmax could partly predict a wear sensation at the initial stage when only insensible perspiration was presented. Simultaneous observation of temperature/humidity gradient understand from the inside to the outside of the clothing layer or microclimate wettedness calculated using vapor pressure were helpful to figure out the performance of cool touch fabric, especially at the later stage of the protocol when sweating was excessive. It was especially difficult to connect thermo-regulating physical variables to the subjective evaluation during transient conditions such as 'right after exercise' stage. It is necessary to measure the amount of heat and moisture transferred from the skin to the outside of clothing along with the physical properties measured in this study to understand the detailed mechanisms of why a cool sensation is evoked from tight fitting T-shirts made of newly developed cool touch fabrics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.2
• /
• pp.240-257
• /
• 2016

This study determines the effect of 3D compression pants and Kinesio taping on muscular function of the leg during knee joint flexion and extension. Eight males participated in the experiment, wearing basic pants (BP), Kinesio taping on bare skin (KT), 3D compression pants with (KTP) and without Kinesio taping (CP). The test protocol for isokinetic muscular function was composed of four sets at three angular velocities (60, 180, $240^{\circ}/sec$) using Cybex 660. Peak torque and work per repetition of the lower limbs of eight males were analyzed from the result of Cybex. Agility and power of the subjects were examined from side step and sergeant jump. Peak torque, average power, work per repetition, force decay time of subjects wearing CP and KTP were significantly better than BP or KT, especially at low angular velocity of $60^{\circ}/sec$. The time to generate peak torque of subjects wearing BP was the longest, while the force-decay time of BP was the shortest. The application of Kinesio tape on skin did not increase muscle peak torque, work and power, but did shorten the time to generate peak torque.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1824-1835
• /
• 2010

This study develops tight-fitting torso patterns for performance garments by taking into account the skin deformation generated directly from a 3D scan during arm movements. The skin deformation caused during the arm movements was scanned after scanning the skin surface stamped with a circle. To create a torso pattern in response to skin deformation, the ratio and direction of the skin deformation were first measured and analyzed so that the 3D human body could be segmented. After translating, the 3D skin surface was segmented into 2D flat patterns, designing nude patterns and reducing them as well as tight-fitting shirts: the skin deformation segment shirts were made in response to the skin deformation. The features of the fabric deformation and the garment pressure were analyzed and evaluated. In comparison with a clothing construction segment shirt, the diameter of the skin deformation segment shirt was smaller as well the ratios of extension and reduction was less. The garment pressure of the skin deformation segment shirt was higher. The skin deformation segment shirt fitted more tightly compared to a clothing construction segment shirt as it covered the body more thoroughly and was as comfortable as the other shirts with less fabric deformation made as the body moved.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.1
• /
• pp.112-125
• /
• 2010

A Holter monitor is used for ECG monitoring of ambulatory daily life in hospital. However, the use of this apparatus causes skin allergies and discomfort in patients because of the attachment gel and tapes used to attach disposable electrodes to the skin. In this study, the development of tight-fitting clothing connected to a portable Holter monitor was proposed. In addition, the use of conductive fabrics as electrodes was proposed; this will enable the use of garments in u-health care for measuring ECG signals. The male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales. A Likert type scale was used for the evaluation and a 7 point score indicates that it provided the best fit as a tight-fitting upper clothing. Clothing pressure was measured using an air-pack-type pressure sensor (model AMI 3037-2) at 4 locations (the conductive fabric electrode) As results, a male basic sloper for upper clothing was developed and that pattern was manipulated to the tight fit pattern by considering the reduction rate of the percentage stretch in the fabric. The developed tight-fitting garment was superior in terms of subjective sensation and 6t. The mean pressure of the garment with reduction rates of 40% in width and of 50% in length was 8.45gf/$cm^2$. A conductive fabric electrode was developed by considering the sewing method and the developed electrode was detected well. The ECG data were recorded for 13 hr 19 min 44 sec and the artifacts in the ECG signals were recorded for 9 hr 3 min 46 sec (total time: 22 hr 23 min 23 sec). The artifacts data were obtained during heavy activities.

• Science of Emotion and Sensibility
• /
• v.13 no.3
• /
• pp.467-474
• /
• 2010

Recently, Study of functional clothing for Vital sensing is focused on reducing artifact by human motions, in order to enhance the electrocardiogram(ECG) sensing accuracy. In this study, considering the factors for each element found from the analysis, a 3-lead electrode inside textile embroidered with silver yarn was developed, and draft designs off our types of vital-signal sensing garments, which are 'chest-belt typed' garment, 'cross-typed' garment 'x-typed' garment and 'curved x-typed' garment, were prepared. The draft designs were implemented on a sleeveless male shirt made of an elastic material so that the garment and the electrodes can remain closely attached along the contour of the human body, and the acquired data was sent to the main computer over a wireless network. In order to evaluate the effects caused by body movements and the ECG-sensing capability for each type in static and dynamic states, displacements were measured from one and two dimensional perspectives. ECG measurement evaluation was also performed for Signal-to-noise ratio(SNR) analysis. Applying the experimental results, the draft garment designs were modified and complemented to produce two types of modular approaches 'continuous-attached' and 'insertion-detached' for the ECG-sensing smart clothing.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.267-268
• /
• 2019

본 연구에서는 신체밀착형 의복의 유행으로 맞음새가 우수한 의복의 중요성이 부각되고 있는 20대 나성을 대상으로, Size Korea의 제 7차 인체치수조사 계측데이터를 분석하여 전신 체형의 특성을 알아보고, 전신 체형을 유형화하고자 하였다. 이를 통해 20대 전반 남성의 의복 제작에 필요한 기초자료를 제공하고자 하였다. 20대 남성의 체형은 4개로 분류되었다. 유형 1은 둘레 및 너비요인의 적재량이 높고, 몸통길이와 발목/종아리 굵기, 엉덩이처짐 요인 높이 요인의 적재량이 낮은 '짧고 굵은 몸통새다리 체형'이다. 유형 2는 어깨너비와 길이, 몸통길이의 적재량이 높고, 둘레 및 너비와 어깨처짐 요인의 적재량이 낮으며, 높이요인의 적재량이 높은 '가는 역삼각형 체형'이다. 유형 3은 발목/종아리 굵기 요인의 적재량이 높고, 높이요인, 둘레 및 너비와 몸통길이 요인의 적재량이 낮은 '짧고 가는 몸통 굵은 다리 체형'이다. 유형 4는 높이요인과 엉덩이처짐, 어깨처짐 요인의 적재량이 높고 어깨너비와 길이 요인의 적재량이 낮은 '긴 삼각형 체형'이다.