• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.5
• /
• pp.623-628
• /
• 2006

Laser material processing is a very fast advancing technology for various industrial applications. because of many advantages. Its major advantage of less and controlled heat input has been exploited successfully for the very critical application of aluminium alloy welding. This study suggested the occurrence source of weld-defects and its solution methods in a welding of lithium ion battery by pulsed Nd:YAG laser. In experiment. battery case has changed over joint geometry from welding of side position to flat one. In the case of a electrolyte injection hole in order to seal it. welding is carried out after pressing Al ball. At this time. an eccentric degree. contact length and gap are worked as a major parameters. As improving the method of Al ball pressing. it was able to reduce an eccentricity. increase the contact length and decrease gap. As a results of a experiment. a sound weld bead shape and crack-free weld bead can be obtained.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.339-343
• /
• 2005

Laser material processing is a very fast growing technology for various industrial applications, because of many advantages. Its major advantage of less and controlled heat input has been exploited successfully for the very critical application of aluminium alloy welding. This study suggested the occurrence source of weld-defects and its solution methods in a welding of lithium ion battery by pulsed Nd:YAG laser. In experiment, battery case has changed over joint geometry from welding of side position to flat one. In case of a electrolyte injection hole in order to seal it, welding is carried out after pressing Al ball. At this time, an eccentric degree, contact length and gap are worked as a major parameters. As improving the method of Al ball pressing, it was able to reduce an eccentricity, increase the contact length and decrease gap. As a results of a experiment, a sound weld bead shape and crack-free weld bead can be obtained.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2005.04a
• /
• pp.42-46
• /
• 2005

The Dose calculation program for the Buchler remote after-loading system was developed. We use iridium source for the tandem and cessium for the ovoids. We determined the source length and distributions by dividing the program disk to 72 points. The dose rate for the each program disk were calculated and stored to the tables for the xy coordinates. The dose rate for the interesting points for the patients were calculated by using these tables. We also made isodose curve from the calculations. By using the program, we could calculate the dose rate for the various points of the patient quickly and accurately.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.285-290
• /
• 2008

The purpose of this paper is to present the case study of tribological failure analysis on the gear damages, oil leakage, and sealant sealing in a manual transmission of front engine and front wheel drive vehicle. The manual transmission is to change the speed range and direction of the engines depending on the driving conditions by friction driving forces with input and output gear system. The material property and surface roughness of the gears are strongly related to the gear noise and micro-vibration, oil leakage and wear, which may decrease the real contact area of the gear and the strength of the oil film thickness between the driving gear and driven one. The O-ring damage of speedometer driven gear and bad sealant sealing of oil pan may produce oil leakage through the contact surfaces, which cause the oil shortage and seizure on the sliding surfaces of the transaxle gears. In the failure case study, the proper repair working and good lubrication are very important for the long life of the transaxle without any tribological failures and oil leakage.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.610-614
• /
• 1996

Sealing of lubricat-air mixture in the high performance machining conte is one of most the important characteristics to carry out enhanced lubrication. High speed spindle requires non-contact type of sealing mechanism. Evaluating an optimum seal design to minimize leakage is concerned in the aspect of flow control. Effect of geometry and leakage path are evaluated according to variation of sealing geometry, Velocity, pressure, turbulence intensity of profile is calculated to fina more efficient geometry and variables. This offers a methodological way of enhancement seal design for high speed spindle. The working fluid is regarded as two phases that are mixed flow of oil phase and air phase. It is more reasonable to simulate an oil jet or oil mist type high speed spindle lubrication. Turbulence and compressible flow model are used to evaluate a flow characteristic, This paper arranges a geometry of mostly used non-contact type seal and analyzes leakage characteristics to minimize a leakage on the same sealing area.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.372-375
• /
• 2009

반도체 봉지재란 실리콘 칩, 골드와이어, 리드프레임 등의 반도체 소지를 열, 수분, 충격으로부터 보호하기 위해 밀봉하는 재료로서 EMC(Epoxy Moding Compound)가 가장 많이 쓰인다. EMC는 기계적, 전기적 성능향상을 위한 무기재료로 실리카(Silica), 열에 의해 경화되어 3차원 경화구조를 형성하는 에폭시수지, 빠른 경화특성을 부여하기 위한 경화제로서의 페놀수지, 유기재료와 무기재료 사이의 결합력을 높이기 위해 커플링제, 카본블랙, 이형성 확보를 위한 왁스(Wax), 착색제(Colorant), 난연제(Flame Retardant)등의 첨가제로 구성되는 복합소재로써 본 연구에서는 에폭시의 유형에 따른 용융 실리카를 주충진재로 하여 각각의 봉지재의 첨가제를 기준으로 할 때 다양한 형태의 친환경 비할로겐계 반응형 난연제를 합성하는 기술을 개발하고 비 할로겐계 및 Sb 계 첨가형 난연제의 혼용 배합을 통해 친환경 EMC용 난연제의 제조기술을 개발하였다. 이들 EMC의 요구특성은 요구특성은 외부환경으로부터 칩 보호, 칩을 전기적으로 절연특성 유지, 칩의 작동시 발생되는 열의 효과적인 방출 특성 유지, 실장(Board Mounting)의 간편성 특성을 확보해야 하는 특성을 지니고 있어 이들 요구특성에 적합한 특성조사가 함께 이루어졌다.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.483-496
• /
• 1993

Dentin hypersensitivity medicaments such as Gluma, Scotchbond 2, All-Bond 2, which are resin adhesives, were used to compare the sealing effects of dentinal tubule under mechanical stress. Topical application of above medicaments on the dentin surfaces of extracted teeth followed by artificial tooth brushing for 6 weeks was performed for the comparison. The following conclusions on the degree of dentinal tubule exposure versus time by were reached by using polyvinyl siloxane impression material for taking the impression, epoxy resin for the duplication and SEM for observing the surface. 1. SEM was used to compare the accuracy of the duplicated surface, but no differences were found when teeth samples and the duplicated surfaces were observed. 2. After comparing the degree of dentinal tubules exposure with varnish applied contrast group, resin adhesive materials showed much less exposure as time went by. 3. The results indicated that AU-Bond 2 adhesive, under mechanical stress, showed lesser exposure of dentinal tubules comparing with Gluma and Scotchbond 2 adhesives After the results were put together, it was demonstrated that resin replica method is an useful way to evaluate the treatment effects of the dentinal tubule hypersensitivity medicaments. Also, it was noticed that under mechanical stress, All-Bond 2, classified as fourth generation, illustrated the best dentinal tubules sealing effects.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.586-588
• /
• 2000

본 논문은 전자 패키징의 방열 성능을 개선하기 위하여 초소형 히트 파이프를 제작하고 열전달 성능을 시험한 결과를 보여준다. IC 칩이 점점 고성능화되고 고집적화되어 감에 따라 발열 문제가 대두되는데, 이 열은 전도만으로는 충분히 소산시킬 수 없고 패키징 표면에 별도의 장치를 장착하는 것은 시스템 소형화의 장애 요소가 된다. 따라서, 고성능 칩 개발을 위한 선결 과제로 고성능 초소형 냉각 장치가 요구되고 있다. 히트파이프는 밀봉된 파이프 내의 2상 유동과 상변화 잠열을 이용하여 열원으로부터 히트 싱크로 열을 효과적으로 전달하는 열교환 장치이다. 본 논문에서는 전자 패키징 내에 집적화할 수 있도록 초소형 히트 파이프 어레이를 제작하여 그 성능을 시험한 결과 증발부의 온도가 $12.1^{\circ}C$ 감소됨을 보인다.

• Journal of the Korean Ceramic Society
• /
• v.37 no.9
• /
• pp.847-855
• /
• 2000

80$0^{\circ}C$에서 작동하는 중온형 SOFC(Solid Oxide Fuel Cell) 단전지의 제조공정을 확립하고 그 출력특성을 평가하였다. 중온형 SOFC에서 문제가 되는 전해질 성분에 의한 출력 감소를 최소화하기 위해 음극기판 위에 7-15$\mu\textrm{m}$ 두께의 얇은 YSZ막을 입히는 음극지지형 SOFC를 구성하였다. 산화, 환원 반응이 일어나는 전극에서는 전극반응에 필요한 유효면적을 최대화하여 분극 저항을 줄일 수 있도록 음극으로는 Ni-YSZ 복합체를, 양극으로는 LSM-YSZ 복합체를 사용하였다. 출력특성 평가를 위한 단전지 홀더는 Inconnel을 가공하여 사용하였으며 80$0^{\circ}C$에서 최적의 밀봉효과를 나타낼 유리밀봉재를 개발하여 사용하였다. 제조한 단전지의 단면적은 5$\times$5$\textrm{cm}^2$, 10$\times$10$\textrm{cm}^2$ 두 종류였으며 운전 시험결과 5$\times$5 단전지의 경우는 최고 0.2W/$\textrm{cm}^2$, 10$\times$10 단전지의 경우는 0.12W/$\textrm{cm}^2$ 정도의 출력밀도를 나타내었다. 단전지의 출력 및 장기 안정성은 전극구조의 변화 및 단전지 홀더의 산화에 따른 접촉 저항 변화에 크게 영향을 받는 것으로 나타났으며 운전중의 연료공급 및 작동온도 변화 등에 의한 영향도 큰 것으로 나타났다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.321-321
• /
• 2013

열전재료는 열과 전기의 변환이 상호 가역적으로 일어나는 현상을 갖는 재료로서, 사용온도별로 여러 가지 재료가 개발되고 있다. 중온 영역에서 우수한 열전특성을 보이는 skutterudite는 격자 내에 2개의 공극을 갖고 있고 이에 적절한 원자를 충진하여 포논산란을 유도하고, PGEC(phonon-glass and electron-crystal) 개념을 적용하여 재료의 열적인 성질과 전기적인 성질을 동시에 제어함으로써 열전성능의 향상을 도모할 수 있는 재료이다. 본 연구에서는 챔버 내부 기체를 연속적으로 뽑아내어 진공도를 유지하는 방식이 아닌, 석영관을 앰플화한 진공밀폐 용해법을 사용하였다. 진공밀폐 용해법은 성분원소의 산화와 휘발을 억제하는데 있어 매우 유용한 공정이다. 용해를 통해 얻어진 잉곳을 용해와 동일한 방법으로 석영관에 밀봉하여 873 K에서 100시간 동안 진공열처리를 실시하였다. 또한, 합성된 잉곳의 기계적 특성 향상을 위해 $75{\mu}m$ 이하로 파쇄하여 진공 열간 압축 소결하였다. La가 충진된 $La_zCo_4Sb_{12}$ Skutterudites 단일상을 합성하여 La의 충진량(z)에 따른 열전특성과 전자이동특성을 조사하였다.